OSCR wave measurements-some preliminary results

OSCR is an HF radar system that has been developed for high spatial resolution coastal surface current measurement. This paper describes preliminary results that demonstrate that wave measurement can be successfully obtained from suitably processed OSCR data. Comparisons with data from a WAVEC directional buoy are presented and show encouraging agreement. Some of the limitations to the measurement process are discussed and indicate a maximum range of about 20 km. Surface current variability on short time scales presents the most serious obstacle to wave measurement. This appears to be more of a problem when the mean currents are large, in that in these circumstances the data fail initial quality control criteria. However, in lower mean currents, the effect is often still present and leads to errors in long wave measurement     

Application of an improved self-starter to geoacoustic inversion

The self-starter is improved using the operator of the split-step Pade solution. In addition to providing greater stability and being applicable closer to the source, the improved self-starter is an efficient forward model for geoacoustic inversion. It is necessary to solve only O(10) tridiagonal systems of equations to obtain the acoustic field on a vertical array located O(10) wavelengths from a source. This experimental configuration is effective for geoacoustic inverse problems involving unknown parameters deep in the ocean bottom. For problems involving depth-dependent acoustic parameters, the improved self-starter can be used to solve nonlinear inverse problems involving O(10) unknown sediment parameters in less than a minute on the current generation of workstations     

The variability of Mercury's exosphere by particle and radiation induced surface release processes

Mercury's close orbit around the Sun, its weak intrinsic magnetic field and the absence of an atmosphere (P_surface<1×10⁻⁸ Pa) results in a strong direct exposure of the surface to energetic ions, electrons and UV radiation. Thermal processes and particle-surface-collisions dominate the surface interaction processes leading to surface chemistry and physics, including the formation of an exosphere (N?10¹⁴ cm⁻²) in which gravity is the dominant force affecting the trajectories of exospheric atoms. NASA's Mariner 10 spacecraft observed the existence of H, He, and O in Mercury's exosphere. In addition, the volatile components Na, K, and Ca have been observed by ground based instrumentation in the exosphere. We study the efficiency of several particle surface release processes by calculating stopping cross-sections, sputter yields and exospheric source rates. Our study indicates surface sputter yields for Na between values of about 0.27 and 0.35 in an energy range from 500 eV up to 2 keV if Na⁺ ions are the sputter agents, and about 0.037 and 0.082 at an energy range between 500 eV up to 2 keV when H⁺ are the sputter agents and a surface binding energy of about 2 eV to 2.65 eV. The sputter yields for Ca are about 0.032 to 0.06 and for K atoms between 0.054 to 0.1 in the same energy range. We found a sputter yield for O atoms between 0.025 and 0.04 for a particle energy range between 500 eV up to 2 keV protons. By taking the average solar wind proton surface flux at the open magnetic field line area of about 4×10⁸ cm⁻² s⁻¹ calculated by Massetti et al. (2003, Icarus, in press) the resulting average sputtering flux for O is about 0.8-1.0×10⁷ cm⁻² s⁻¹ and for Na approximately 1.3-1.6×10⁵ cm⁻² s⁻¹ depending on the assumed Na binding energies, regolith content, sputtering agents and solar activity. By using lunar regolith values for K we obtain a sputtering flux of about 1.0-1.4×10⁴ cm⁻² s⁻¹. By taking an average open magnetic field line area of about 2.8×10¹⁶ cm² modelled by Massetti et al. (2003, Icarus, in press) we derive an average surface sputter rate for Na of about 4.2×10²¹ s⁻¹ and for O of about 2.5×10²³ s⁻¹. The particle sputter rate for K atoms is about 3.0×10²⁰ s⁻¹ assuming lunar regolith composition for K. The sputter rates depend on the particle content in the regolith and the open magnetic field line area on Mercury's surface. Further, the surface layer could be depleted in alkali. A UV model has been developed to yield the surface UV irradiance at any time and latitude over a Mercury year. Seasonal and diurnal variations are calculated, and Photon Stimulated Desorption (PSD) fluxes along Mercury's orbit are evaluated. A solar UV hotspot is created towards perihelion, with significant average PSD particle release rates and Na fluxes of about 3.0×10⁶ cm⁻² s⁻¹. The average source rates for Na particles released by PSD are about 1×10²⁴ s⁻¹. By using the laboratory obtained data of Madey et al. (1998, J. Geophys. Res. 103, 5873-5887) for the calculation of the PSD flux of K atoms we get fluxes in the order of about 10⁴ cm⁻² s⁻¹ along Mercury's orbit. However, these values may be to high since they are based on idealized smooth surface conditions in the laboratory and do not include the roughness and porosity of Mercury's regolith. Further, the lack of an ionosphere and Mercury's small, temporally and spatially highly variable magnetosphere can result in a large and rapid increase of exospheric particles, especially Na in Mercury's exosphere. Our study suggests that the average total source rates for the exosphere from solar particle and radiation induced surface processes during quiet solar conditions may be of the same order as particles produced by micrometeoroid vaporization. We also discuss the capability of in situ measurements of Mercury's highly variable particle environment by the proposed NPA-SERENA instrument package on board ESA's BepiColombo Mercury Planetary Orbiter (MPO).     

Proton Irradiation of Centaur,Kuiper Belt,and Oort Cloud Objects at Plasma to Cosmic Ray Energy

Times for accumulation of chemically significant dosages on icy surfaces of Centaur, Kuiper Belt, and Oort Cloud objects from plasma and energetic ions depend on irradiation position within or outside the heliosphere. Principal irradiation components include solar wind plasma ions, pickup ions from solar UV ionization of interstellar neutral gas, energetic ions accelerated by solar and interplanetary shocks, including the putative solar wind termination shock, and galactic cosmic ray ions from the Local Interstellar Medium (LISM). We present model flux spectra derived from spacecraft data and models for eV to GeV protons at 40 AU, a termination shock position at 85 AU, and in the LISM. Times in years to accumulate dosages ～100 eV per molecule are computed from the spectra as functions of sensible surface depth less than one centimeter at unit density.The collisional resurfacing model of Luu and Jewitt is reconsidered in thecontext of depth-dependent dosage rates from plasma, suprathermal,and higher energy protons, and global exposure, by micrometeoroiddust grain impacts, of moderately irradiated red material below athin crust of heavily irradiated neutral material. This material should be more visible on dynamically `cold’ objects in the ～40 AU region.     

The Kaidun meteorite: Clasts of alkaline‐rich fractionated materials

Abstract— Clasts of alkaline (the second find in meteorites) and subalkaline rocks were found in the Kaidun meteorite. One of them (#d4A) is a large crystal of albite with inclusions of fluorapatite, arfvedsonite, aenigmatite, and wilkinsonite. The two latter minerals were previously unknown in meteorites. Another clast (#d[3–5]D) has a melt crystallization texture of mainly feldspar (oligoclase) composition and contains relict grains of both high‐Ca and low‐Ca pyroxene and fluorapatite. The mineralogical characteristics of these clasts suggest a genetic relationship and an origin from the same parent body. The textural and mineralogical characteristics of the clasts indicate origin by extensive igneous differentiation. Such processes most likely took place in a rather large differentiated body. The material of clast #d(3–5)D is similar in some mineralogical respects to basaltic shergottites.     

A search for the optical and near-infrared counterpart of the accreting millisecond X-ray pulsar XTE J1751−305

We have obtained optical and near-infrared images of the field of the accreting millisecond X-ray pulsar XTE J1751−305. There are no stars in the 0.7-arcsec error circle (0.7 arcsec is the overall uncertainty arising from tying the optical and X-ray images and from the intrinsic uncertainty in the Chandra X-ray astrometric solution). We derive limiting magnitudes for the counterpart of   R > 23.1, I > 21.6, Z > 20.6, J > 19.6  and   K > 19.2  . We compare these upper limits with the magnitudes one would expect for simple models for the possible donor stars and the accretion disc subject to the reddening observed in X-rays for XTE J1751−305 and when put at the distance of the Galactic Centre (8.5 kpc). We conclude that our non-detection does not constrain any of the models for the accretion disc or possible donor stars. Deep, near-infrared images obtained during quiescence will, however, constrain possible models for the donor stars in this ultracompact system.     

Giant Meterwave Radio Telescope observations of an M2.8 flare: Insights into the initiation of a flare–coronal mass ejection event

We present the first observations of a solar flare with the GMRT. An M2.8 flare observed at 1060 MHz with the GMRT on 17 November 2001 was associated with a prominence eruption observed at 17 GHz by the Nobeyama radioheliograph and the initiation of a fast partial halo CME observed with the LASCO C2 coronagraph. Towards the start of the eruption, we find evidence for reconnection above the prominence. Subsequently, we find evidence for rapid growth of a vertical current sheet below the erupting arcade, which is accompanied by the flare and prominence eruption.