Reconstruction of Holocene paleohydrological and sedimentological characteristics of Umm Ar-Rimam basin (northern Kuwait)

The paleohydrological and sedimentological characteristics of a playa lake in northern Kuwait (Arabian Gulf) are reconstructed using sedimentological, geochemical, and isotopic techniques. The sequence consists of up to 8 cycles of S-poor, alluvial sediments capped by a thin organic soil interbedded with gravity-fall calcrete sediments. The succession is locally derived from mainly Quaternary sediments and is regressive with upsection filling of the subsiding basin by cycles of sheetwash flow in response to climatic change. There is no natural, open-water lake water as indicated by low total organic carbon (TOC) data, but the presence of incised calcrete yardangs suggests that more extensive open-water conditions were operative in the past. Stable isotope (δ¹⁸O‰ and δ¹³C‰) values of the authigenic carbonates indicate the following three distinct processes: evaporation, meteoric fluid infiltration, and rapid per-descensum flow (rapid downward movement of water and playa sediment through pipes) through a porous, clastic sequence. Because evaporites are scarce, other factors besides evaporation action control chemical and isotopic compositions of the per-decensum lake fluids. Consequently, the isotopic composition cannot be interpreted exclusively as an indicator of salinity or evaporation ratio. The degassing of CO₂ during groundwater discharge may explain the enriched carbon isotope values for the authigenic carbonates precipitated in the sediments. Hydrologically closed lake water bodies tend to show low negative carbonate oxygen and carbon isotopic signatures. Isotopically negative δ¹³C values imply a strong input of soil-zone carbon to the groundwater of the top 60 cm of the sediment. Lakes that are hydrologically closed and evaporate or equilibrate with atmospheric CO₂ will tend to have low negative δ¹⁸O and δ¹³C values in the carbonates as reported by Talbot (Chem Geol: Isotope Geosci Sect 80(4):261–279, 1990). Biologically active lakes will tend toward lower δ¹³C of dissolved carbon due to the photosynthetic effects of ¹²C withdrawal as reported by Dunagan and Driese (J Sed Res 69:772–783, 1999). Increased biological activity during sedimentation may account for low carbon isotope values where plants were abundant, but in shrinkage-dominated systems (those of clay-rich soil subjecting to wet-dry conditions), carbon isotopes will be largely inherited from the calcretic limestones in the land extending landward of the coast and not influenced by coastal processes (known as hinterland), such as Umm Ar-Rimam depression. This basin does not fit the classic shallow playa-type basins of the Arabian Peninsula but rather the recharge playas of the southwestern USA.     

No consensus on consensus: the challenge of finding a universal approach to measuring and mapping ensemble consistency in GCM projections

Communicating information about consistency in projections is crucial to the successful understanding, interpretation and appropriate application of information from climate models about future climate and its uncertainties. However, mapping the consistency of model projections in such a way that this information is communicated clearly remains a challenge that several recently published papers have sought to address in the run up to the IPCC AR5. We highlight that three remaining issues have not been fully addressed by the literature to date. Allen and Ingram (Nature 419:224, 2002) While additional information about regions where projected changes in rainfall are not ‘statistically significant’ can provide useful information for policy, the spatial scale at which changes are assessed has a substantial impact on the signal-to-noise ratio, and thus the detectability of changes. We demonstrate that by spatially smoothing the model projections we can provide more information about the nature of the signal for larger regions of the world. Christensen et al. (2007) Combining information about magnitude, consistency and statistical significance of projected changes in a single map can cause reduced legibility. We demonstrate the difficulty in finding a ‘universal’ method suitable for a wide range of audiences DEFRA (2012) We highlight that regions where projected changes in average rainfall are not statistically significant, changes in variability may still cause significant impacts. We stress the need to communicate this effectively in order to avoid mis-leading users. Finally, we comment on regions of the world where messages for users of climate information about ensemble consistency have changed since AR4, noting that these changes are due largely to changes in the methods of measuring consistency rather than any discernable differences between the CMIP3 and CMIP5 ensembles.     

Development of large‐scale seismites in Upper Cretaceous fluvial sandstones in a fault‐proximal setting

Large‐scale soft‐sediment deformation structures occur within fluvial sandstone bodies of the Upper Cretaceous Wahweap Formation in the Kaiparowits basin, southern Utah, USA. These structures represent an exceptional example of metre‐scale fault‐proximal, seismogenic load structures in nearly homogenous sandstones. The load structures consist of two types: large‐scale load casts and wedge‐shaped load structures. Large‐scale load casts penetrate up to 4·5 m into the underlying sandstone bed. Wedge‐shaped load structures include metre‐scale, parallel, sub‐vertical features and decimetre‐scale features along the periphery of the large‐scale load casts or other wedge‐shaped load structures. Wedge‐shaped load structures contain well‐developed, medial cataclastic shear deformation bands. All load structures contain pervasive well‐defined millimetre‐thick to centimetre‐thick internal laminae, oriented parallel to the outside form of the load structures and asymptotic to deformation bands. Both types of load structures formed because of an inverted density profile, earthquake‐triggered liquefaction and growth of irregularities (a Rayleigh–Taylor instability) on the sandstone–sandstone erosional contact. The internal laminae and deformation bands formed during deformation and clearly demonstrate polyphase deformation, recording a transition from liquefied to hydroplastic to brittle modes of deformation. Decimetre‐scale wedge‐shaped load structures on the edge of the large‐scale load casts probably formed towards the end of a seismic event after the sediment dewatered and increased the frictional contact of grains enough to impart strength to the sands. Metre‐scale wedge‐shaped load structures were created as the tips of downward foundering sediments were driven into fractures, which widened incrementally with seismic pulsation. With each widening of the fracture, gravity and a suction effect would draw additional sediment into the fracture. Superimposed laminae indicate a secondary syndeformational origin for internal laminae, probably by flow‐generated shearing and vibrofluidization mechanisms. Large‐scale and wedge‐shaped load structures, polyphase deformation and secondary laminae may characterize soft‐sediment deformation in certain fault‐proximal settings.     

Electrochemical detection of harmful algae and other microbial contaminants in coastal waters using hand-held biosensors

Standard methods to identify microbial contaminants in the environment are slow, laborious, and can require specialized expertise. This study investigated electrochemical detection of microbial contaminants using commercially available, hand-held instruments. Electrochemical assays were developed for a red tide dinoflagellate (Karenia brevis), fecal-indicating bacteria (Enterococcus spp.), markers indicative of human sources of fecal pollution (human cluster Bacteroides and the esp gene of Enterococcus faecium), bacterial pathogens (Escherichia coli 0157:H7, Salmonella spp., Campylobacter jejuni, Staphylococcus aureus), and a viral pathogen (adenovirus). For K. brevis, two assay formats (Rapid PCR-Detect and Hybrid PCR-Detect) were tested and both provided detection limits of 10 genome equivalents for DNA isolated from K. brevis culture and amplified by PCR. Sensitivity with coastal water samples was sufficient to detect K. brevis that was "present" (相似文献   

The convergence of GIS and social media: challenges for GIScience

It is hard to believe that 10 years have passed since we wrote our guest editorial for IJGIS (Sui and Goodchild 2001 Sui, D.Z. and Goodchild, M.F. 2001. Are GIS becoming new media?. International Journal of Geographical Information Science, 15(5): 387–390. [Taylor & Francis Online], [Web of Science ®] , [Google Scholar]). Using the nascent evidence that emerged in the late 1990s, we speculated back in 2001 that geographic information systems (GIS) were rapidly becoming part of the mass media. On the basis of the proposition of GIS as media, we were able to link GIScience with theories in media studies such as Marshall McLuhan's law of the media, which considers modern media as modifiable perceptive extensions of human thought (Sui and Goodchild 2003 Sui, D.Z. and Goodchild, M.F. 2003. A tetradic analysis of GIS and society using McLuhan's law of media. Canadian Geographers, 47(1): 5–17. [Crossref], [Web of Science ®] , [Google Scholar]). Remarkable conceptual and technological advances in GIS have been made during the past 10 years. The goal of this review is to provide an update on the ‘GIS as media’ argument we made 10 years ago and to discuss the new challenges for GIScience posed by the growing convergence of GIS and social media.     

Impact of model development,calibration and validation decisions on hydrological simulations in West Lake Erie Basin

Watershed simulation models are used extensively to investigate hydrologic processes, landuse and climate change impacts, pollutant load assessments and best management practices (BMPs). Developing, calibrating and validating these models require a number of critical decisions that will influence the ability of the model to represent real world conditions. Understanding how these decisions influence model performance is crucial, especially when making science‐based policy decisions. This study used the Soil and Water Assessment Tool (SWAT) model in West Lake Erie Basin (WLEB) to examine the influence of several of these decisions on hydrological processes and streamflow simulations. Specifically, this study addressed the following objectives (1) demonstrate the importance of considering intra‐watershed processes during model development, (2) compare and evaluated spatial calibration versus calibration at outlet and (3) evaluate parameter transfers across temporal and spatial scales. A coarser resolution (HUC‐12) model and a finer resolution model (NHDPlus model) were used to support the objectives. Results showed that knowledge of watershed characteristics and intra‐watershed processes are critical to produced accurate and realistic hydrologic simulations. The spatial calibration strategy produced better results compared to outlet calibration strategy and provided more confidence. Transferring parameter values across spatial scales (i.e. from coarser resolution model to finer resolution model) needs additional fine tuning to produce realistic results. Transferring parameters across temporal scales (i.e. from monthly to yearly and daily time‐steps) performed well with a similar spatial resolution model. Furthermore, this study shows that relying solely on quantitative statistics without considering additional information can produce good but unrealistic simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

“Lessons for marine conservation planning: A comparison of three marine protected area planning processes”

Various approaches have been used to establish marine protected areas (MPAs) in different countries. In this paper we compare and review three processes to establish MPAs within the United States and Australia. These two countries share many similarities in their cultures, but their approaches to managing marine resources differ considerably. Each of these efforts to establish or review MPAs was motivated by concern about declines of targeted marine species or habitats. However, the government actions varied because of differences in governance, planning process including public input, and the role of science. Comparing these processes highlights effective approaches for protecting marine ecosystems and gaining public support.     

Stratigraphy of total metals in PIRLA sediment cores

Sediment cores from 30 low-alkalinity lakes in northern New England (NE), New York (NY), the northern Great Lakes States (NGLS) of Minnesota, Michigan, and Wisconsin, and Florida (FL) have been dated by ²¹⁰Pb and analyzed for water and organic content, eight major elements (Al, Ti, Fe, Mn, Ca, Mg, Na, K) plus four trace metals (Pb, Zn, Cu, and V). Variations in the percentages of major elements through time are dominated by long-term independent variations in the abundance of SiO₂, FeO, and to a lesser extent Ca and Al. Additional variations are caused by varying proportions of inorganic matter. Major variations in chemistry are generally unrelated to documented distrubances in the watersheds; most disturbances are minor fires or selective logging.Accelerated accumulation of Pb from atmospheric sources into sediment first occurs in sediment dated between 1800 and 1850 in NY and NE, slightly later in the NGLS region, and about 1900 in FL. Modern accumulation rates in all areas are comparable (ca. 1 to 4 g cm^–2 yr^–1). Accumulation rates of Pb in some lakes have declined significantly from 1975 to 1985. Atmospheric deposition of anthropogenic Zn and Cu is also indicated by generally increasing accumulation rates in sediment cores, but the record is not as clear nor are chemical profiles in all lakes parallel to the trends in atmospheric emissions inferred on the basis of fossil fuel consumption, smelting, and other industrial activities. Inter-lake variations in profiles of Cu and Zn are large. Vanadium accumulation rates increase by the 1940s in NY and NE, but not until the 1950s in the NGLS region. This timing correlates with regional trends in the combustion of fuel oil, a major source of atmospheric V.Acidification of some of the lakes is suggested by decreases in the concentration and accumulation rates of Mn, Ca, and Zn in recent sediment, relative to other elements of catchment origin. The decreases generally occur slightly before the onset of acidification as indicated by diatoms. Increased sediment accumulation rates for Fe may indicate the acidification of watershed soils. The use of the accumulation rate of TiO₂ as an indicator of rates of erosion and for normalization of trace metal accumulation rates is in question for lakes where the flux of TiO₂ from the atmosphere varies and is a significant fraction of the total flux of TiO₂ to the sediment.This is the thirteenth of a series of papers to be published by this journal which is a contribution of the Paleoecological Investigation of Recent Lake Acidification (PIRLA) project. Drs. D. F. Charles and D. R. Whitehead are guest editors for this series.     

The effect of landscape and hydrologic variables on the prehistoric Salado: Geoarchaeological investigations in the Tonto Basin,Arizona

Geoarchaeological investigations in the Tonto Basin, Arizona provide insights into the Classic period Salado occupation from A.D. 1150 to 1450. Geomorphic reconstructions show that the Salado pursued irrigation agriculture on an intermediate Holocene terrace that was protected from flooding, while permanent settlements were located on stable Pleistocene landforms overlooking the field areas. Carrying-capacity-based calculations show that the population during the Classic period numbered in the low thousands. The development and subsequent cultural changes during the Classic period are tied to streamflow variations and cultural factors. The final abandonment of the Tonto Basin around A.D. 1450 is not the result of a major landscape change, but instead is linked to high frequency hydrologic variations that influenced food production coupled with cultural factors. © 1998 John Wiley & Sons, Inc.     

A finite element approach to the simulation of hydraulic fractures with lag

We presented a finite‐element‐based algorithm to simulate plane‐strain, straight hydraulic fractures in an impermeable elastic medium. The algorithm accounts for the nonlinear coupling between the fluid pressure and the crack opening and separately tracks the evolution of the crack tip and the fluid front. It therefore allows the existence of a fluid lag. The fluid front is advanced explicitly in time, but an implicit strategy is needed for the crack tip to guarantee the satisfaction of Griffith's criterion at each time step. We enforced the coupling between the fluid and the rock by simultaneously solving for the pressure field in the fluid and the crack opening at each time step. We provided verification of our algorithm by performing sample simulations and comparing them with two known similarity solutions. Copyright © 2012 John Wiley & Sons, Ltd.