The study of metal contamination in urban topsoils of Mexico City using GIS

This research presents and discusses information concerning the spatial distribution of heavy metals (Pb, Cu, Zn, Ba, Co, Cr, Ni and V) in the urban environments of Mexico City using geographical information system and statistical analysis. Superficial soil samples (n = 146) were analyzed. The highest contamination indices were found in the north and center zone of the metropolitan area. In contrast, the surrounding rural fields show a lower impact grade. The higher concentrations of Pb, Cu, Zn and Ba were observed as being related to high vehicular traffic, nevertheless other elements such as Co, Cr, Ni and V do not show anthropogenic influence and their content can be attributed to the parental rock. The results are compared with previous surveys carried out in 2003 in order to evaluate temporal deposition trends. No changes were found on reported concentrations except for Cu and Zn, whose concentration has increased in later years. The results suggest that spatial distribution analysis and results in comparison with previous studies could be useful for the management and sustainable development of the metropolitan area of Mexico City.     

Flow dynamics at the origin of thin clayey sand lacustrine turbidites: Examples from Lake Hazar,Turkey

Turbidity currents and their deposits can be investigated using several methods, i.e. direct monitoring, physical and numerical modelling, sediment cores and outcrops. The present study focused on thin clayey sand turbidites found in Lake Hazar (Turkey) occurring in eleven clusters of closely spaced thin beds. Depositional processes and sources for three of those eleven clusters are studied at three coring sites. Bathymetrical data and seismic reflection profiles are used to understand the specific geomorphology of each site. X‐ray, thin sections and CT scan imagery combined with grain‐size, geochemical and mineralogical measurements on the cores allow characterization of the turbidites. Turbidites included in each cluster were produced by remobilization of surficial slope sediment, a process identified in very few studies worldwide. Three types of turbidites are distinguished and compared with deposits obtained in flume studies published in the literature. Type 1 is made of an ungraded clayey silt layer issued from a cohesive flow. Type 2 is composed of a partially graded clayey sand layer overlain by a mud cap, attributed to a transitional flow. Type 3 corresponds to a graded clayey sand layer overlain by a mud cap issued from a turbulence‐dominated flow. While the published experimental studies show that turbulence is damped by cohesion for low clay content, type 3 deposits of this study show evidence for a turbulence‐dominated mechanism despite their high clay content. This divergence may in part relate to input variables, such as water chemistry and clay mineralogy, that are not routinely considered in experimental studies. Furthermore, the large sedimentological variety observed in the turbidites from one coring site to another is related to the evolution of a sediment flow within a field‐scale basin made of a complex physiography that cannot be tackled by flume experiments.     

The infrared dielectric properties of maghemite, γ-Fe2O3, from reflectance measurement on pressed powders

The infrared complex permittivity functions of three varieties of maghemite, γ-Fe₂O₃, having different degrees of vacancy ordering, have been determined from their IR reflectance spectra, measured at near to normal incidence on pressed powder pellets. The optical constants therefrom obtained have been verified by using them in the simulation of the corresponding absorption spectra for KBr-diluted pellets, and these are in excellent agreement with the experimental spectra. All calculations are based on a procedure for the estimation of the effective dielectric function of a mixture, which incorporates percolation features, recently developed by the authors.     

A Compilation of Silicon,Rare Earth Element and Twenty‐One other Trace Element Concentrations in the Natural River Water Reference Material SLRS‐5 (NRC‐CNRC)

The natural river water certified reference material SLRS‐5 (NRC‐CNRC) was routinely analysed in this study for major and trace elements by ten French laboratories. Most of the measurements were made using ICP‐MS. Because no certified values are assigned by NRC‐CNRC for silicon and 35 trace element concentrations (rare earth elements, Ag, B, Bi, Cs, Ga, Ge, Li, Nb, P, Rb, Rh, Re, S, Sc, Sn, Th, Ti, Tl, W, Y and Zr), or for isotopic ratios, we provide a compilation of the concentrations and related uncertainties obtained by the participating laboratories. Strontium isotopic ratios are also given.     

Chemical and Isotopic Characteristics of the Kuroko‐Forming Volcanism

The Miocene northeast Honshu magmatic arc, Japan, formed at a terrestrial continental margin via a stage of spreading in a back‐arc basin (23–17 Ma) followed by multiple stages of submarine rifting (19–13 Ma). The Kuroko deposits formed during this period, with most forming during the youngest rifting stage. The mode of magma eruption changed from submarine basalt lava flows during back‐arc basin spreading to submarine bimodal basalt lava flows and abundant rhyolitic effusive rocks during the rifting stage. The basalts produced during the stage of back‐arc basin spreading are geochemically similar to mid‐ocean ridge basalt, with a depleted Sr–Nd mantle source, whereas those produced during the rifting stage possess arc signatures with an enriched mantle source. The Nb/Zr ratios of the volcanic rocks show an increase over time, indicating a temporal increase in the fertility of the source. The Nb/Zr ratios are similar in basalts and rhyolites from a given rift zone, whereas the Nd isotopic compositions of the rhyolites are less radiogenic than those of the basalts. These data suggest that the rhyolites were derived from a basaltic magma via crystal fractionation and crustal assimilation. The rhyolites associated with the Kuroko deposits are aphyric and have higher concentrations of incompatible elements than do post‐Kuroko quartz‐phyric rhyolites. These observations suggest that the aphyric rhyolite magma was derived from a relatively deep magma chamber with strong fractional crystallization. Almost all of the Kuroko deposits formed in close temporal relation to the aphyric rhyolite indicating a genetic link between the Kuroko deposits and highly differentiated rhyolitic magma.     

The Removal of Dissolved Metals by Hydroxysulphate Precipitates during Oxidation and Neutralization of Acid Mine Waters, Iberian Pyrite Belt

This study examines the removal of dissolved metals during the oxidation and neutralization of five acid mine drainage (AMD) waters from La Zarza, Lomero, Esperanza, Corta Atalaya and Poderosa mines (Iberian Pyrite Belt, Huelva, Spain). These waters were selected to cover the spectrum of pH (2.2–3.5) and chemical composition (e.g., 319–2,103 mg/L Fe; 2.85–33.3 g/L SO₄⁼) of the IPB mine waters. The experiments were conducted in the laboratory to simulate the geochemical evolution previously recognized in the field. This evolution includes two stages: (1) oxidation of dissolved Fe(II) followed by hydrolysis and precipitation of Fe(III), and (2) progressive pH increase during mixing with fresh waters. Fe(III) precipitates at pH < 3.5 (stages 1 and 2) in the form of schwertmannite, whereas Al precipitates during stage 2 at pH 5.0 in the form of several hydroxysulphates of variable composition (hydrobasaluminite, basaluminite, aluminite). During these stages, trace elements are totally or partially sorbed and/or coprecipitated at different rates depending basically on pH, as well as on the activity of the SO₄⁼ anion (which determines the speciation of metals). The general trend for the metals which are chiefly present as aqueous free cations (Pb²⁺, Zn²⁺, Cu²⁺, Cd²⁺, Mn²⁺, Co²⁺, Ni²⁺) is a progressive sorption at increasing pH. On the other hand, As and V (mainly present as anionic species) are completely scavenged during the oxidation stage at pH < 3.5. In waters with high activities (> 10⁻¹) of the SO ₄⁼ ion, some elements like Al, Zn, Cd, Pb and U can also form anionic bisulphate complexes and be significantly sorbed at pH < 5. The removal rates at pH 7.0 range from around 100% for As, V, Cu and U, and 60–80% for Pb, to less than 20% for Zn, Co, Ni and Mn. These processes of metal removal represent a significant mechanism of natural attenuation in the IPB.     

Geochronology of the Xihuashan Tungsten Deposit in Southeastern China: Constraints from Re–Os and U–Pb Dating

Xihuashan tungsten deposit is one of the earliest explored tungsten deposits in southeastern China. It is a vein type deposit genetically associated with the Xihuashan granite pluton. Here we report new dating and zircon geochemistry results. Re–Os isotopic dating for molybdenite intergrowth with wolframite in the oldest generation of the Xihuashan pluton yielded an isochron age of 157.0 ± 2.5 Ma (2σ). Zircon U–Pb laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) dating shows that the pluton crystallized at 155.7 ± 2.2 Ma (2σ). This age is similar to the molybdenite Re–Os age for the ore deposit within error. This, together with published data, suggests that the major W(Mo)‐Sn mineralization occurred between 160–150 Ma in southeastern China. These deposits constitute a major part of the magmatic‐metallogenic belt of eastern Nanlin. The lower Re content in molybdenite of the Xihuashan tungsten deposit shows crustal origin for the ore‐forming material. The limited direct contributions from the subducting slab for the tungsten mineralization in the Nanling region suggest a change of the style of the paleo‐Pacific plate beneath southeastern China.     

A Monte Carlo Model Of The Nocturnal Surface Temperatures In Urban Canyons

A model for the urban canyon is formulated for meteorologicalconditions of weak winds at night time. Thermal radiation, conductivity and convection are simulated by means of the Monte Carlo method. These are the main physical processesof energy transfer that give rise to the characteristic temperaturedistribution in these systems. The model has been satisfactory tested under ideal conditions for which analytical solutions exist.The predictions of the model under morerealistic conditions accurately reproduce the observationalresults. A strong temperature gradient across streets, with the canyon corners up to 4 °C warmer than the canyon centre, is found for the deepest canyons. This theoretical predictionhas been successfully verified with measurementstaken in a number of streets of the city of Granada in Spain.     

Estimating Buoyancy Heat Flux Using the Surface Renewal Technique over Four Amazonian Forest Sites in Brazil

The surface renewal (SR) method was applied for the first time to measurements of air temperature over four Amazonian forest sites and different seasons in order to obtain estimates of buoyancy heat flux. The required calibration of this method against eddy covariance resulted in a value for a specific parameter that is close to the range reported in other studies, contributing to the generalization of the SR method to different kinds of canopies. The comparison with fluxes obtained using the eddy covariance technique revealed a good match between the two methods for different sites, heights and seasons. Sites with high levels of non-stationarity in the signals of temperature and wind speed presented higher scatter in the regression with fluxes from eddy covariance. For a particular site with previously reported influence of low-frequency motions, the regression was only satisfactory, i.e., slope parameter close to unity and small offset, when oscillations with periods longer than $\approx $ ≈ 13 min were filtered out. The SR method has a great potential due to the simplicity of the instrumentation required. However, care should be taken when measuring under the influence of mesoscale motions, which can lead to high levels of non-stationarity, compromising the fundamental concepts of the SR theory.