Building a semantic based public transportation geoportal compliant with the INSPIRE transport network data theme

Interoperability is becoming essential for the today’s geographic information systems. Geographic information is usually available as datasets stored in databases and accessible via GIS. However, these information sources are increasingly heterogeneous and show differences in data formats, database schema and object concepts. To satisfy the increased demand for the use and sharing of geographic data in common applications, considering the heterogeneity and the methods to support interoperability are required by the GIS community. The implementation of Spatial Data Infrastructure (SDI) such as the European INSPIRE (Infrastructure for Spatial Information in the European Community) enables accessibility and the sharing of geographic data and interoperability among the systems. In addition to this, traditional GIS systems perform spatial queries using a keyword-based method. However, this approach remains incapable of fully expressing the users' needs due to a lack of geographic concepts (semantics) in the dataset. Different terms may refer to similar concepts, while the same terms may refer to different concepts. This causes semantic heterogeneity in the dataset. In this context, the most promising approach is the implementation of geospatial semantics by means of ontology in the geospatial dataset to overcome this kind of ambiguity. The aim of this research is to investigate the implementation of INSPIRE as a SDI standard and the use of Semantic Technology to empower the traditional GIS approach. In this regard, a public transportation geoportal has been developed for the experimental investigation which uses a revised sample transportation data complaint with the INSPIRE Transport Network Data Theme and a developed Transportation Ontology Domain, including concepts, relationships and individuals to provide a semantic spatial search.     

Reciprocal influence of Kürtün Dam and wastewaters from the settlements on water quality in the stream Harşit,NE Turkey

This paper aims to reveal the reciprocal influence of Kürtün Dam and wastewaters from the settlements on the water quality in the stream Har?it, NE Turkey. Several key water-quality indicators were measured: water temperature (T), pH, dissolved oxygen (DO), electrical conductivity, water hardness, chemical oxygen demand (COD), ammonium nitrogen (NH₄ ⁺–N), nitrite nitrogen (NO₂ ^?–N), nitrate nitrogen (NO₃ ^?–N), total Kjeldahl nitrogen (TKN), total nitrogen (TN), orthophosphate phosphorus (PO₄ ^3?–P), and methylene blue active substances (MBAS). The monitoring and sampling studies were conducted every 15 days from March 2009 to February 2010 at two stations selected in the upstream and downstream of the Kürtün Dam. It was concluded that the Kürtün Dam Lake had a high-quality water in terms of T, pH, DO, COD, NH₄ ⁺–N, NO₂ ^?–N and NO₃ ^?–N values, but slightly polluted water with respect to TKN, PO₄ ^3?–P, and MBAS according to the Turkish Water Pollution Control Regulation. The dam improved the stream water quality by increasing the DO concentration, and decreasing the NO₂ ^?–N and PO₄ ^3?–P concentrations thanks to its hydraulic residence time despite the wastewater discharge by the nearby settlements. However, the wastewater discharge deteriorated the stream water quality increasing the COD, NH₄ ⁺–N, NO₃ ^––N, and TN concentrations.     

Submarine and coastal karstic groundwater discharges along the southwestern Mediterranean coast of Turkey

A 120 km-long part of the southwestern coast of Turkey, with well-developed karst terrain in contact with the sea, has been investigated by systematic diving surveys to determine the submarine groundwater discharges (SGDs). The physical, chemical and isotopic data have been used to determine the rate of the fresh groundwater end member (FEM) and its temporal dynamics. About 150 SGDs have been detected by diving surveys employed mostly up to a depth of 30 m below sea level (bsl). Among those, 15 SGDs are in the form of coastal or submarine caves with entrances ranging between sea surface and 40 m bsl. The FEM contribution in SGDs ranges from a few percent to more than 80%. Stable isotope data suggest a range of mean recharge area elevations extending from the coast to more than 1,000 m inland. In many of the SGDs, the FEMs are characterized by tritium-based residence times ranging from recent to several decades. Hypothetical geochemical calculations of mixing between freshwater and seawater end members reveal that more than 45% of freshwater contribution is required for karst development in the SGDs. Models suggest a threshold pH of 7.6 or lower for the carbonate rock dissolution.     

The effect of opium poppy oil diesel fuel mixture on engine performance and emissions

Recently, decreasing of fossil fuel reserves and their negative effect on environment have increased the interest in alternative energy sources. One of the alternative energy sources is vegetable oils. In this study, blends of 50 % opium poppy oil — 50 % diesel fuel mixture are tested as alternative fuel on a single cylinder, 4-stroke, air cooled, pre-combustion chamber diesel engine at different speeds and its effects on engine performance and emissions are investigated. When compared to the diesel fuel as average, engine torque and power decrease at 4 % and 5.73 %, respectively. Specific fuel consumption increases by using of 50% opium poppy oil — 50 % diesel fuel mixture. When compared to the diesel fuel as average, carbon monoxide and nitrogen oxides emissions of 50 % opium poppy oil — 50 % diesel fuel mixture decrease to 15.5 % and 5.9 %, respectively. Diesel fuel-opium poppy oil mixture has been found notably successful and environment friendly as an alternative fuel for diesel engines.     

Variation in time-to-compliance for pump-and-treat remediation of mass transfer-limited aquifers with hydraulic conductivity heterogeneity

In this study, the impact of correlation length (λ) of hydraulic conductivity (K) heterogeneity on pump-and-treat (P&T) remediation period (time-to-compliance) for a mass transfer-limited aquifer is evaluated. Additionally, impacts of variance (σ ²), different distributions of high and low K zones and different initial contaminant masses are explored. Two different P&T policies including different number of wells pumping at different rates are employed for the investigation. Simulation–optimization approach in which a genetic algorithm (GA) is linked with a groundwater flow and contaminant transport model is used. Results show that K heterogeneity, in terms of λ _ln K , s_ln K² \sigma_{\ln \,K}^{2} and respective locations of low and high K zones, significantly impacts the time-to-compliance. Contaminant presence at low K zones can increase the time required to clean up the aquifer. Lower variation is observed in time-to-compliance for the remediation design utilizing higher number of wells pumping at slower rates compared to the design with a single well pumping at a higher rate. Higher number of wells increases the robustness of P&T remediation system when aquifer is heterogeneous in K.     

Decolorization of Textile Azo‐metal Complex Dyes by a Halophilic Bacterium Isolated from Çamaltı Saltern in Turkey

The decolorization of some of azo‐metal complex dyes used in textile industry was investigated in this study. The halophilic prokaryotes isolated from a solar sea‐saltern (Çamalt?) in Turkey were screened for resistance to five commercial azo and mixture of azo‐metal complex dyes. Only one bacterium was found to be resistant against two of dyes, namely Lanaset Navy R and Lanaset Brown B. The bacterium was identified as Halobacillus sp. C‐22 according to 16S rRNA gene sequence analyses. Decolorization experiments were carried out at 120 mg/L concentration of both dyes, at room temperature, and with an acidic pH of 4.5. Lanaset Brown B was decolorized at a high adsorbance ratio (96.12%) at the 78th hour. However, Lanaset Navy R was rapidly decolorized in 10 min (46.67%) and showed the highest adsorbance ratio (60.66%) at the third hour. Freundlich and Langmuir equilibrium isotherm models were used to evaluate the adsorption of dyes and Freundlich isoterm was more suitable for biosorpsiyon of both azo dyes. The functional groups on Halobacillus sp. C‐22 for decolorization were characterized by FT‐IR. This is the first study to reveal potential of Halobacillus sp. for decolorization of textile azo‐metal complex dyes.     

Trace metal levels in edible wild fungi

Metal levels (cadmium, cobalt, chromium, copper, iron, nickel, lead and zinc) of seventeen different edible wild fungi species (Agaricus campestris, Calocybe gambosa, Coprinus comatus, Hericium coralloides, Hydnum repandum, H. repandum var. rufescens, Lactarius deliciosus, L. salminocolor, Macrolepiota procera, Pleurotus ostreatus, P. ostreatus var. columbinus, Ramaria aurea, R. stricta, Rhizopogon luteolus, Sparassis crispa, Suillus bovinus, Tricholoma terreum) growing in Bolu-Turkey were measured by inductively coupled plasma optical emission spectrocopy. The obtained data were analyzed with “statistical package for the social sciences” statistics program. In addition, relation between metal concentrations in both soil and fungi samples were investigated. The highest metal concentrations in Bolu District, Turkey were measured in A. campestris (cadmium 0.270, chromium 2.735 and zinc 7.683), C. comatus (iron 160.12), M. procera (copper 15.990, cobalt 0.352 and nickel 3.645), R. luteolus (Pb 4.756) mg/kg dw (dry weight). As a result of the measurements, it was observed that metal uptake is related with the species of fungi and is also affected by pH and organic contents of the soil.     

Bench blasting design based on site-specific attenuation formula in a quarry

This research was performed on the quarry that will be opened to produce aggregates and rock filling material at Catalagzi region at Zonguldak province in Turkey. However, there are some structures which can be adversely affected by blasting at the quarry. These structures are a methane exploration drill hole and a house at the distances of 340 and 390 m, respectively. One of the main goals of this study is to perform a preliminary assessment of possible damage effect of ground vibrations induced by blasting on these structures by risk analysis based on ground vibration measurements. In order to propose a preliminary blast design models separately for aggregate and rock filling material production, six test shots with different maximum charge per delay were planned and fired at the quarry. In these shots, 90 events were recorded. To predict peak particle velocity (PPV), the relationship between the recorded peak particle velocities and scaled distances were investigated. During this investigation, the data pairs were statistically analyzed and a PPV prediction equation specific to this site with 95% prediction line were obtained. And also, this equation was used in the derivation of the practical blasting charts specific to this site as a practical way of predicting the peak particle velocity and maximum charge per delay for future blasting. A risk analysis was performed by using this equation. In the light of this analysis, preliminary blast design models were proposed to be used in this quarry for aggregate and rock filling material production.     

Adsorption Kinetic and Equilibrium Studies on Removal of Lead(II) onto Glutamic Acid/Sepiolite

In this study, a modified method was used to increase the adsorption of lead ions from aqueous solutions by using modified clay mineral on the laboratory scale. Adsorption experiments have been carried out on the use of both thermal activated sepiolite (TAS) and their glutamate/sepiolite modification (GS) as adsorbents. The experimental data was analyzed using adsorption kinetic models (pseudo first‐ and second‐order equations). The pseudo second‐order kinetic model fitted well to the kinetic data (R² ≥ 0.99). Then, the Freundlich and Langmuir models were applied to describe the uptake of Pb(II) on GS and the Langmuir isotherm model agrees well with the equilibrium experimental data (R² ≥ 0.97). The maximum adsorption capacity was observed to be 128.205 mg/g by GS according to the Langmuir equation. Desorption efficiency of the GS was studied by the batch method using EDTA, HCl, and HNO₃ solutions. Desorption of 69.18, 74.55, and 80% of Pb(II) from GS was achieved with 0.1 M EDTA, 0.1 M HCl, and 0.1 M HNO₃ solutions, respectively. FTIR analysis suggests the importance of functional groups such as amino, hydroxyl, and carboxyl during Pb(II) removal. SEM observations demonstrated that an important interaction at the lead‐modified sepiolite interface occurred during the adsorption process. In addition, the thermodynamic constants was calculated that the values of the Gibbs free energy (ΔG*), enthalpy (ΔH*), and entropy (ΔS*) of modification were 86.79 kJ/mol, ?18.91 kJ/mol, and ?354.70 J/mol/K, respectively. The negative value of ΔH* shows exothermic nature of adsorption.