Effect of the Dry Ashing Method on Cadmium Isotope Measurements in Soil and Plant Samples

A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ^114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study.     

基于欧拉反褶积法的无人机航磁找矿应用

无人机航磁测量以其高效、安全、低成本等优点逐渐应用到中小面积大比例尺资源勘探领域。本文针对安徽芜湖市三山区22 km²区域构造刻画和找矿前景预测,开展1∶20 000高精度无人机航磁测量工作;推导了欧拉反演求解过程,并分析对比构造指数选取,使用构造指数为0的欧拉反褶积对航磁数据进行反演求解,获得地下磁异常体构造边界解集信息;将其应用到研究区域航磁数据反演,根据反演得到的边界位置和深度信息圈定了18处断裂,并结合异常特征给出了8.7 km²岩浆岩分布区,根据宁芜区域铁矿成矿特点,圈定岩浆分布区及边界为成矿详查区。     

上扬子地区不同类型岩石生氦潜力评价及泥页岩氦气开采条件理论计算

上扬子地区是我国页岩气重要开采区,也是氦气工业性开采的唯一地区,但对于其氦气生成潜力研究仍处于空白阶段.据此,对上扬子东南地区采集的144件岩石样品进行场发射扫描电镜及铀、钍强度测试,理论计算了页岩气中氦气达到我国工业开采标准(0.05％)需要满足的理论条件.岩石扫描电镜结果表明,富含铀、钍的副矿物(锆石、独居石、铀钍石及磷灰石等)主要赋存于造岩矿物石英和长石中.岩石铀、钍强度测试结果表明,三大类岩石中铀平均含量呈现:沉积岩(8.96×10-6)＞岩浆岩(4.83×10-6)＞变质岩(1.89×10-6);钍平均含量呈现:沉积岩(11.01×10-6)≈变质岩(10.4×10-6)＞岩浆岩(5.9×10-6).岩浆岩中铀、钍平均含量呈现:酸性岩＞中性岩＞基性岩＞超基性岩;沉积岩中铀平均含量呈现泥页岩(13.86×10-6)＞＞砂岩(2.54×10-6)＞碳酸盐岩(1.67×10-6);钍平均含量呈现泥页岩(12.50×10-6)≈砂岩(12.76×10-6)＞碳酸盐岩(5.96×10-6).不同沉积时代沉积岩中铀、钍平均含量也呈现上述分布规律.沉积岩中铀、钍含量主要与岩石的沉积环境与物源有关,与沉积时代无关.单位时间、单位质量岩石氦气生成量的大小为:泥页岩＞酸性岩＞中性岩＞砂岩＞变质岩＞碳酸盐岩＞基性岩＞超基性岩.以中国南方地区上奥陶统五峰组—下志留统龙马溪组页岩为例,当该层位泥页岩中残余氦气含量为U,Th元素衰变释放出来氦气含量的80％以上时,适合进行"页岩气+氦气"的共同开采,提高页岩气的开采价值.     

一次极端寒潮天气过程等熵位涡分析

利用2016年1月1日至31日的FNL资料,对一次极端寒潮天气过程进行了等熵位涡分析。结果表明:高位涡主体由极涡分裂而来,前面低位涡区的阻挡与后侧低位涡大气的北上加强了位涡的经向交换,高位涡空气不断由极地向南输送,使得高位涡主体不断加强维持。高位涡在由北向南移动的同时,也由对流层顶向下输送。此次寒潮过程主要有3股冷空气由上而下发展,位置均在高空急流轴的北侧,最南端的一股下沉气流最旺盛,这是其与高空急流相互作用的结果。强盛的冷空气下沉使得寒潮影响范围触及我国华南地区。随着高位涡的向南向下传输,一方面引起对流层中高层低涡系统迅速发展,当它移到中国东部地区时,东亚大槽迅速加深,使槽后强冷空气迅速向南爆发;另一方面,在高位涡输送的过程中,其后侧有强烈的下沉运动,使得地面冷高压快速发展,导致强寒潮天气的爆发。     

陕西关中两次霾重污染过程气象条件分析

应用常规观测资料、污染物浓度资料和NCEP 1°×1°再分析资料从环流形势、边界层特征和扩散条件等方面对2013年和2016年两次持续性霾重污染过程进行对比分析。结果表明:①2013年过程和2016年过程在500hPa高空上分别为阻塞环流型和纬向环流型,关中地区受偏西气流影响、地面气压场较弱、大气层结均比较稳定;②2013年过程西安贴地逆温层顶高度低、相对湿度大、气温低、不利于大气垂直湍流交换,污染物容易堆积,这也是2013年过程比2016年过程重污染持续时间长、污染浓度高的原因之一;③两次过程西安平均风速均小于2m/s,具有显著的低风速特征,且东北风为其主导风向。持续东北风引起上游污染传输和低风速导致的本地污染累积是造成2013年过程污染浓度更高的重要因素;④2013年过程结束是受强冷空气影响,来自高空的干洁大气下沉到地面,置换了边界层的污染空气,使空气质量得到根本改善;而2016年过程是受高原槽东移影响,雨雪天气的沉降作用使得霾消散。     

新疆及中亚地区斜坡灾害研究现状与展望

新疆和中亚五国山河相连,都是"一带一路"建设的重要支点,但也是滑坡、泥石流等斜坡灾害的高发区,且两地的地质灾害发育有着明显的共性.本文对新疆和中亚地区的斜坡灾害研究现状进行综述,分析了两地斜坡灾害形成机理、发育规律,即中高山地分布集中,受降雨和冰雪融水影响很大,黄土滑坡发育.新疆的斜坡灾害研究多围绕公路、水利等工程设施...     

云南热区≥10℃和≥18℃年积温及日数的分布规律研究

云南热区以其独特的自然地理条件,在我国热区的研究与开发中占有极其重要的地位。利用云南实测地面气温资料等,采用线性回归及残差分析等分析方法,分析了云南热区森林生态系统≥10℃积温及其日数、≥18℃积温等热量指标在不同地区的空间分布规律及原因。结果表明,云南热区不同区域≥10℃积温及其日数、≥18℃积温等热量指标都有明显的空间差异。根据这些划分热量带的基本指标,以及热区分布县市的最低海拔和增温或降温的效应,对其热区分布的海拔上限进行了估测,为准确确定云南热区分布的空间格局及各县市热带和南亚热带的热区范围及热区的主要特性提供了依据。     

洛阳市城市环境气象监测预报服务研究

利用洛阳市环境监测资料和气象资料,分析了洛阳市污染物浓度的日变化、季节变化、年际变化规律,并分析了污染物浓度与气象因子的关系.在此基础上,通过回归分析预报方法、污染潜势预报方法、CAPPS模式预报方法对洛阳市3种主要污染物的浓度和级别进行了24 h和48 h预测,并建立了气象局与环保部门共享的气象和污染数据库平台,为双方今后的合作奠定了基础.     

广西佛子冲铅锌矿田地质特征及找矿模式

广西佛子冲铅锌矿位于桂东南博白-岑溪多金属成矿带北东端。矿床的形成是古生代地层的岩性差异、长期构造活动带以及燕山期多次侵入的壳慢混合型岩浆岩三方面联合效应的结果。作者通过对该矿床地质矿产特征、矿床温压地球化学的总结,建立了佛子冲铅锌矿田成矿模式;并依据前人工作的大量地质和测试资料,建立了该矿田的综合找矿模式。指出了下一步工作的重点区域。     

Comparison of ecophysiological characteristics between introduced and indigenous mangrove species in China

Due to its rapid growth, the introduced mangrove species Sonneratia apetala from Bangladesh has been widely used in mangrove restoration in southeastern China since 1985. As an indigenous mangrove species in Hainan, China, Sonneratia caseolaris was also planted in Guangdong Province for afforestation purposes. Both species have developed well in their new habitats, but their ecophysiological differences with the native mangrove species have not been studied. In this study, leaf gas exchange, water and nitrogen use efficiencies of two Sonneratia species were compared with those of selected native mangrove species (Avicennia marina, Aegiceras corniculatum, Kandelia candel, and Excoecaria agallocha) in Hainan and Shenzhen. The introduced S. apetala maintained lower carbon assimilation rate (A) and photosynthetic nitrogen use efficiency (PNUE) than the indigenous S. caseolaris. In Shenzhen, the two introduced Sonneratia had comparable photosynthetic rates and water use efficiency (WUE) with the native mangrove species, except that PNUE in S. caseolaris was significantly higher than in the native mangrove species. The two Sonneratia species showed significant overlap in PNUE and long-term WUE. Photosynthetic parameters derived from leaf photosynthetic light–response curves and A–C_i curves also suggested lower carbon assimilation capacities for the introduced Sonneratia than for the native mangrove species in both study sites. The lower light compensation point (LCP) of two introduced Sonneratia in both study sites also indicated a better adaptation to a low light regime than the native mangrove species. The results of photosynthetic capacities indicated that the introduced mangrove species have little competitive advantage over local native mangrove species in their respective new habitats.