Planetary boundary layer and surface layer sensitivity to land surface parameters

The sensitivity of the development of the convective planetary boundary layer (PBL) and the surface layer are examined using a coupled surface parameterization and detailed PBL model. First, the coupling is verified against observations from the First ISLSCP (International Satellite Land Surface Climatology Project) Field Experiment (FIFE). Results of the sensitivity experiments indicate that the PBL is most sensitive to the amount of soil water content, and the proximity of the soil water content to critical soil texture values (field capacity and wilting point). While vegetation cover is not the most sensitive parameter at the surface, its influence on the surface energy and hydrologic balance is crucial. Model sensitivity to minimum stomatal resistance, type of soil parameterization and canopy height (surface roughness and displacement depth) is also discussed.     

Commentary and critique of “accounting for mineral resources: Issues and BEA's initial estimates”

The Bureau of Economic Analysis (BEA), U.S. Department of Commerce, in keeping with broad international efforts to green national gross domestic product (GDP) accounts, has attempted to create satellite accounts for mineral depletion. The present paper criticizes the BEA's unit rent measure of resource depletion, which is based upon Hotelling's pure theory of exhaustion. Following a thorough criticism of Hotelling's theory as a real-world model of mineral prices, practical issues related to the treatment of recycling, exploration, definition of reserves/resources, and their valuation/exploitation are introduced. For crude oil and natural gas and the nonfuel minerals, specific application problems of joint products and residuals complicate BEA's assumptions and efforts.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Cordierite-garnet-sillimanite-quartz equilibrium: I. New experimental calibration in the system FeO−Al2O3−SiO2−H2O and certain P-T-X H2O relations

The equilibrium in which hydrous Fe-cordierite breaks down to almandine, sillimanite, quartz, and water was previously experimentally determined by Richardson (1968) and Holdaway and Lee (1977) using QMF buffer and by Weisbrod (1973) using QIF buffer. All these studies yielded similar results — a negative dP/dT slope for the equilibrium curve. However, based on theoretical arguments, Martignole and Sisi (1981), and based on Fe-Mg partitioning experiments on coexisting cordierite and garnet in equilibrium with sillimanite and quartz, Aranovich and Podlesskii (1983) suggested that this equilibrium curve has a positive dP/dT slope and its position depends on the water content of the equilibrium cordierite. We have redetermined this equilibrium using a much improved tecnique of detecting reaction direction, and cordierite starting material that contained virtually no hercynite. Hercynite was present as a contaminant in the cordierites of previous experimental studies and possibly reacted with quartz during the experimental runs to expand the apparent stability field of Fe-cordierite. We synthesized Fe-cordierite from reagent grade oxides at 710°C and 2 kbar (using QMF buffer) with two intermediate stages of grinding and mixing. The cordierite has a unit cell volume of 1574.60 ų (molar volume=23.706 J/bar) and no Fe³⁺ as indicated by X-ray diffraction and room temperature Mössbauer studies respectively. Reaction direction was concluded by noting20% change of the ratios of intensities of two key X-ray diffraction peaks of cordierite and almandine. Our results show that the four-phase equilibrium curve passes through the points 2.1 kbar, 650°C and 2.5 kbar, 750°C. This disagrees with all previous experimental studies. H₂O in the Fe-cordierite, equilibrated at 2.2 kbar and 700°C and determined by H-extraction line in the stable isotope laboratory, is 1.13 wt% (n=0.41 moles). H₂O content of pure Mg-cordierite equilibrated under identical conditions and determined by thermogravimentric conditions and determined by thermogravimetric analysis is 1.22 wt% (n=0.40). Similar determinations on Fe-cordierite and Mg-cordierite equilibrated at 2.0 kbar and 650°C show 1.27 wt% (n=0.46) and 1.47 wt% (n=0.48) of H₂O respectively. Thus, H₂O content appears to be independent of Fe/Mg ratio in cordierite, a conclusion which supports previous experimental determinations. The experimentally determined equilibrium curve represents conditions of P_H2O=P_total. From this we calculated the anhydrous curve representing equilibrium under conditions of X _H2O ^V =0.0. A family of calculated equilibrium curves of constant n _H2O ^Cord cut the experimentally determined curve at a very small angle indicating a slight variation in n _H2O ^Cord in cordierite in equilibrium with almandine, sillimanite, and quartz under the conditions of constant X _H2O ^V . Ancther set of calculated equilibrium curves, each representing constant a _H2O ^V demonstrate that the slopes of the curves vary with X _H2O ^V , and are all positive in the full range of 0.0X _H2O ^V 1.0.     

OZONE VALLEY OVER TIBETAN PLATEAU*

We analysed the atmospheric total column ozone temporal and spatial distributions,by using the USA Nimbus Satellite TOMS data provided by the Goddard Space Flight Center of NASA,USA.We ploted the monthly mean total column ozone distributions over China by the averaged data from 1979 to 1991,and found that the atmospheric total column ozone contours were parallel to latitudes in winter and spring. However, from June, the lower center of atmospheric column ozone, called "ozone valley",was formed gradually over the Tibetan Plateau, as shown in Fig.     

Phase differences between irradiance and velocity low degree solar acoustic modes revisited

Since 1984, simultaneous observations of irradiance and velocity solar acoustic modes, have been carried out by several authors in order to measure the phase difference between irradiance and velocity modes. Following the earliest observations with stratospheric balloon (Frolich and van Der Raay, 1984), a two ground-based stations (Tenerife and Baja California) were established (Jimenez et al, 1990) obtaining coherence results in the frequency range from 2.5 mHz to 4.3 mHz. These phase differences between irradiance and velocity solar acoustic modes are interpreted in terms of the non-adiabatic behaviour of the solar atmosphere. In 1988 the IPHIR (Frolich et al, 1988) instrument flown on the PHOBOS-2 mission to Mars and measured the solar irradiance during 150 consecutive days. The best velocity observations obtained in Tenerife for this period were compared with IPHIR data to compute the phase differences (Schrijver et al, 1991). The final conclusion is that good agreement is attained between space quadsi-space and ground observations which yield a phase diffenrece of about -125 degrees in the frequency range 2.5 mHz to 4.2 mHz, with a slight increase suggested by the data running up to 4.6 mHz.     

ANALYSIS OF A CASE OF EAST ASIA COASTAL CYCLOGENESIS*

The evolution of an explosive cyclone off the East Asia coast in March 1979 is described.A shortwave trough in the southern branch of upper-level westerlies initiated the incipient cyclone.Later,a polar trough in the north amplified and became in phase with the southern shortwave to form a major trough.This major trough was responsible for the rapid intensification of the surface cyclone.In the early development stage,warm and moist air was transported northward to the developing area by a strong low-level jet.The ageostrophic wind associated with the low-level jet contributed to the frontogenesis,creating a favorable low-level environment for the rapid deepening.A low-level positive potential vorticity anomaly was created prior to the onset of rapid deepening.It was a result of frontal cloud condensation.The cyclone intensified rapidly when stratospheric air with high potential vorticity penetrated to the mid-troposphere.The rapid deepening took place at a location under the left-exit region of an amplifying jet streak behind the major trough and the right-entrance region of another anticyclonically-curved subtropical jet streak in a quasi-stationary ridge overJapan.Due to the blocking effect of the Tibetan Plateau,two shortwave disturbances were observed in the upper-level westerlies on the north and south sides of the Plateau.The southern disturbance initiated the incipient surface cyclone,while the amplifying northern disturbance was responsible for the rapid deepening.Thus,the evolution of the explosive cyclone in this case can be regarded as consecutive Petterssen's "type-B" cyclogenesis in two separate stages.     

Sediment budget-based estimates of trace metal inputs to a Chesapeake estuary

This article evaluates whether a sediment budget for the South River, Maryland, can be coupled with metals data from sediment cores to identify and quantify sources of historic metal inputs to marsh and subtidal sediments along the estuary. Metal inputs to estuarine marsh sediments come from fluvial runoff and atmospheric deposition. Metal inputs to subtidal sediments come from atmospheric deposition, fluvial runoff, coastal erosion, and estuarine waters. The metals budget for the estuary indicates that metal inputs from coastal erosion have remained relatively constant since 1840. Historical variations in metal contents of marsh sediments have probably resulted primarily from increasing atmospheric deposition in this century, but prior to 1900 may reflect changing fluvial sources, atmospheric inputs, or factors not quantified by the budget. Residual Pb, Cu, and Zn in the marsh sediments not accounted for by fluvial inputs was low to moderate in 1840, decreased to near zero circa 1910, and by 1987 had increased to levels that were one to ten times greater than those of 1840. Sources of variability in subtidal cores could not be clearly discerned because of geochemical fluxes, turbulent mixing, and bioturbation within the cores. The sediment-metal budgeting approach appears to be a viable method for delineating metal sources in small, relatively simple estuarine systems like the South River and in systems where recent deposition (for example, prograding marshes) prevents use of deep core analysis to identify background levels of metal. In larger systems or systems with more variable sources of sediment and metal input, however, assumptions and measurement errors in the metal budgeting approach suggest that deep core analysis and normalization techniques are probably preferable for identifying anthropogenic impacts.Field and laboratory research conducted at the Department of Geography, University of Maryland, College Park, Maryland, 20742, USAField and laboratory research conducted at the Marine and Estuarine Environmental Science Program, University of Maryland, College Park, Maryland, 20742, USA     

Die Rheingrabenrandverwerfung im Wattkopftunnel bei Ettlingen (Nordschwarzwald)

The Wattkopftunnel, near Ettlingen (Nordschwarzwald), drives through the eastern margin of the Rheingraben. The tunnel passes cenozoic and mesozoic sediments. Early quarternary and tertiary beds are situated west of the main thrust of the Rheingraben. Fossil record indicates upper Oligocene age (Chatt) for parts of the tertiary sediments. At the eastern border of the Rheingraben, wedges of jurassic and middle triassic series are squeezed. East of the Rheingraben the tunnel drives in the lower triassic Bausandstein. The eastern margin of the Rheingraben was investigated in detail during tunneling. Faults of the Rheingraben margin are distributed in an 130 meter wide fault zone in the tunnel. Total stratigraphic separation by the normal faults reaches more than 2 000 meters. The cenozoic sequence suffered synsedimentary to early diagenetic deformation, while the mesozoic series are characterized by ruptural deformation. The fault- and joint system is directed in the rheinische Richtung (SSW-NNE). East of the Rheingraben a second direction occur, running parallel to the lower Albtal (W-E).