Hydrochemical characterisation of ground and surface water at Dörtyol/Hatay/Turkey

The degradation of ground water quality due to human activities is a widespread environmental problem. Furthermore, coastal aquifers are threatened by sea water intrusion as a result of increasing water exploitation. The investigation area near Dörtyol is located at the Mediterranean coast, southern Turkey, and dominated by agricultural land use. Drinking, domestic and agricultural purposes require different amounts of uncontaminated water. In this study the hydrogeological characteristics of the coastal plain were investigated. Discharge and ground water level measurements as well as geological investigations were undertaken in field in addition to anion and cation analyses of ground and surface water. The results show geological and anthropogenic influence on ground and surface water composition. In spite of a large number of wells in the coastal area sea water intrusion was not detected. With the goal of devising sustainable water use regulations, more emphasis and research needs to be directed to the long-term observation of ground and surface water quality as well as the detailed investigation of hydraulic characteristics of the local aquifer.     

Chromium speciation in oxide-type compounds: application to minerals,gems, aqueous solutions and silicate glasses

Cr K-edge XANES spectra were obtained for a variety of Cr-bearing model compounds containing Cr(II), Cr(III), Cr(IV), Cr(V) and Cr(VI), in which the Cr-site symmetry is D4h, Oh and Td. The centroid position of the pre-edge feature is a better indicator of the Cr valence than the edge position. In Cr-rich oxides, higher-energy transitions must be excluded in order to refine a robust valence for Cr. The pre-edge for chromates is not unique and varies as a function of the CrO₄ ^2? moiety distortion, which is often related to Cr-polymerization (monochromate vs. dichromate). Both the analogy with the Mn K-pre-edge information and ab initio FEFF calculations of the pre-edge feature for Cr(III) and Cr(VI) confirm the experimental trends. This methodology is applied to the Cr K-edge pre-edge feature collected in gems (emerald, spinel and ruby), the layered minerals fuchsite and kämmererite, two Cr-bearing aqueous solutions and a set of sodo-calcic silicate glasses used for bottling sparkling white wine. In emerald and fuchsite, the Cr-site is differently distorted than its ruby or spinel counterpart. In a Cr(III)-bearing aqueous solution and sodo-calcic glass, no evidence for Cr(III) with Td and C3v symmetry is detected. However, minor amounts of chromate moieties (most likely monomeric) are detected in a glass synthesized in air. Preliminary spectra for the wine bottle glass suggest that only trace amounts of chromates might possibly be present in these glasses.     

GIS-based landslide susceptibility mapping using bivariate statistical analysis in Devrek (Zonguldak-Turkey)

Devrek town with increasing population is located in a hillslope area where some landslides exist. Therefore, landslide susceptibility map of the area is required. The purpose of this study was to generate a landslide susceptibility map using a bivariate statistical index and evaluate and compare the results of the statistical analysis conducted with three different approaches in seed cell concept resulting in different data sets in Geographical Information Systems (GIS) based landslide susceptibility mapping applied to the Devrek region. The data sets are created from the seed cells of (a) crowns and flanks, (b) only crowns, and (c) only flanks of the landslides by using ten different causative parameters of the study area. To increase the data dependency of the analysis, all parameter maps are classified into equal frequency classes based directly on the percentile divisions of each corresponding seed cell data set. The resultant maps of the landslide susceptibility analysis indicate that all data sets produce fairly acceptable results. In each data set analysis, elevation, lithology, slope, aspect, and drainage density parameters are found to be the most contributing factors in landslide occurrences. The results of the three data sets are compared using Seed Cell Area Indexes (SCAI). This comparison shows that the crown data set produces the most accurate and successful landslide susceptibility map of the study area.     

Sedimentological and stratigraphic evolution of northern Lebanon since the Late Cretaceous: implications for the Levant margin and basin

This paper presents an updated review of the Upper Mesozoic and Cenozoic sedimentological and stratigraphic evolution of the Levant margin with a focus on the northern Lebanon. Facies and microfacies analysis of outcrop sections and onshore well cores (i.e., Kousba and Chekka) supported by nannofossil and planktonic foraminifers biostratigraphy, allowed to constrain the depositional environments prevailing in the Turonian to Late Miocene. The “Senonian” (a historical term used to define the Coniacian to Maastrichtian) source rock interval was subdivided into four sub-units with related outer-shelfal facies: (1) Upper Santonian, (2) Lower, (3) Upper Campanian, and (4) Lower Maastrichtian. This Upper Cretaceous rock unit marks the major drowning of the former Turonian rudist platform. This paper confirms the Late Lutetian to Late Burdigalian hiatus, which appears to be a direct consequence of major geodynamic events affecting the Levant region (i.e., the continued collision of Afro-Arabia with Eurasia), potentially enhanced by regressional cycles (e.g., Rupelian lowstand). The distribution of Late Burdigalian–Serravallian rhodalgal banks identified in northern Lebanon was controlled by pre-existing structures inherited from the pulsating onshore deformation. Reef barriers facies occur around the Qalhat anticline, separating an eastern, restricted back-reef setting from a western, coastal to open marine one. The acme of Mount Lebanon’s uplift and exposure is dated back to the Middle–Late Miocene; it led to important erosion of carbonates that were subsequently deposited in paleo-topographic lows. The Late Cretaceous to Cenozoic facies variations and hiatuses show that the northern Lebanon was in a higher structural position compared to the south since at least the Late Cretaceous.     

Compressional behavior of clayey sand and transition fines content

Clayey sand can be considered as a composite matrix of coarse and fine grains. The interaction between coarser and finer grain matrices affects the overall stress–strain behavior of these soils. Intergranular void ratio, e_s (which is the void ratio of the coarser grain matrix) can be utilized as an alternative parameter to express the compressive response of such soils. Oedometer tests conducted on reconstituted kaolinite–sand mixtures indicate that initial conditions, percentage of fines, and stress conditions influence the compression characteristics evidently. Tests showed that, up to a fraction of fines, which is named as transition fines content (FC_t), compression behavior of the mixtures is mainly controlled by the sand grains. When concentration of fines exceeds FC_t, kaolinite controls the compression. It was found that FC_t varies between 19% and 34% depending on the above mentioned factors. This range of fines content is also consistent with various values reported in literature regarding the strength alteration. Performed direct shear tests revealed that there is also a close relationship between transition fines content and shear strength, which is harmonic with the oedometer test results.     

Decoupling of arsenic and iron release from ferrihydrite suspension under reducing conditions: a biogeochemical model

High levels of arsenic in groundwater and drinking water are a major health problem. Although the processes controlling the release of As are still not well known, the reductive dissolution of As-rich Fe oxyhydroxides has so far been a favorite hypothesis. Decoupling between arsenic and iron redox transformations has been experimentally demonstrated, but not quantitatively interpreted. Here, we report on incubation batch experiments run with As(V) sorbed on, or co-precipitated with, 2-line ferrihydrite. The biotic and abiotic processes of As release were investigated by using wet chemistry, X-ray diffraction, X-ray absorption and genomic techniques. The incubation experiments were carried out with a phosphate-rich growth medium and a community of Fe(III)-reducing bacteria under strict anoxic conditions for two months. During the first month, the release of Fe(II) in the aqueous phase amounted to only 3% to 10% of the total initial solid Fe concentration, whilst the total aqueous As remained almost constant after an initial exchange with phosphate ions. During the second month, the aqueous Fe(II) concentration remained constant, or even decreased, whereas the total quantity of As released to the solution accounted for 14% to 45% of the total initial solid As concentration. At the end of the incubation, the aqueous-phase arsenic was present predominately as As(III) whilst X-ray absorption spectroscopy indicated that more than 70% of the solid-phase arsenic was present as As(V). X-ray diffraction revealed vivianite Fe(II)₃(PO₄)₂.8H₂O in some of the experiments. A biogeochemical model was then developed to simulate these aqueous- and solid-phase results. The two main conclusions drawn from the model are that (1) As(V) is not reduced during the first incubation month with high Eh values, but rather re-adsorbed onto the ferrihydrite surface, and this state remains until arsenic reduction is energetically more favorable than iron reduction, and (2) the release of As during the second month is due to its reduction to the more weakly adsorbed As(III) which cannot compete against carbonate ions for sorption onto ferrihydrite. The model was also successfully applied to recent experimental results on the release of arsenic from Bengal delta sediments.     

Hydrogeochemical characteristics of central Jianghan Plain, China

The central Jianghan Plain is the semi-closed basin in the middle reaches of Yangtze River. A total of 78 water samples targeting groundwater were collected from 75 sites in this study site, the area between Yangtze River and Han River, including rivers and lakes for temperature, pH, electrical conductivity (EC), total dissolved solids (TDS) and ion composition measurements. Correlation matrix was used to assess the geochemical and anthropogenic processes. The most confined groundwater was grouped into HCO₃–Ca–Mg, while phreatic groundwater and surface water had a more diversified hydrochemistry. The spatial variation in overall water quality as well as comparison with WHO (World Health Organization) standards for drinking water is illustrated. Mn, As and NO₃ ^? concentrations were found to exceed the allowable limits for drinking water of WHO guidelines, and they also show remarkable spatial variations. Abnormally high nitrate concentration, up to 150–190 mg/l, was found only in phreatic groundwater, which suggested that the nitrate pollution might be caused by agricultural activities. The present study may be helpful in further studies concerning water quality issues in this area where groundwater is a vital source for drinking and other activities.     

Hydrologic models coupled with 2D hydrodynamic model for high-resolution urban flood simulation

Natural Hazards - Floods are the most frequent natural disaster and pose a very challenging threat to many cities worldwide. Understanding the flood dynamic is essential for developing strategies...     

The effect of cement material properties on the fracture patterns developing within cement-covered brittle sphere under impact

Acta Geotechnica - Dynamic loading experiments of single glass bead cement-covered by epoxy resins of different compositions demonstrate the existence of diverse fracture patterns under similar...