Phosphorus Speciation in Stream Bed Sediments from an Agricultural Watershed: Solid-Phase Associations and Sorption Behavior

The sorption behavior and solid-phase associations of phosphorus (P) in fine-grained sediments (<63 μm) from two upstream tributaries and one downstream main stem site of the Spoon River in west-central Illinois were characterized to better understand phosphorus bioavailability in this agriculturally dominated watershed. The P sorption affinities, as indicated by linear distribution coefficients (K _d), of all sediments were 330–5,150 L/kg, and negatively correlated with equilibrium phosphorus concentration (EPC_o) values, which ranged between 0.2 and 2.2 μM. pH values measured at the conclusion of the sorption experiments varied only slightly (7.45–8.10) but were nonetheless strongly positively correlated to EPC_o values, and negatively correlated to K _d values, suggesting the importance of pH to the observed sorption behavior. K _d values were generally lower and EPC_o values higher at the main stem site than at the upstream tributary sites, suggesting dissolved reactive P (DRP) bioavailability (specifically orthophosphate) increased downstream. The solid phase associations of P were operationally assessed with the streamlined SEDEX (sedimentary extraction) procedure, and most sediment P (≥50%) was released during the step designed to determine iron oxide–associated P. On average, 70–90% of the total sediment P pool was potentially bioavailable, as estimated by the sum of the iron oxide-, authigenic carbonate-, and organic-associated P fractions. Considerable calcium was also extracted from some sediments during the step designed to specifically remove iron oxide–associated P. It is hypothesized that the severe drought conditions that persisted between April and October, 2005 allowed authigenic carbonates (perhaps partly amorphous) to accumulate, and that these carbonates dissolved during the iron oxide extraction step. The extensive benthic algal populations also present may have aided carbonate precipitation, which under more normal hydrologic conditions would be periodically flushed downstream and replaced by fresh sediment. This suggests antecedent hydrologic conditions played a dominant role in the P sorption and solid phase associations identified.     

The effect of cation ordering and temperature on the high-pressure behaviour of dolomite

Synchrotron single-crystal X-ray diffraction experiments at high-pressure and high-temperature conditions were performed up to 20 GPa and 573.0(2) K on a fully ordered stoichiometric dolomite and a partially disordered stoichiometric dolomite [order parameter, s = 0.26(6)]. The ordered dolomite was found to be stable up to approximately 14 GPa at ambient temperature and up to approximately 17 GPa at T = 573.0(2) K. The P–V data from the ambient temperature experiments were analysed by a second-order Birch–Murnaghan equation-of-state giving K ₀ = 92.7(9) GPa for the ordered dolomite and K ₀ = 92.5(8) GPa for the disordered dolomite. The high-temperature data, collected for the ordered sample, were fitted by a third-order Birch–Murnaghan equation-of-state resulting in K ₀ = 95(6) GPa and K′ = 2.6(7). In order to compare the three experiments results, a third-order Birch–Murnaghan equation-of-state was also calculated for the ambient temperature experiments giving K ₀ = 93(3) GPa, K′ = 3.9(6) for the ordered dolomite and K ₀ = 92(3) GPa, K′ = 4.0(4) for the disordered dolomite. The derived axial moduli show that dolomite compresses very anisotropically, being the c-axis approximately three times more compressible than the a-axis. The axial compressibility increases as T increases, and the a-axis is the most temperature-influenced axis. On the contrary, axial compressibility is not influenced by disordering. Structural refinements at different pressures show that Ca and Mg octahedra are almost equally compressible in the ordered dolomite with K(CaO₆) = 109(4) GPa and K(MgO₆) = 103(3) GPa. On the contrary, CaO₆ compressibility is reduced and MgO₆ compressibility is increased in the disordered crystal structure where K(CaO₆) = 139(4) GPa and K(MgO₆) = 89(4) GPa. Disordering is found to increase CaO₆ and to decrease MgO₆ bond strengths, thus making stiffer the Ca octahedron and softer the Mg octahedron. Cation polyhedra are distorted in both ordered and disordered dolomites and they increase in regularity as P increases. Ordered dolomite approaches regularity at approximately 14 GPa. The increase in regularity of octahedra in the disordered dolomite is strongly affected by the very slow regularization of MgO₆ with respect to CaO₆. The phase transition to the high-pressure polymorph of dolomite (dolomite-II), which is driven by a significant increase in the regularity of both cations polyhedra and mineral crystal structure, occurs in the ordered dolomite at ambient temperature at approximately 14 GPa; whereas no clear evidences of phase transition were observed as regards the disordered crystal structure.     

Optical and X-Ray Observations of the Symbiotic System Ag Draconis During Quiescence and Outburst

We review the main characteristics of the symbiotic system AG Draconis, with special emphasis on its optical and X-ray variations. We also discuss the X-ray to visual energy distribution during quiescence and outburst and describe our spectroscopic and X-ray observations during the 2003 outburst. Based on X-ray observations collected with the XMM–Newton Observatory, on INES data from the IUE satellite, and on optical spectra collected with the Asiago–Cima Ekar, Bologna–Loiano and La Palma–Galileo Italian telescopes.     

Hydrography of the eastern Arabian Sea during summer monsoon 2002

Hydrographic observations in the eastern Arabian Sea (EAS) during summer monsoon 2002 (during the first phase of the Arabian Sea Monsoon Experiment (ARMEX)) include two approximately fortnight-long CTD time series. A barrier layer was observed occasionally during the two time series. These ephemeral barrier layers were caused byin situ rainfall, and by advection of low-salinity (high-salinity) waters at the surface (below the surface mixed layer). These barrier layers were advected away from the source region by the West India Coastal Current and had no discernible effect on the sea surface temperature. The three high-salinity water masses, the Arabian Sea High Salinity Water (ASHSW), Persian Gulf Water (PGW), and Red Sea Water (RSW), and the Arabian Sea Salinity Minimum also exhibited intermittency: they appeared and disappeared during the time series. The concentration of the ASHSW, PGW, and RSW decreased equatorward, and that of the RSW also decreased offshore. The observations suggest that the RSW is advected equatorward along the continental slope off the Indian west coast.     

Mechanical shredding of water hyacinth (<Emphasis Type="Italic">Eichhornia crassipes</Emphasis>): Effects on water quality in the Sacramento-San Joaquin River Delta,California

Management actions to control invasive aquatic species can have significant ecosystem-scale effects. We evaluated the water chemistry and nutrient effects of mechanical shredding to control water hyacinth (Eichhornia crassipes) in an agricultural slough and a tidal wetland on the Sacramento-San Joaquin River Delta, California. Shredding was conducted with two types of shredder boats in fall of 2003 and another boat in spring of 2004. Shredding measurably affected water quality, but specific effects varied as a function of shredding site and season. Significant increases were observed for total Kjeldahl nitrogen and total phosphorus for all experiments. Dissolved oxygen effects varied by site, decreasing after shredding at the agricultural slough but increasing at the tidal wetland. The increase in dissolved oxygen likely resulted from tidal incursions from the adjacent river. A year-long time series of dissolved oxygen data indicated a negative relationship between hyacinth abundance and dissolved oxygen concentrations. Hyacinth contained similar tissue concentrations of mercury to underlying sediments, suggesting that plant harvesting could aid mercury remediation efforts. Simple mass calculations indicated that Delta-wide shredding operations could cause between 0.1% and 9.6% increases in the overall abundance of carbon, nitrogen, and phosphorus in the Delta water column. Results suggest that local effects of management actions to control invasive aquatic plants will vary widely as a function of site-specific hydrology, but that estuary-wide effects would be limited.     

Creating an isotopically similar Earth–Moon system with correct angular momentum from a giant impact

The giant impact hypothesis is the dominant theory explaining the formation of our Moon. However, the inability to produce an isotopically similar Earth–Moon system with correct angular momentum has cast a shadow on its validity. Computer-generated impacts have been successful in producing virtual systems that possess many of the observed physical properties. However, addressing the isotopic similarities between the Earth and Moon coupled with correct angular momentum has proven to be challenging. Equilibration and evection resonance have been proposed as means of reconciling the models. In the summer of 2013, the Royal Society called a meeting solely to discuss the formation of the Moon. In this meeting, evection resonance and equilibration were both questioned as viable means of removing the deficiencies from giant impact models. The main concerns were that models were multi-staged and too complex. We present here initial impact conditions that produce an isotopically similar Earth–Moon system with correct angular momentum. This is done in a single-staged simulation. The initial parameters are straightforward and the results evolve solely from the impact. This was accomplished by colliding two roughly half-Earth-sized impactors, rotating in approximately the same plane in a high-energy, off-centered impact, where both impactors spin into the collision.     

Analysing Debris-Flow Impact Models, Based on a Small Scale Modelling Approach

The objective of this study is to analyse adaptable debris-flow impact models, which are very important for mitigation measurements and buildings using their sphere of influence. For this reason, 16 debris-flow experiments, on a small-scale modelling approach, were performed. Impact forces were measured with a force plate panel, consisting of 24 aluminium devices, coaxially mounted with resistance strain gauges. Flow velocities, flow heights as well as horizontal impact forces were sampled with a frequency of 2.4 kHz. Sub datasets of sampled raw force data were defined by applying an average median filter, a low-pass filter routine. Further, estimated peak pressure values as well as empirical coefficients of hydraulic impact models were compared, and the influence of signal processing is discussed.