Comparative Analyses of the Point Cloud Produced by Using Close-Range Photogrammetry and Terrestrial Laser Scanning for Rock Surface

Point cloud produced by using theoretically and practically different techniques is one of the most preferred data types in various engineering applications and projects. The advanced methods to obtain point cloud data in terrestrial studies are close range photogrammetry (CRP) and terrestrial laser scanning (TLS). In the TLS technique, separated from the CRP in terms of system structure, denser point cloud at certain intervals can be produced. However, point clouds can be produced with the help of photographs taken at appropriate conditions depending on the hardware and software technologies. Adequate quality photographs can be obtained by consumer grade digital cameras, and photogrammetric software widely used nowadays provides the generation of point cloud support. The tendency and the desire for the TLS are higher since it constitutes a new area of research. Moreover, it is believed that TLS takes the place of CRP, reviewed as antiquated. In this study that is conducted on rock surfaces located at Istanbul Technical University Ayazaga Campus, whether point cloud produced by means photographs can be used instead of point cloud obtained by laser scanner device is investigated. Study is worked on covers approximately area of 30 m?×?10 m. In order to compare the methods, 2D and 3D analyses as well as accuracy assessment were conducted. 2D analysis is areal-based whereas 3D analysis is volume-based. Analyses results showed that point clouds in both cases are similar to each other and can be used for similar other studies. Also, because the factors affecting the accuracy of the basic data and derived product for both methods are quite variable, it was concluded that it is not appropriate to make a choice regardless of the object of interest and the working conditions.     

Science-based approach for credible accounting of mitigation in managed forests

Background

The credibility and effectiveness of country climate targets under the Paris Agreement requires that, in all greenhouse gas (GHG) sectors, the accounted mitigation outcomes reflect genuine deviations from the type and magnitude of activities generating emissions in the base year or baseline. This is challenging for the forestry sector, as the future net emissions can change irrespective of actual management activities, because of age-related stand dynamics resulting from past management and natural disturbances. The solution implemented under the Kyoto Protocol (2013–2020) was accounting mitigation as deviation from a projected (forward-looking) “forest reference level”, which considered the age-related dynamics but also allowed including the assumed future implementation of approved policies. This caused controversies, as unverifiable counterfactual scenarios with inflated future harvest could lead to credits where no change in management has actually occurred, or conversely, failing to reflect in the accounts a policy-driven increase in net emissions. Instead, here we describe an approach to set reference levels based on the projected continuation of documented historical forest management practice, i.e. reflecting age-related dynamics but not the future impact of policies. We illustrate a possible method to implement this approach at the level of the European Union (EU) using the Carbon Budget Model.

Results

Using EU country data, we show that forest sinks between 2013 and 2016 were greater than that assumed in the 2013–2020 EU reference level under the Kyoto Protocol, which would lead to credits of 110–120 Mt CO₂/year (capped at 70–80 Mt CO₂/year, equivalent to 1.3% of 1990 EU total emissions). By modelling the continuation of management practice documented historically (2000–2009), we show that these credits are mostly due to the inclusion in the reference levels of policy-assumed harvest increases that never materialized. With our proposed approach, harvest is expected to increase (12% in 2030 at EU-level, relative to 2000–2009), but more slowly than in current forest reference levels, and only because of age-related dynamics, i.e. increased growing stocks in maturing forests.

Conclusions

Our science-based approach, compatible with the EU post-2020 climate legislation, helps to ensure that only genuine deviations from the continuation of historically documented forest management practices are accounted toward climate targets, therefore enhancing the consistency and comparability across GHG sectors. It provides flexibility for countries to increase harvest in future reference levels when justified by age-related dynamics. It offers a policy-neutral solution to the polarized debate on forest accounting (especially on bioenergy) and supports the credibility of forest sector mitigation under the Paris Agreement.

     

Evaluation of gravitational curvatures of a tesseroid in spherical integral kernels

Proper understanding of how the Earth’s mass distributions and redistributions influence the Earth’s gravity field-related functionals is crucial for numerous applications in geodesy, geophysics and related geosciences. Calculations of the gravitational curvatures (GC) have been proposed in geodesy in recent years. In view of future satellite missions, the sixth-order developments of the gradients are becoming requisite. In this paper, a set of 3D integral GC formulas of a tesseroid mass body have been provided by spherical integral kernels in the spatial domain. Based on the Taylor series expansion approach, the numerical expressions of the 3D GC formulas are provided up to sixth order. Moreover, numerical experiments demonstrate the correctness of the 3D Taylor series approach for the GC formulas with order as high as sixth order. Analogous to other gravitational effects (e.g., gravitational potential, gravity vector, gravity gradient tensor), numerically it is found that there exist the very-near-area problem and polar singularity problem in the GC east–east–radial, north–north–radial and radial–radial–radial components in spatial domain, and compared to the other gravitational effects, the relative approximation errors of the GC components are larger due to not only the influence of the geocentric distance but also the influence of the latitude. This study shows that the magnitude of each term for the nonzero GC functionals by a grid resolution 15\(^{{\prime } }\,\times \) 15\(^{{\prime }}\) at GOCE satellite height can reach of about 10\(^{-16}\) m\(^{-1}\) s\(^{2}\) for zero order, 10\(^{-24 }\) or 10\(^{-23}\) m\(^{-1}\) s\(^{2}\) for second order, 10\(^{-29}\) m\(^{-1}\) s\(^{2}\) for fourth order and 10\(^{-35}\) or 10\(^{-34}\) m\(^{-1}\) s\(^{2}\) for sixth order, respectively.     

Determination of Phobos’ rotational parameters by an inertial frame bundle block adjustment

A functional model for a bundle block adjustment in the inertial reference frame was developed, implemented and tested. This approach enables the determination of rotation parameters of planetary bodies on the basis of photogrammetric observations. Tests with a self-consistent synthetic data set showed that the implementation converges reliably toward the expected values of the introduced unknown parameters of the adjustment, e.g., spin pole orientation, and that it can cope with typical observational errors in the data. We applied the model to a data set of Phobos using images from the Mars Express and the Viking mission. With Phobos being in a locked rotation, we computed a forced libration amplitude of \(1.14^\circ \pm 0.03^\circ \) together with a control point network of 685 points.     

Spatial process and data models: Toward integration of agent-based models and GIS

The use of object-orientation for both spatial data and spatial process models facilitates their integration, which can allow exploration and explanation of spatial-temporal phenomena. In order to better understand how tight coupling might proceed and to evaluate the possible functional and efficiency gains from such a tight coupling, we identify four key relationships affecting how geographic data (fields and objects) and agent-based process models can interact: identity, causal, temporal and topological. We discuss approaches to implementing tight integration, focusing on a middleware approach that links existing GIS and ABM development platforms, and illustrate the need and approaches with example agent-based models.     

An intelligent agent based on virtual geographic environment system

On the basis of previous work, this paper designs an intelligent agent based on virtual geographic environment (VGE) system that is characterized by huge data, rapid computation, multi-user, multi-thread and intelligence and issues challenges to traditional GIS models and algorithms. The new advances in software and hardware technology lay a reliable basis for system design, development and application.     

Implementation of OGC web map service based on web service

OGC Web Map Service is one kind of OGC Portrayal Services belongs to OGC Web Service model and it provides multi-platform interoperability of spatial data set. This paper presents a method for implementing OGC Web Map Service based on Web Service technique and introduces the detailed process.     

Virtual reality and its application to slide annimation of landslide

A few researches adopt virtual reality in landslide. So it is significant to combine the physicsbased deformable method with the process simulation of a sliding landslide, this way the dynamic process of a going landslide can be simulated. The analysis of the dynamic law of landslide provides a foundation to forecast and make it realiable to foretell disasters. After recounting the condition of VR and landsliding body simulation, this paper puts forward simulating landslide by the physics-based deformable method. The method divides landsliding into deformable body and rigid one. The deformation of deformable body can be compute by DDA and FEM, and DDA fits the great deformation and FEM is good for the tiny deformation. This paper shows it is feasible to simulate the landslide animation by this method.     

Authorization administration in a distributed multi-application environment

To meet the authorization administration requirements in a distributed computer network environment, this paper extends the role-based access control model with multiple application dimensions and establishes a new access control model ED-RBAC(Extended Role Based Access Control Model) for the distributed environment. We propose an extendable hierarchical authorization assignment framework and design effective role-registering, role-applying and role-assigning protocol with symmetric and asymmetric cryptographic systems. The model can be used to simplify authorization administration in a distributed environment with multiple applications.