Presence of radon in groundwater in parts of Bangalore

Presence of high levels of Radon (²²²Rn) gas was reported from groundwater in Bangalore. To ascertain the ground reality and the nature of the hazards, if any, a study was conducted by the Central Ground Water Board, Bangalore in and around Bangalore city. Groundwater samples from borewells and a dug well were collected and analysed. Available data on Radon gas from both groundwater and surface water sources were also compared. The presence of Radon gas and its concentration in groundwater were examined with respect to geology and well depths. The results are discussed in the paper.     

Calibration of the parameters for a hardening–softening constitutive model using genetic algorithms

The present paper introduces a genetic algorithm-based optimization technique to calibrate a nonlinear strain hardening–softening constitutive model for soils using five material parameters. The efficiency of the proposed technique is analyzed through the use of different GA techniques. The effects of elitism, crossover, and mutation, as well as population size, on the performance of the conventional GAs for this problem are investigated. Micro-genetic algorithms (mGAs) are chosen and tested for different population sizes. The mGAs with a population size of five yields the optimal parameter values after fewer function evaluations and capture the overall simulated or experimental behavior at every point in stress–strain and strain paths in triaxial compression. The proposed calibration technique is validated through comparison with the traditional calibration technique.     

Hydrologic characteristics of floods in Ganges–Brahmaputra–Meghna (GBM) delta

In the middle of 2007, a severe flood affected the People’s Republic of Bangladesh. This is a natural disaster that takes people’s lives, destroys livestock, infrastructures and communication systems and, damages crops and fish ponds. Despite many adverse impacts, the flood situation is an accepted phenomenon to the citizens of Bangladesh, due to the immense increase of soil fertility due to the flood, plus, the recharge of aquifer, ecosystem and fish. The flood of 2007 was the 5th major flood of the last 20 years when more than thirty-five percent of the area of the country was inundated with flood water. As in the past, the flood of 2007 had its own significance. The geography of the country contains a floodplain delta of three major river basins: the Ganges, the Brahmaputra and the Meghna (GBM). The mean monthly rainfall plot from the TRMM satellite data has shown that for both the Meghna and Brahmaputra basins, the rainfall was higher during July 2007 than any other months of the last 2 years. This excess rainfall had accumulated in the Brahmaputra and Meghna rivers and carried downstream to Bangladesh. This was the main cause of the flooding in 2007. The first crossing above the danger level of the river waters was observed at Durgapur station of the Someswari and at Sunamganj station of the Surma on the nineteenth of July, 2007 inside Bangladesh. In terms of magnitude of the peak and duration of the flood, the Brahmaputra was higher in 2007 than during 2004. However, the Ganges river water level never crossed the danger level during flood of 2007. The Meghna was lower during the flood peak for the duration of the flood in 2007. The year–to-year variability in both the magnitude and duration of the flood suggests changes in rainfall and landuse pattern of the catchment.     

Seismic hazard assessment for Mymensingh,Bangladesh

Mymensingh municipality lies in one of the most earthquake-prone areas of Bangladesh. The town was completely destroyed during the Great Indian Earthquake of 12 June 1897, for which the surface-wave magnitude was 8.1. In this study the 1897 Great Indian Earthquake was used as a scenario event for developing seismic microzonation maps for Mymensingh. For microzonation purposes SPT data from 87 boreholes were collected from different relevant organizations. To verify those data ten boreholes of depth up to 30 m were drilled. Intensity values obtained for different events were calibrated against attenuation laws to check applicability to the study area. Vibration characteristics at diverse points of the study area were estimated by employing the one-dimensional wave-propagation software SHAKE. SHAKE discretizes the soil profile into several layers and uses an iterative technique to represent the non-linear behavior of the soil by adjusting the material properties at each iteration step. The required input information includes depth, shear wave velocity, damping factor, and unit weight of each soil layer. The liquefaction resistance factor and the resulting liquefaction potential were estimated to quantify the severity of liquefaction. Quantification of secondary site effects and the weighting scheme for combining the various seismic hazards were heuristic, based on judgment and expert opinion.     

Hydrochemical characteristics and quality assessment of shallow groundwater in a coastal area of Southwest Bangladesh

In this study, the hydrochemical characteristics of shallow groundwater in a coastal region (Khulna) of southwest Bangladesh have been evaluated based on different indices for drinking and irrigation uses. Water samples were collected from 26 boreholes and analyzed for major cations and anions. Other physico-chemical parameters like pH, electrical conductivity (EC), and total dissolved solids were also measured. Most groundwater is slightly alkaline and largely varies in chemical composition, e.g. EC ranges from 962 to 9,370 μs/cm. The abundance of the major ions is as follows: Na⁺ > Ca²⁺ > Mg²⁺ > K⁺ = Cl⁻ > HCO₃ ⁻ > SO₄ ²⁻ > NO₃ ⁻. Interpretation of analytical data shows two major hydrochemical facies (Na⁺–K⁺–Cl⁻–SO₄ ²⁻ and Na⁺–K⁺–HCO₃ ⁻) in the study area. Salinity, total hardness, and sodium percentage (Na%) indicate that most of the groundwater samples are not suitable for irrigation as well as for domestic purposes and far from drinking water standard. Results suggest that the brackish nature in most of the groundwaters is due to the seawater influence and hydrogeochemical processes.     

Spatiotemporal variation and mechanisms of temperature inversion in the Bay of Bengal and the eastern equatorial Indian Ocean

In the northern Bay of Bengal, the existence of intense temperature inversion during winter is a widely accepted phenomenon. However, occurrences of temperature inversion during other seasons and the spatial distribution within and adjacent to the Bay of Bengal are not well understood. In this study, a higher resolution spatiotemporal variation of temperature inversion and its mechanisms are examined with mixed layer heat and salt budget analysis utilizing long-term Argo（2004 to 2020） and RAMA（2...     

Gravity anomalies,flexure, and deformation of the converging Indian lithosphere in Nepal and Sikkim–Darjeeling Himalayas

Researchers ubiquitously noted that the common processes of partitioning oblique convergence in response to drag from the trench-hanging plate simultaneously produce radial slips, along-strike translation, and extension parallel to the deformation front. Here, we focus on the area between Nepal and Sikkim–Darjeeling Himalayas, and carry out gravity and finite-element stress modeling of the strike-orthogonal converging Indian lithosphere. We delineate the geometries of different layers and their interfaces through gravity modeling. The optimum model parameters along with rheological parameters of different layers are used for finite-element modeling. Finite-element modeling is done with boundary conditions of keeping the upper surface free and rigidly fixing the section of the northern boundary below the Main Himalayan Thrust. We impart on its frontal section an amount of 6 × 10¹² N/m force, equivalent to resistive force of the Himalayan–Tibet system, and analyze the maximum and minimum compressive stress fields evolved in the lithosphere. We testify our observations with earthquake database and other geophysical and geological studies. We note that an increasing flexing of the Indian lithosphere beyond the Main Boundary Thrust becomes maxima between the Main Central Thrust and South Tibetan Detachment in both the areas; however, more steepening of the Moho boundary is identified in the Sikkim–Darjeeling Himalaya. This abrupt change in lithospheric geometry beneath the Greater Himalaya is likely correlated with the sharp elevation changes in the topography. Although the highest seismicity concentration is dominant in this zone, the Lesser and the Tethys Himalayas in Sikkim–Darjeeling area also record relatively fair seismic activity. More compressive stress field in different layers right within the sharp bending zone supports this observation. We thus propose that the sharp bending zone beneath the Greater Himalaya is suffering maximum deformation, and the deformation is continued in the mantle too. We also identify both right-lateral shear and radial vergence slip, which are presumably associated with the general dynamics and kinematics of the Himalaya.     

Partitioning of dioxins (PCDDs/Fs) in ambient air at urban residential locations

In this work, 17-polychlorinated dibenzo-p-dioxin/furan (PCDD/Fs) isomers were measured in ambient air at four urban sites in Seoul, Korea (from February to June 2009). The concentrations of their summed values (ΣPCDD/Fs) across all four sites ranged from 1,947 (271 WHO₀₅ TEQ) (Jong Ro) to 2,600 (349 WHO₀₅ TEQ) fg/m³ (Yang Jae) with a mean of 2,125 (± 317) fg/m³ (292 WHO₀₅ TEQ fg/m³). The sum values for the two isomer groups of ΣPCDD and ΣPCDF were 527 (30 WHO₀₅ TEQ) and 1,598 (263 WHO₀₅ TEQ) fg/m³, respectively. The concentration profile of individual species was dominated by the 2,3,4,7,8-PeCDF isomer, which contributed approximately 36 % of the ΣPCDD/Fs value. The observed temporal trends in PCDD/F concentrations were characterized by relative enhancement in the winter and spring. The relative contribution of different sources, when assessed by principal component analysis, is explained by the dominance of vehicular emissions along with coal (or gas) burning as the key source of ambient PCDD/Fs in the residential areas studied.     

Utilization of ochre as an adsorbent to remove Pb(II) and Cu(II) from contaminated aqueous media

The ability of ochre to remove Pb(II) and Cu(II) from aqueous media has been studied by batch sorption studies varying the contact time, initial metal concentration, initial solution pH and temperature to understand the adsorption behaviour of these metals through adsorption kinetics and isotherms. The pH of the solution and the temperature controlled the adsorption of metal ions by ochre and rapid uptake occurred in the first 30 min of reaction. The kinetics of adsorption followed a pseudo-second-order rate equation (R ² > 0.99) and the isotherms are well described by the Freundlich model. Adsorption of metals onto ochre is endothermic in nature. Between the two metals, Pb(II) showed more preference towards the exchangeable sites on ochre than Cu(II). This study indicates that ochre is a very effective adsorbent in removing Pb(II) and Cu(II) from the aqueous environment with an adsorptive capacity of 0.996 and 0.628 mg g^?1 and removal efficiency of 99.68 and 62.80 %, respectively.