长春市旅游产品开发研究

搞好长春市旅游产品的开发与设计对其旅游业的发展极为重要，长春市旅游资源类型多样，内容丰富，主要有生态旅游资源，电影文化旅游资源，产业旅游资源，殖民遗迹旅游资源，辽金文化旅游资源等五大资源优势。文章在分析这些资源优势的基础上，结合长春市国内外旅游客源市场的背景与现状，提出了旅游产品开发的具体思路，即在今后的开发中应突出地方特色。增强参与性，以七大旅游产品系列为依托，重点开发冰雪旅游，生态旅游，文化旅游和产业旅游。     

β-环糊精包合态三氟氯氰杀虫剂的制备

为了进一步提高三氟氯氰菊酯农药的防治效果。寻找适宜的农药新剂型，我们用液相法制备了三氟氯氰菊酯－β－环糊精包合物，并以水为基质进行了稳定性观察，同时又以差热分析法和气相色谱法确认了包合物的形成，以旋光度法证明两者间的包合比。结果表明，三氟氯氰菊酯与β-环糊精可形成1：1型包合物，该包合物稳定性高，具有一定的水溶性，而且在水中稳定，所以有望通过环糊 包合作用将三氟氯氰菊酯帛成水剂；当以气相法测试包合态三氟氯氰菊酯含量时，必须将其解络，使之成为游离状态，然后按常规方法进行含量测定。     

松辽盆地后五家户气田沉积相特征与控气作用

本文对松辽盆地东南部后五家户气田划分出22种沉积微相,建立7种相层序,分析了扇三角洲及三角洲沉积环境对天然气成藏的控制作用。指出了扇三角洲前缘砂体和三角洲前缘砂体较为发育,沉积物源来自气田东北部和东南部两个方向。后五家户气田多为构造—岩性气藏和岩性气藏。     

Discussion on the feature of strong earthquake: Orderly distribution in time, space and intensity before the Western Kunlun Mountain Pass M=8.1 earthquake

Introduction The Western Kunlun Mountain Pass M=8.1 earthquake occurred on November 14, 2001 is the other M=8 earthquake occurred 50 years after Dangxiong, Tibet M=8.0 earthquake in Chinese mainland. The earthquake has caused the attention of the seismologists in the following aspects: 1) The fracture length is more than 400 km, which is far away from the estimated length by the statistic empirical function between the magnitude and the fracture length (WANG, et al, 2002); 2) The aftersh…     

Magnetic properties of a freshly fallen LL ordinary chondrite: the Bensour meteorite

A comprehensive rock magnetic, magnetic anisotropy and paleomagnetic study has been undertaken in the brecciated LL6 Bensour ordinary chondrite, a few months only after its fall on Earth. Microscopic observations and electronic microprobe analyses indicate the presence of Ni-rich taenite, tetrataenite and rare Co-rich kamacite. Tetrataenite is the main carrier of remanence. Magnetization and anisotropy measurements were performed on mutually oriented 125 mm³ sub-samples. A very strong coherent susceptibility and remanence anisotropy is evidenced and interpreted as due to the large impact responsible for the post-metamorphic compaction of this brecciated material and disruption of the parent body. We show that the acquisition of remanent magnetization postdates metamorphism on the parent body and predates the entering of the meteorite in Earth’s atmosphere. Three components of magnetization could be isolated. A soft coherent component is closely related to the anisotropy of the meteorite and is interpreted as a shock remanent magnetization acquired during the same large impact on the parent body. Two harder components show random directions at a few mm scale. This randomness is attributed either to the formation mechanism of tetrataenite or to post-metamorphic brecciation. All components are likely acquired in very low (≈μT) to null ambient magnetic field, as demonstrated by comparison with demagnetization behavior of isothermal remanent magnetization. Two other LL6 meteorites, Kilabo and St-Mesmin, have also been studied for comparison with Bensour.     

盆地岩石圈结构与油气成藏及分布

本文综述了大陆岩石圈研究现状和克拉通盆地、裂谷盆地和前陆盆地的岩石圈结构特征,指出在古裂谷、褶皱带或区域性深断裂等陆壳构造薄弱带上发育起来的多期叠合盆地,具有很好的含油气前景。大型含油气盆地往往存在地幔上隆、地壳减薄和地壳内低速层,盆地基底沉降与盖层沉积厚度较大。适度的后期构造活动改造和岩浆活动有利于沉积盆地内油气生成与保存。     

Evidence for fullerenes in solid bitumen from pillow lavas of Proterozoic age from Mítov (Bohemian Massif, Czech Republic)

Andesitic pillow lavas containing biogenic, solid bitumen (SB) are a constituent of a Neoproterozoic volcanosedimentary sequence (Teplá-Barrandian unit, Bohemian Massif) in the Mítov area of the Czech Republic. A black shale formation that is crosscut by these andesitic basalts is 565 Ma old. Carbon disulfide extracts of two powdered samples of SB contain 0.2 and 0.3 ppm of C₆₀, respectively, as determined by high-pressure liquid chromatography. The peak assignment based on retention time is fully supported by high-resolution electron ionization mass spectrometry (EI-MS). No C₇₀ was detected, nor was C₆₀ found in two other SB samples from this locality. Other investigated carbonaceous samples from Bohemia (coals and anthracites of Upper Paleozoic age and anthraxolite, graphitoids, and graphite of Upper Proterozoic age) did not contain fullerenes at concentrations above the detection limit of 0.01 ppm. The absence of C₆₀ in these samples was confirmed by EI-MS. The proposed mechanism of fullerene formation involves a primary algal phase, generation of a hydrocarbonaceous mixture in the course of thermal evolution of the sedimentary series, and their high-temperature transformation related to the extrusion of basalt. An important feature for fullerene conservation was the enclosure of fullerenes in SB with a structure similar to glasslike carbon, where the fullerene was protected against oxidation.     

Petrogenesis of lavas from the AMAR Valley and Narrowgate region of the FAMOUS Valley, 36°–37°N on the Mid-Atlantic Ridge

Basaltic lavas from the AMAR Valley and the Narrowgate region of the FAMOUS Valley on the Mid-Atlantic Ridge (36° to 37°?N) range in texture from aphyric to highly plagioclase phyric (>25% large plagioclase phenocrysts). Based on ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd ratios, most of these lavas can be subdivided into two distinct, isotopically homogeneous, groups: Group I has lower ⁸⁷Sr/⁸⁶Sr (0.70288±1) and higher ¹⁴³Nd/¹⁴⁴Nd (0.51312±1) ratios; Group II has higher ⁸⁷Sr/⁸⁶Sr (0.70296±1) and lower ¹⁴³Nd/¹⁴⁴Nd (0.51309±2) ratios. Most Group II lavas are aphyric, whereas Group I lavas are primarily plagioclase phyric. Lavas from both groups show a wide range in incompatible element abundance ratios (e.g., Zr/Nb =6–29; (La/Sm)_n=0.6–1.7). Aphyric lavas have relatively constant Sc (40±1.5?ppm) abundances and CaO/Al₂O₃ ratios (0.80±0.02). Group I lavas are confined primarily to the AMAR rift valley floor whereas Group II lavas are found along the east and west marginal highs. We interpret the isotopic differences between the two groups as reflecting a temporal change in the upwelling mantle beneath this region of the Mid-Atlantic Ridge which is south of the Azore Islands. For each group, a petrogenetic model consistent with the geochemical data is multi-stage decompression melting of an initially enriched, homogeneous, mantle source region. If the early derived, incompatible-element enriched, melt increments are not always pooled with subsequent increments, the erupted magma batches may have the major element characteristics of melts derived by 10 to 20% melting, but with incompatible element abundance ratios reflecting the change from an enriched to depleted source during the incremental melting process. In this process an initially homogeneous source can generate primary magmas with the required range in incompatible element abundance ratios shown by each group. The nearly constant CaO/Al₂O₃ ratios and Sc contents of the aphyric lavas with decreasing Mg?? reflects subsequent polybaric fractionation of clinopyroxene, plagioclase and olivine over the pressure interval 8–6?kbar (24–18?km), followed by rapid transport to the surface and eruption. There is no geochemical evidence for a crustal magma chamber beneath this section of the Mid-Atlantic Ridge.     

Transport in a 2-D saturated porous medium: A new method for particle tracking

A new method for solving the transport equation based on the management of a large numbe of particles in a discretized 2-D domain is presented. The method uses numerical variables to represent the number of particles in a given mesh and is more complex than the 1-D problem. The first part of the paper focuses on the specific management of particles in a 2-D problem. The method also would be valid for three dimensions as long as the medium can be modeled similar to a layered system. As the particles are no longer tracked individually, the algorithm is fast and does not depend on the number of particles present. The numerical tests show that the method is nearly numerical dispersion free and permits accurate calculations even for simulations of low-concentration transport. Because each mesh is considered as a closed system between two successive time steps, it is easy to add adsorption phenomenon without any problem of numerical stability. The model is tested under conditions that are extremely demanding for its operating mode and gives a good fit to analytical solutions. The conditions in which it can be used to best advantage are discussed.