Channel adjustments of the lower Trinity River,Texas, downstream of Livingston Dam

Channel cross‐sectional changes since construction of Livingston Dam and Lake Livingston in 1968 were studied in the lower Trinity River, Texas, to test theoretical models of channel adjustment, and to determine controls on the spatial extent of channel response. High and average flows were not significantly modified by the dam, but sediment transport is greatly reduced. The study is treated as an opportunistic experiment to examine the effects of a reduction in sediment supply when discharge regime is unchanged. Channel scour is evident for about 60 km downstream, and the general phenomena of incision, widening, coarsening of channel sediment and a decrease in channel slope are successfully predicted, in a qualitative sense, by standard models of channel response. However, there is no consistent channel response within this reach, as various qualitatively different combinations of increases, decreases or no change in width, depth, slope and roughness occur. These multiple modes of adjustment are predicted by the unstable hydraulic geometry model. Between about 60 km and the Trinity delta 175 km downstream of the dam, no morphological response to the dam is observed. Rather than a diminution of the dam's effects on fluvial processes, this is due to a fundamental change in controls of the fluvial system. The downstream end of the scour zone corresponds to the upstream extent of channel response to Holocene sea level rise. Beyond 60 km downstream, the Trinity River is characterized by extensive sediment storage and reduced conveyance capacity, so that even after dam construction sediment supply still exceeds transport capacity. The channel bed of much of this reach is near or below sea level, so that sea level rise and backwater effects from the estuary are more important controls on the fluvial system than upstream inputs. Copyright © 2005 John Wiley & Sons, Ltd.     

Land tenure type as an underrated legal constraint on the conservation management of coastal dunes: examples from Ireland

Legal factors play an underrated but significant role as constraints on conservation management. In this paper, based on observations in both Northern Ireland and the Republic of Ireland, mode of land tenure is assessed to determine its influence on the conservation management of coastal dunes. The tenure types considered are: private ownership, corporate private ownership, tenancy, secured tenancy, leasing, common (joint) ownership, uncertain ownership, public ownership and its subset military ownership. It is suggested that multiple private ownership is least likely to favour effective conservation management. Public ownership by a statutory conservation authority and corporate private ownership by a conservation-orientated NGO are regarded as the optimum tenure types for conservation management of coastal dunes.     

Hydrography of the eastern Arabian Sea during summer monsoon 2002

Hydrographic observations in the eastern Arabian Sea (EAS) during summer monsoon 2002 (during the first phase of the Arabian Sea Monsoon Experiment (ARMEX)) include two approximately fortnight-long CTD time series. A barrier layer was observed occasionally during the two time series. These ephemeral barrier layers were caused byin situ rainfall, and by advection of low-salinity (high-salinity) waters at the surface (below the surface mixed layer). These barrier layers were advected away from the source region by the West India Coastal Current and had no discernible effect on the sea surface temperature. The three high-salinity water masses, the Arabian Sea High Salinity Water (ASHSW), Persian Gulf Water (PGW), and Red Sea Water (RSW), and the Arabian Sea Salinity Minimum also exhibited intermittency: they appeared and disappeared during the time series. The concentration of the ASHSW, PGW, and RSW decreased equatorward, and that of the RSW also decreased offshore. The observations suggest that the RSW is advected equatorward along the continental slope off the Indian west coast.     

Hydrogen isotopic composition of water from fossil micrometeorites in howardites

We have measured the hydrogen isotopic composition (D/H ratios) of the water from 13 carbonaceous chondritic microclasts (CCMs, size <1 mm) trapped in two howardites (Kapoeta and Yamato-793497) early in the evolution of Solar System. The division into tochilinite-rich; magnetite-rich, olivine-poor; magnetite-rich, olivine-rich CCM types is corroborated by the hydrogen isotopic compositions. Both mineralogy and hydrogen isotopic compositions demonstrate that tochilinite-rich CCMs represent CM2 chondritic matter. In contrast, there is no good match between the isotopic and mineralogical properties of the magnetite-rich CCMs and the known groups of carbonaceous chondrites, suggesting that magnetite-rich CCMs represent a new kind of chondritic matter, not yet sampled in meteorite collections. This demonstrates that the view of the asteroid belt revealed by the collection of meteorites is incomplete. The study of (micro)clasts offers a unique opportunity to better decipher the nature and relative abundance of asteroids.The average hydrogen isotopic composition of water belonging to CCMs, D/H = (152.0 ± 4.8) × 10⁻⁶ (1σ_m), is similar to that of Antarctic micrometeorites (AMMs), D/H = (161.2 ± 3.8) × 10⁻⁶ (1σ_m). The similarity, in terms of mineralogy and hydrogen isotopic composition, between CCMs and AMMs demonstrates that the composition of the micrometeorites has not been modified over the whole history of the Solar System. It indicates that the composition of the micrometeorite flux onto Earth has been, and is, dominated by a mixture of CM2-like; magnetite-rich, olivine-poor; magnetite-rich, olivine-rich carbonaceous chondritic matter exemplified by CCMs found in howardites. Because CCMs have not suffered atmospheric entry, they provide an abundant source of pristine micrometeorites.The average D/H ratio of the whole population of CCMs is identical within errors to that of the Earth (149 ± 3 × 10⁻⁶). The match between the CCMs D/H ratio and that of the Earth is especially remarkable because 1) three different populations of CCMs are needed to make the D/H ratio of the Earth; 2) there is no single carbonaceous chondrite group for which a similar match exists. This observation suggests that CCMs population might be representative of the late veneer agent(s) that delivered water to the Earth.     

Kimberlite petrogenesis: Insights from clinopyroxene-melt partitioning experiments at 6 GPa in the CaO-MgO-Al2O3-SiO2-CO2 system

In this experimental study, we examine the mineral-melt partitioning of major and trace elements between clinopyroxene and CO₂-rich kimberlitic melts at a pressure of 6 GPa and temperatures of 1410°C and 1430°C. The melts produced contain ∼ 28 wt% dissolved CO₂, and are saturated with olivine and clinopyroxene. To assess the effects of temperature, crystal and melt compositions on trace element partitioning, experiments were performed in the model CaO-MgO-Al₂O₃-SiO₂-CO₂ system. Our results reveal that all the elements studied, except Al, Mg, Si, and Ga, are incompatible in clinopyroxene. Partition coefficients show a considerable range in magnitude, from ∼ 10⁻³ for D_U and D_Ba to ∼ 2.5 for D_Si. The two experimental runs show similar overall partitioning patterns with the D values being lower at 1430°C. Rare earth elements display a wide range of partition coefficients, D_La (0.012-0.026) being approximately one order of magnitude lower than D_Lu (0.18-0.23). Partition coefficients for the 2+ and 3+ cations entering the M2-site exhibit a near-parabolic dependence on radius of the incorporated cations as predicted from the lattice strain model. This underlines the contribution made by the crystal structure toward controlling the distribution of trace elements. Using data obtained in this study combined with that in the published literature, we also discuss the effects that other important parameters, namely, melt composition, pressure, and temperature, could have on partitioning.Our partition coefficients have been used to model the generation of the Group I (GI) kimberlites from South Africa. The numerical modeling shows that kimberlitic melts can be produced by ∼0.5% melting of a MORB-type depleted source that has been enriched by small-degree melts originating from a similar depleted source. This result suggests that the source of GI kimberlites may be located at the lithosphere-asthenosphere transition. Percolation of small degree melts from the asthenosphere would essentially create a metasomatic horizon near the bottom of the non-convecting sublithospheric mantle. Accumulation of such small degree melts together with the presence of volatiles and conductive heating would trigger melting of the ambient mantle and subsequently lead to eruption of kimberlitic melts. Additionally, our model shows that the GI source can be generated by metasomatism of a 2 Ga old MORB source ca. 1 Ga ago. Assuming that MORB-type mantle is the most depleted source of magmas on earth, then this is the oldest age at which the GI source could have existed. However, this age most likely reflects the average age of a series of metasomatic events than that of a single event.     

The effects of solution chemistry on the sticking efficiencies of viable Enterococcus faecalis: An atomic force microscopy and modeling study

Atomic force microscopy (AFM) and Derjaguin-Landau-Verwey-Overbeek (DLVO) theory in combination with the interaction force boundary layer (IFBL) model have been used to empirically and theoretically calculate sticking efficiencies (α) of Enterococcus faecalis cells against a silica glass surface. Sticking efficiencies were calculated in solutions of varying pH and ionic strength and related to maximum distances of transport through a hypothetical soil block using colloid filtration theory.AFM measurements show that the repulsive and attractive forces between E. faecalis cells and a glass surface are a function of ionic strength but are less sensitive to changes in solution pH. Zeta (ζ)-potential measurements of the cells and glass surfaces correlate with these trends. Calculated DLVO energy profiles predict much greater sensitivity to changing solution chemistry. Sticking efficiencies derived from AFM measurements range from 9.6 × 10⁻¹⁷ to 1 in solutions of low ionic strength (IS) and from 2.6 × 10⁻³³ to 1 at higher IS. Corresponding α values determined from DLVO theory are essentially zero in all tested solutions.Sticking efficiencies calculated in this study are smaller than values determined from column and field studies in similar systems; however, α derived from AFM data and the IFBL model more closely represent field data than do values calculated from DLVO energy values. A comparison with different methods of calculating α suggests that reversible adhesion may be significant in column-scale transport studies.