Stable isotope constraints on the fluid source of hydrothermal breccia pipes in the Tankwa Karoo depocentre,South Africa: Breakdown of authigenic minerals during sill intrusion

The Karoo Basin covers much of South Africa and is an area of prospective shale gas exploration, with the Whitehill Formation the target shale unit. However, the sedimentary succession, including the Whitehill, has been intruded by a series of sills and dykes associated with the Karoo Large Igneous Province (~183 Ma), which are expected to have modified the thermal history of the basin dramatically. Here, we investigate a secondary effect of these intrusions: a series of hydrothermal vent complexes, or breccia pipes, focusing on using O, H, and C isotopes to constrain the origin and evolution of fluids produced during the intrusion of basaltic sills. A cluster of breccia pipes have been eroded down to the level of the Ecca Group at Luiperdskop on the western edge of the Karoo basin; a small isolated pipe of similar appearance crops out 13 km to the east. The Luiperdskop pipes are underlain by a Karoo dolerite sill that is assumed to provide the heat driving fluidization. The pipes consist of fine‐grained matrix and about 8% clasts, on average, of mostly sedimentary material; occasional large rafts of quartzite and dolerite are also present. The presence of clasts apparently from the Dwyka Group is consistent with the depth of formation of the pipes being at, or near, the base of the Karoo Supergroup, between 400 and 850 m below present surface. The presence of chlorite as the dominant hydrous mineral is consistent with an emplacement temperature between 300 and 350°C. The major and trace element, and O‐ and H‐isotope composition of the Tankwa breccias is homogenous, consistent with them being derived from the same source. The δ¹⁸O values (vsVSMOW) of the breccias are relatively uniform (7.1‰–8.7‰), and are similar to that of the country rock shale, and both are lower than expected for shale. The water content of the breccia is between 2.7 and 3.1 wt.% and the δD values range from ?109‰ to ?144‰. Calcite in vesicles has δ¹³C and δ¹⁸O (VSMOW) values of ?4.2‰ and 24.0‰, respectively. The low δD value of the breccia rocks does not appear to be due to the presence of methane in the fluid. Instead, it is proposed that low δD and δ¹⁸O values are the result of the fluid being derived from the breakdown of clay minerals that formed and were deposited at a time of cold climate at ~290 Ma.     

Human and climate forcing of zooplankton populations: Introduction

Zooplankton play a key role in the pelagic foodweb by controllingphytoplankton production and shaping pelagic ecosystems. Inaddition, because of their critical role as a food source forlarval and juvenile fish, the dynamics of zooplankton populationshave a significant influence on recruitment to fish stocks.In 1961, ICES convened the First Zooplankton Production Symposiumin Charlottenlund, Denmark. ICES also played a leading rolein the Second Zooplankton Production Symposium on "ZooplanktonProduction: measurement and role in global     

Experimental formation of massive hydrate deposits from accumulation of CH4 gas bubbles within synthetic and natural sediments

In order for methane to be economically produced from the seafloor, prediction and detection of massive hydrate deposits will be necessary. In many cases, hydrate samples recovered from seafloor sediments appear as veins or nodules, suggesting that there are strong geologic controls on where hydrate is likely to accumulate. Experiments have been conducted examining massive hydrate accumulation from methane gas bubbles within natural and synthetic sediments in a large volume pressure vessel through temperature and pressure data, as well as visual observations. Observations of hydrate growth suggest that accumulation of gas bubbles within void spaces and at sediment interfaces likely results in the formation of massive hydrate deposits. Methane hydrate was first observed as a thin film forming at the gas/water interface of methane bubbles trapped within sediment void spaces. As bubbles accumulated, massive hydrate growth occurred. These experiments suggest that in systems containing free methane gas, bubble pathways and accumulation points likely control the location and habit of massive hydrate deposits.     

A comparison of state space and multiple regression for monthly forecasts: U.S. Fuel consumption

Monthly consumption forecasts for U.S. oil, natural gas, and coal are made using state space and multiple regression applied to the same data. These forecasts are compared with actual consumption for a test period. The forecasts made using state space are preferred to those made using multiple regression models for both expost and exante cases. The state space forecasts track data cycles better than do the regression forecasts. Average absolute forecast errors are less for the state space models than they are for the multiple regression models.     

Volatiles H2O,CO2, and Cl in a subduction related basalt

The products of the 1974 eruption of Fuego, a subduction zone volcano in Guatemala, have been investigated through study of silicate melt inclusions in olivine. The melt inclusions sampled liquids in regions where olivine, plagioclase, magnetite, and augite were precipitating. Comparisons of the erupted ash, groundmass, and melt inclusion compositions suggest that the inclusions represent samples of liquids present in a thermal boundary layer of the magma body. The concentrations of H₂O and CO₂ in glass inclusions were determined by a vacuum fusion manometric technique using individual olivine crystals (Fo77 to Fo71) with glass inclusion compositions that ranged from high-alumina basalt to basaltic andesite. Water, Cl, and K₂O concentrations increased by a factor of two as the olivine crystals became more iron-rich (Fo77 to Fo71) and as the glass inclusions increased in SiO₂ from 51 to 54 wt.% SiO₂. The concentration of H₂O in the melt increased from 1.6 wt.% in the least differentiated liquid to about 3.5% in a more differentiated liquid. Carbon dioxide is about an order of magnitude less abundant than H₂O in these inclusions. The gas saturation pressures for pure H₂O in equilibrium with the melt inclusions, which were calculated from the glass inclusion compositions using the solubility model of Burnham (1979), are given approximately by P(H₂O)(Pa)=(SiO₂−48.5 wt.%) × 1.45 × 10⁷. The concentrations of water in the melt and the gas saturation pressures increased from about 1.5% to 3.5% and from 300 to 850 bars, respectively, during pre-eruption crystallization.     

Initial volatilization temperatures and average volatilization rates of coal — Their relationship to coal rank and other characteristics

Two thermal parameters, initial volatilization temperature (IVT) and average volatilization rate (AVR), have been determined by thermogravimetric analysis in argon for 38 coal samples ranging in rank from lignite to low-volatile bituminous. Both IVT and AVR are correlated with percent volatile matter and vitrinite reflectance.The IVT values increase gradually from about 250 to 445°C with increasing rank; however, a change in slope is observed in the region of high-volatile bituminous coals (from about 340°C to about 380°C) when IVT's are plotted against percent volatile matter or percent fixed carbon. The changes in slope near 340°C and near 380°C occur at “coalification jumps” recognized on the basis of changes in the optical and chemical character of the macerals. In general, AVR values decrease gradually with increasing rank for the lignite and sub-bituminous coals and for the medium- and low-volatile bituminous coals; however, a sharp increase in AVR occurs in high-volatile bituminous coals. The change in slope of the IVT curves and sharp increase in the AVR values for high-volatile bituminous coals reflect the development of new, higher vapor pressure organic compounds produced during this stage of the coalification process.A plot of AVR vs IVT reveals three regions which correspond to: (1) lignite and sub-bituminous coals; (2) high-volatile bituminous coals; and (3) medium- to low-volatile bituminous coals.     

Earthquake simulator testing of pounding between adjacent buildings

Two-storey-building frames have been designed and built in an effort to investigate the pounding phenomenon of adjacent buildings during earthquakes. Static tests have been first performed to determine the static characteristics and the support conditions of the test structures. Sinusoidal and random acceleration signal tests have been subsequently performed to determine the dynamic characteristics of the test structures. Two series of tests were carried out using the shaking table simulator. In the first case, the dynamic response has been recorded without pounding, while in the second case, the test structures have been placed with zero-gap separation and pounding was induced. Input energy time histories were correlated and compared with and without pounding. The experimental results were compared with analytical ones based on a formulation of the contact impact problem by the Lagrange multiplier method. Good agreement between the experimental and the analytical results was achieved.     

Detecting Changes in Ground Water Quality at Regulated Facilities

The Resource Conservation and Recovery Act (PL 94–580) and related federal and state legislation have mandated routine monitoring of ground water quality at regulated facilities. The objective of the required monitoring activities is detection of adverse changes in ground water quality caused by the facilities.
Both failure to detect pollution and an incorrect determination of pollution can be very expensive. It is crucial, therefore, that monitoring programs be designed and operated to provide statistically sound information. It is equally important that users of ground water quality data understand the nature and limitations of information from monitoring.
To address the preceding issues, the authors present a general approach to analyzing ground water quality data in light of the stated monitoring objective. The suggested approach accounts for "natural" variation in background water quality through pairing of observations. The limitations of quarterly sampling for detecting small changes in quality over a short time frame are discussed.     

Vertical distribution of plankton in the skagerrak in relation to doming of the seasonal thermocline

In the central Skagerrak between Norway and Denmark, the seasonal thermocline tends to be relatively shallow (10 to 15 m) probably due to geostrophic effects. An investigation of phytoplankton distribution in this region in late August 1981 showed the presence of an intense subsurface chlorophyll maximum (up to 30 γ 1⁻ Chl a) at a temperature of <6°C, dominated by coccolithophores and the dinoflagellate, Prorocentrum minimum. Data are presented on the vertical distribution of zooplankton in relation to these phytoplankton populations.