LEVINSON INVERSION OF EARTHQUAKE GEOMETRY SH-TRANSMISSION SEISMOGRAMS IN THE PRESENCE OF NOISE*

The Kunetz-Claerbout equation for the acoustic transmission problem in a layered medium in its original form establishes the relation between the transmission and the reflec tion response for P-waves in an horizontally layered medium and with vertical incidence. It states that the reflection seismogram due to an impulsive source at the surface, is one side of the autocorrelation of the seismogram due to an impulsive source at depth and a surface receiver. By adapting Claerbout's formulation to the transmission of SH-waves, the Kunetz-Claerbout equation also holds for reflection and transmission coefficients dependent on the incident angle. Thus, earthquake geometry SH-transmission seismograms can be used to caculate corresponding pseudoreflection seismograms which, in turn, can be inverted for the impedance structure using the Levinson algorithm. If the average incidence angle is known, a geometrical correction on the resulting impedance model can improve the resolution of layer thicknesses. In contrast to the inversion of reflection seismograms, the Levinson algorithm is shown to yield stable results for the inversion of transmission seismograms even in the presence of additive noise. This noise stabilization is inherent to the Kunetz-Claerbout equation. Results of inverted SH-wave microearthquake seismograms from the Swabian Jura, SW Germany, seismic zone obtained at recording site Hausen im Tal have been compared with sonic-log data from nearby exploration drilling at Trochtelfingen. The agreement of the main structural elements is fair to a depth of several hundred metres.     

Application of saddlepoint approximation in reliability analysis of dynamic systems

The application of the saddlepoint approximation to reliability analysis of dynamic systems is investigated. The failure event in reliability problems is formulated as the exceedance of a single performance variable over a prescribed threshold level. The saddlepoint approximation technique provides a choice to estimate the cumulative distribution function (CDF) of the performance variable. The failure probability is obtained as the value of the complement CDF at a specif ied threshold. The method requires computing the saddlepoint from a simple algebraic equation that depends on the cumulant generating function (CGF) of the performance variable. A method for calculating the saddlepoint using random samples of the performance variable is presented. The applicable region of the saddlepoint approximation is discussed in detail. A 10-story shear building model with white noise excitation illustrates the accuracy and effi ciency of the proposed methodology.     

Lateral continuity of basement seismic reflections in 15 Ma ultrafast-spreading crust at ODP Site 1256

The Ocean Drilling Program (ODP) initiated drilling at Site 1256D in the Guatemala Basin, about 1,000 km off the East Pacific Rise to penetrate plutonic rocks, anticipated to be relatively shallow in this region, formed at an ultra-fast spreading rate. IODP Expedition E312 successfully drilled into gabbros at ~1,150 m in basement. Multi-channel seismic traces show weak laterally coherent sub-basement reflections at borehole depths. Synthetic reflectivity seismograms were computed using a Ricker wavelet and impedance profiles from borehole sonic logs. These seismograms show significant sub-basement amplitude peaks. A zero-offset vertical seismic profile, shot on E312, was processed to investigate the authenticity of these reflections and their relationship to borehole geology. A dual scheme of the median filtering and F–K dip filtering was used. Tests with synthetic seismograms indicate the approach is effective at reasonable SNR levels. Downgoing energy is clearly identified but negligible upgoing energy is visible over random noise. These results indicate that lava flows and igneous contacts in upper ocean crust have significant topography on lateral scales less than the Fresnel Zone (~300 m) due to igneous and tectonic processes.     

Microbial community dynamics and biodegradation of polycyclic aromatic hydrocarbons in polluted marine sediments in Hong Kong

Dynamics of microbial community and biodegradation of polycyclic aromatic hydrocarbons (PAHs) in polluted marine sediments, artificially spiked with a mixture of PAHs (fluorene, phenanthrene, fluoranthene and pyrene), were examined for a period of 60 days. Microbial communities were characterised by bacterial counts, ester-linked fatty acid methyl ester (EL-FAME) analysis and denaturing gradient gel electrophoresis (DGGE). A noted reduction in species diversity occurred only in the high PAH level treatment at onset. Both EL-FAME and DGGE demonstrated a marked shift in microbial community, in all the PAH level treatments, afterwards, with increases in the number of fatty acid degraders, the relative abundance of fatty acid biomarkers for gram-negative bacteria and a decrease in species diversity. The shift was also accompanied by the significant decrease in PAH concentrations. By the end of the experiment, diversity indices, based on both approaches, recovered when PAH concentrations declined to their background levels, except in the high PAH level treatment.     

Comparison of ecophysiological characteristics between introduced and indigenous mangrove species in China

Due to its rapid growth, the introduced mangrove species Sonneratia apetala from Bangladesh has been widely used in mangrove restoration in southeastern China since 1985. As an indigenous mangrove species in Hainan, China, Sonneratia caseolaris was also planted in Guangdong Province for afforestation purposes. Both species have developed well in their new habitats, but their ecophysiological differences with the native mangrove species have not been studied. In this study, leaf gas exchange, water and nitrogen use efficiencies of two Sonneratia species were compared with those of selected native mangrove species (Avicennia marina, Aegiceras corniculatum, Kandelia candel, and Excoecaria agallocha) in Hainan and Shenzhen. The introduced S. apetala maintained lower carbon assimilation rate (A) and photosynthetic nitrogen use efficiency (PNUE) than the indigenous S. caseolaris. In Shenzhen, the two introduced Sonneratia had comparable photosynthetic rates and water use efficiency (WUE) with the native mangrove species, except that PNUE in S. caseolaris was significantly higher than in the native mangrove species. The two Sonneratia species showed significant overlap in PNUE and long-term WUE. Photosynthetic parameters derived from leaf photosynthetic light–response curves and A–C_i curves also suggested lower carbon assimilation capacities for the introduced Sonneratia than for the native mangrove species in both study sites. The lower light compensation point (LCP) of two introduced Sonneratia in both study sites also indicated a better adaptation to a low light regime than the native mangrove species. The results of photosynthetic capacities indicated that the introduced mangrove species have little competitive advantage over local native mangrove species in their respective new habitats.     

An Analytical Model For Threshold Crossing Rates Of Concentration Fluctuations In Dispersing Plumes

A simple analytical model is developed for the meanupcrossing rate of plume concentration fluctuations assuming that thisprocess can be well approximated by a lognormal process. The resultingexpression requires only the specification of the in-plume fluctuationintensity and in-plume Taylor micro-time scale and, hence, does notexplicitly involve the joint probability density function of theconcentration and its derivative. The analytical model provides agood fit to some field measurements of the mean upcrossing rate ina dispersing plume.     

Groundwater Resources and Their Role in Water Supply to Crimea

The processes of formation and distribution of the resources of fresh groundwater and surface water in the territory of Crimea Peninsula are considered. Water availability in the natural–historic and administrative regions of the republic is characterized. The proportions between different categories of groundwater resources are shown with their role in water supply to Crimea taken into account. The presentday development of groundwater resources is analyzed and the possible increase in water consumption meeting geoecological requirements is substantiated.     

An inter-comparison of tidal solutions computed with a range of unstructured grid models of the Irish and Celtic Sea Regions

Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M₂, M₄ and M₆ components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M₂ tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M₂ tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M₂ tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M₄ tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M₆ component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M₂ and M₄ tide between models remained. For M₆, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M₂ tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M₄, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M₆ in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M₆ tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.     

Tectonics of southwestern Mexico,isotopic evidence,nuclear Central America,Late Cretaceous break up

In the paleogeographic reconstruction of Mexico and northern Central America, an ever-increasing amount of evidence shows that the entire region is a collage of suspect terranes transported from abroad, whose timing and sense of motion are now beginning to be understood. Among these, the Chortis block (nuclear Central America) and the Baja California Peninsula have been proposed as pieces of continent separated from the Pacific coast of southwestern Mexico, that have moved either southeastward by the Farallon plate or northwestward by the Kula plate. Previous studies mainly confined to the northern margin of the Chortis block, confirmed a left-lateral displacement of 130 km in Neogene time. Further studies made northwestward along the Mexican coast provided a better understanding of magmatic and metamorphic processes in the area, and suggested times of detachment increased to 30 Ma, 40 Ma, and 66 Ma. The pre-detachment westernmost position of the block has changed, depending on the model chosen, from Puerto Vallarta and beyond, to the current position. Here we show that the isotopic mineral ages from coastal granites along the coast from Puerto Vallarta, Jalisco (80 Ma) to Puerto Angel, Oaxaca (11 Ma) record systematic decrease of cooling ages from NW to SE. This pattern is interpreted to result from the progressive uplift of rocks exposed at the present-day coast in that direction, such uplift occurred in response to the development of the Middle America Trench at the newly formed continental margin when the Chortis block was sliding at an average rate of 1.5 cm/year in a sinistral sense to its present position. Our results also constrain the position of the Kula-Farallon spreading axis north of Puerto Vallarta. These observations led us to conclude that several indicators point to this time and region for the onset of strike-slip drifting of the Chortis block toward its current position. Here, we also present several view points in terms of other possilble interpretations to different tectonic, geologic and isotopic data sets published recently by different authors.     

Über den Eisengehalt von Alumosilikaten aus Quarzknauern

Zusammenfassung Der Eisengehalt von Andalusiten und Disthenen aus Quarzknauern im Gebiet des Ötztaler—Stubaier Altkristallins wurde regional untersucht. Der Gehalt and Gesamteisen in primären Disthen liegt zwischen 0,17 und 0,22 Gew.% Fe₂O₃, während primäre Andalusite zwischen 0,26 und 1,93 Gew.% Fe₂O₃ schwanken. Dieser Unterschied in den Andalusiten wird auf ein wechselndes Angebot von Fe₂O₃ aus dem Nachbargestein der Knauern zurückgeführt.Ein Zusammenhang zwischen dem Eisengehalt der Andalusite und den verschiedenen Umwandlungsstadien Andalusit—Disthen konnte nicht nachgewiesen werden.

---

On the iron content of alumosilicates in quartz nodules

Summary A determination of the regional distribution of the ironcontent of andalusites and kyanites in quartz-segregations of the Oetztal—Stubai crystalline complex gave values of 0.17–0.22% for the total iron in primary kyanite and 0.26–1.93% in andalusite. This difference is probably due to a variation in the Fe₂O₃-content in the country rocks of the quartz veins. No relationship between the iron-content in andalusite and the different stages of transformation from andalusite to kyanite could be established.