Extraction and recovery of precious metals from electronic waste printed circuit boards by bioleaching acidophilic fungi

Printed circuit boards contain precious metals. They are produced in large volumes, rendering them an important component of the electronic waste. In view of the heterogeneity of the metals present, reprocessing of electronic waste is a heinous task. The present study focused on leaching of valuable metals from electronic waste printed circuit boards using Aspergillus niger DDNS1. The adaptation phases began at 0.1, 0.5 and 1.0% of fine powder of printed circuit boards with 10% inoculum and were optimized with three effective factors, viz. initial pH, particle size and pulp density, to achieve the maximum simultaneous recovery of the valuable metals. The interactions of these metals were also deciphered using scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectrum and atomic absorption spectroscopy. The results indicated that extraction of the precious metals was accomplished mainly through the unique organic acids originating from A. niger DDNS1. The initial pH played an important role in the extraction of the precious metals and the metals precipitate formation. The leaching rate of the metals was generally higher at low powder dosage of printed circuit boards. The toxicity of the printed circuit boards had little effect on two-step bioleaching at the pulp density of 0.1% compared to one-step bioleaching. The two-step bioleaching process was followed under organic acid-forming conditions for the maximum mobilization of metals. Thus, the precious metals from printed circuit boards could be mobilized through fungal bioleaching which promises an important industrial application in recycling of electronic wastes.     

Improved Petrological Modal Analyses from X-ray Powder Diffraction Data by use of the Rietveld Method I. Selected Igneous, Volcanic, and Metamorphic Rocks

Mineral modes have been determined for specimens of eight rocktypes from CuK X-ray powder diffraction data using the Rietveldmethod. The samples include two granites, a granodiorite, adamellite,gabbro, basalt, trachyte, and two granulite-facies metamorphicrocks. Up to eight individual mineral components have been measuredin each sample (no glassy phases were observed), with a detectionlimit of {small tilde}1 wt.%, depending on the mineral assemblage.Marked variations in grain size (i.e., granite vs. trachyte)provide no difficulties for the X-ray method. The X-ray resultscompare very favourably with (1) optical modes determined forthe medium–coarse-grained samples by point counting, (2)normative calculations obtained using locally enhanced catanormand mesonorm software, and (3) corresponding Rietveld modesdetermined, for two samples, from neutron powder data. Wheredifferences occur, these are discussed in relation to the limitationsof each of the methods. The improved accuracy of the X-ray method is due primarily tothe incorporation of the full diffraction profile in the Rietveldanalysis calculations, and the elimination of preferred orientationby collecting the data from samples packed in glass capillaries(i.e., Debye–Scherrer mode). The good agreement of theX-ray and neutron modes shows that the usual problems encounteredwith microabsorption, extinction, and sampling are of littleconcern in these rocks. The results highlight one of the majoradvantages provided by Rietveld modal analysis over the moretraditional ‘reference intensity’ X-ray methods,namely, that the crystal chemistry (and thus the calibrationconstants) of the individual phases can be adjusted dynamicallyduring each individual analysis. This not only provides moreaccurate phase abundances, but also gives important supplementaryinformation about the mineralogy of the major components.     

Prediction of influence of global warming on biological cycle and carbon balance in forest ecosystems of the Volga River Basin

The gradient (ordination) analysis was used to find the tendencies and the rate of changes in discrete parameters of the cycle of forest phytomasses accompanying a growing thermoarid climatic trend. The prognostic estimates of biotic regulation of the carbon cycle by forest biogeocenoses according to the HadCM3 (version A2) climatic scenarios, describing the most powerful coming global warming, are presented.     

Diurnal variation of deep cloud systems over the Indian region using INSAT-1B pixel data

Summary Among the various time scales of deep clouds, diurnal variation is found to be prominent over the tropics. The present study examines the diurnal variation in the number and area cover associated with the cloud systems over the tropical Indian region using INSAT-1B pixel data. Three periods, namely, April–May 1988, July–August 1988, and January–February 1989 are considered. The dependence of diurnal characteristics on the temperature threshold, life duration and size of cloud systems, and land-sea contrast has been explored. The diurnal characteristics of cloud systems living for more than a day have been studied for the first time. It is shown that cloud systems exhibit strong diurnal dependence at the coldest temperature threshold used (201 K). Also, the diurnal variation is more for larger cloud systems and for longer living systems. In general, more deep cloud activity is found from the satellite data during the pre-dawn and early morning hours. Precipitation is enhanced during morning to early noon hours. Further, using data from a recent field experiment, clear evidence of diurnal variation in precipitation over the Bay of Bengal is also presented. Received March 20, 2000/Revised October 3, 2000     

Polarized Radiation in Relativistic Cosmology

A method to solve the general-relativistic equation of radiative transfer for polarized light incorporating elastic COMPTON scattering is discussed. The method is based on an expansion in spin-o and spin-2 spherical harmonics.     

Evolutionary approach to the missing mass problem of clusters of galaxies

In a gravitationally bound and stable cluster of galaxies the amount and distribution of matter determine both the velocity dispersion of the members and the type of evolution of the system. The use of the first of these physical connections — the application of virial theorem — led to the idea of missing mass in clusters, that of the second one seems to support this idea by an independent “rediscovery” and “redistribution” of missing mass. On the basis of this “evolutionary approach” to the missing mass problem — that is free from the uncertainties of measuring and interpreting red shifts — evidences are obtained for the existence of large amounts of discretely distributed dark circumgalactic or intragalactic matter in rich clusters of galaxies.     

Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.     

The periastron advance in the second post-Newtonian approximation in general relativity

In this paper we present a second order post-Newtonian approximation to the Hamiltonian of theN-body system. Subsequently we improve the well-known Robertson's formula for the perihelion advancement by a correction term of orderc, wherec ^–4 is the velocity of light.     

Anomalous luminescence of subglacial sediment at Haut Glacier d'Arolla,Switzerland – a consequence of resetting at the glacier bed?

Swift, D. A., Sanderson, D. C. W., Nienow, P. W., Bingham, R. G. & Cochrane, I. C. 2010: Anomalous luminescence of subglacial sediment at Haut Glacier d'Arolla, Switzerland – a consequence of resetting at the glacier bed? Boreas, Vol. 40, pp. 446–458. 10.1111/j.1502‐3885.2010.00196.x. ISSN 0300‐9483. Luminescence has the potential to elucidate glacial geomorphic processes because primary glacial sediment sources and transport pathways are associated with contrasting degrees of exposure to light. Most notably, sediment entrained from extraglacial sources should be at least partially reset, whereas sediment produced by glacial erosion of subglacial bedrock should retain substantial luminescence commensurate with a geological irradiation history. We set out to test the validity of this assumption at Haut Glacier d'Arolla, Switzerland using sediment sampled extraglacially and from the glacier bed. Contrary to our expectations, the subglacial samples exhibited natural signals that were substantially lower than those of other sample groups, and further (albeit limited) analyses have indicated no obvious differences in sample‐group luminescence characteristics or behaviour that could account for this observation. For glaciological reasons, we can eliminate the possibilities that the subglacial sediment has been extraglacially reset or exposed in situ to heat or light. We therefore advocate investigation of possible resetting processes related to subglacial crushing and grinding, and speculate that such processes, if more generally present, may enable the dating of subglacially deposited tills using luminescence‐based techniques.