Carbon costs and benefits of France’s biomass energy production targets

Background

Concern about climate change has motivated France to reduce its reliance on fossil fuel by setting targets for increased biomass-based renewable energy production. This study quantifies the carbon costs and benefits for the French forestry sector in meeting these targets. A forest growth and harvest simulator was developed for French forests using recent forest inventory data, and the wood-use chain was reconstructed from national wood product statistics. We then projected wood production, bioenergy production, and carbon balance for three realistic intensification scenarios and a business-as-usual scenario. These intensification scenarios targeted either overstocked, harvest-delayed or currently actively managed stands.

Results

All three intensification strategies produced 11.6–12.4 million tonnes of oil equivalent per year of wood-based energy by 2026, which corresponds to the target assigned to French wood-energy to meet the EU 2020 renewable energy target. Sustaining this level past 2026 will be challenging, let alone further increasing it. Although energy production targets can be reached, the management intensification required will degrade the near-term carbon balance of the forestry sector, compared to continuing present-day management. Even for the best-performing intensification strategy, i.e., reducing the harvest diameter of actively managed stands, the carbon benefits would only become apparent after 2040. The carbon balance of a strategy putting abandoned forests back into production would only break even by 2055; the carbon balance from increasing thinning in managed but untended stands would not break even within the studied time periods, i.e. 2015–2045 and 2046–2100. Owing to the temporal dynamics in the components of the carbon balance, i.e., the biomass stock in the forest, the carbon stock in wood products, and substitution benefits, the merit order of the examined strategies varies over time.

Conclusions

No single solution was found to improve the carbon balance of the forestry sector by 2040 in a way that also met energy targets. We therefore searched for the intensification scenario that produces energy at the lowest carbon cost. Reducing rotation time of actively managed stands is slightly more efficient than targeting harvest-delayed stands, but in both cases, each unit of energy produced has a carbon cost that only turns into a benefit between 2060 and 2080.

     

A framework for addressing the lack of diversity in the Geosciences through evaluating the current structure of institutional efforts

How can universities build institutional partnerships through supporting community geography projects? This paper details the case of university members seeking to achieve a community goal of expanding Geosciences education opportunities, while also targeting a long-range goal of improving diversity within the university Geosciences. Over the course of one year, two Ph.D students collaborated with community members affiliated with a local middle school to design and organize the School of Earth, Society, and Environment (SESE) Geosciences Camp for Middle School Girls, held in August 2019. This paper deconstructs and critiques the camp organizing process and its outcomes. The conclusion addresses what worked and what did not as a model for future attempts at more sustainable institutional partnerships serving community geography projects.

     

An ecosystem-based composite spatial model for floodplain vulnerability assessment: a case study of Artigas,Uruguay

Floods are natural processes that constitute a hazard to society when associated to improper land use. Anthropic activities in floodplains are a factor of vulnerability that converts a natural hazard into a threat factor, eventually leading to disaster. Nowadays, natural and social complex processes demand integrated assessments in order to improve their understanding, helping decision making over sustainable use of territory, as well as integrating society’s activity in ecosystems and potentials, restrictions and benefits that society obtain from them. In this context, the objective of this work was to build a composite vulnerability model for a floodplain under urban influence, using an integrated assessment approach. This model was based on three dimensions; threat, fragility and an ecosystem services provision. These dimensions were calculated using both primary and secondary information, and weights by specialists. Main results show that the area presents high vulnerability with an increasing gradient towards high and urbanized areas, associated with an important number and relevant ecosystem services. Also, a spatial heterogeneity of the three dimensions emerged, making evident this area’s complexity and the need of integrated assessments to approach it. The composite vulnerability model proposed presents an elevated potential for natural and social processes analysis in floodplains, which is crucial for these territory management. Moreover, these integrated dimensions could contribute to decision making in different levels, as well as generating important supplies for environmental management and land planning.

     

Social and environmental vulnerability in Southeast Brazil associated with the South Atlantic Convergence Zone

Natural Hazards - A landslide is a geomorphological hazard with significant ecological and economic damages. The present study aimed to identify landslide-prone areas in Farizi watershed via the...     

The P-y Response of Laterally Loaded Flexible Piles in Residual Soil

This paper describes the main features related to lateral displacements with depth after successive lateral loading–unloading cycles applied to the top of reinforced-concrete flexible bored piles embedded in naturally bonded residual soil. The bored piles under study have a cylindrical shape, with 0.40-m in diameter and 8.0-m in length. Both bored piles types (P1 and P2) include an embedded steel pipe section in their center as longitudinal steel reinforcements: pile type P1 has another 16 steel rods as steel reinforcement to concrete while pile type P2 has no further steel reinforcement. Pile type P1 has three times as much stiffness (EI) and four and a half times the plastic moment (M_y) than pile type P2. A similar load–displacement performance was observed at initial loads as for small displacements of both piles. At this initial loading stage, the response of the reinforced concrete piles is a function of the soil characteristics and of a linear elastic pile deformation. During this stage, piles can even be understood as probes for evaluating soil reactions. For larger horizontal displacements, after the concrete section starts undergoing large deformations, approaching the ultimate bending moment, pile behavior and consequently the load–displacement relation starts to diverge for both piles. For pile P1 the values of relevant lateral displacements are extended to about 2.5-m in depth, while for pile P2 lateral displacements are mostly constrained to about 2.0-m in depth. Measurements of horizontal displacements of pile P1 against depth recorded with a slope indicator show that, after unloading, lateral loads at distinct stages (small and near failure loads), exhibits a much higher elastic phase of the system response. An analytical fitting model of soil reaction is proposed based on the measured displacements from slope indicator. The integration of a continuous model proposed for the soil reaction agrees fairly well with the measured displacements up to moments close to plastic limit. Results of load–displacement show that the stiffer pile (P1) was able to mobilize twice as much lateral load compared to pile P2 for a service limit displacement of about 20 mm. The paper shows results that enable the isolation of the structural variable through real scale pile load tests, thus granting understanding of its importance and enabling its quantitative visualization in examples of piles embedded in residual soil sites.

     

Long-term monitoring of the behavior of a talus-colluvium deposit

Landslides - This article describes the behavior of a talus-colluvium deposit up to 70-m thick located in the Serra dos Orgaos, Rio de Janeiro/RJ, Brazil. The monitoring dataset of 13 years...     

Timing of Proterozoic magmatism in the Sunsas belt,Bolivian Precambrian Shield,SW Amazonian Craton

We present new U-Pb zircon and monazite ages from the Sunsas belt granitic magmatism in Bolivia,SW Amazonian Craton.The geochronological results revealed four major magmatic events recorded along the Sunsas belt domains.The older igneous event formed a granitic basement coeval to the Rio Apa Terrane(1.95-1.85 Ga)in the southern domain.The second magmatic episode is represented by 1.68 Ga granites associated to the Paraguá Terrane(1.69-1.66 Ga)in the northern domain.The 1.37-1.34 Ga granites related to San Ignacio orogeny represent the third and more pervasive magmatic event,recorded throughout the Sunsas belt.Moreover,magmatic ages of～1.42 Ga revealed that the granitogenesis asso-ciated to the Santa Helena orogeny also affected the Sunsas belt,indicating that it was not restricted to the Jauru Terrane.Lastly,the 1.10-1.04 Ga youngest magmatism was developed during the Sunsas oro-geny and represents the final magmatic evolution related to Rodinia assembly.Likewise,the 1.95-1.85 and 1.68 Ga inherited zircon cores obtained in the～1.3 Ga and 1.0 Ga granite samples suggest strong par-tial melting of the Paleoproterozoic sources.The 1079±14 Ma and 1018±6 Ma monazite crystallization ages can be correlated to the collisional tectono-thermal event of the Sunsas orogeny,associated to reac-tions of medium-to high-grade metamorphism.Thus,the Sunsas belt was built by heterogeneous 1.95-1.85 Ga and 1.68 Ga crustal fragments that were reworked at 1.37-1.34 Ga and 1.10-1.04 Ga related to orogenic collages.Furthermore,the 1.01 Ga monazite age suggests that granites previously dated by zir-con can bear evidence of a younger thermal history.Therefore,the geochronological evolution of the Sunsas belt may have been more complex than previously thought.     

The Cabo Frio upwelling overrides geographical patterns in the population dynamics of the shrimp Artemesia longinaris Spence Bate, 1888 (Decapoda: Penaeidae)

Upwelling areas are among the most productive ecosystems on the planet, influencing the biology of marine organisms. This study investigated the population dynamics of the shrimp Artemesia longinaris in two regions in southeastern Brazil, one inside (Macaé—Rio de Janeiro State) and one outside (Ubatuba—State of São Paulo) the Cabo Frio upwelling area. The aim was to verify the influence of the upwelling phenomenon on the abundance, growth, longevity, size of sexual maturity, and reproductive period of the species. In total, 188,902 individuals were captured at Macaé and 3,461 at Ubatuba. Individuals captured at Macaé showed larger maximum size, higher longevity, and slower growth rate, besides reaching sexual maturity at larger sizes than at Ubatuba. Continuous reproduction was observed in both regions, with juvenile recruitment peaks in spring and summer. Local conditions observed at Macaé were influenced by the Cabo Frio upwelling zone, characterized by productive and cooler waters that are around 20°C during most of the year. The upwelling phenomenon is probably the main factor influencing the population parameters studied here, changing the geographic patterns previously observed for the variation of these parameters in A. longinaris.     

Distribution patterns of interstitial polychaetes in sandy beaches of southern Brazil

This study describes the distribution patterns of interstitial polychaetes along morphodynamic gradients on six exposed sandy beaches in Santa Catarina and Paraná (South Brazil). Three random transects were sampled at two points on each beach, one at the swash and another at the surf zone, in winter and summer conditions. Six sediment replicates were collected at each sampling point using a corer of 4.6 cm internal diameter that removed 10 cm into the sediment. Abundance and composition of interstitial polychaete were correlated to wave height, slope, grain size, CaCO₃, chlorophyll a , omega indexes, temperature and relative tide range using a canonical correspondence analysis (CCA). A factorial ANOVA showed that taxa richness, mean density and Shannon's diversity were significantly higher at the reflective beaches, but average values differ significantly between transects and these differences change according to the beach zones on both sampling dates. PERMANOVA showed that polychaete associations differ among transects according to the beach zones. The composition of interstitial polychaete associations was significantly correlated to beach morphodynamics and features (P < 0.01). Polychaete associations of reflective beaches were more diverse than in other morphodynamic states. Intermediate beaches may also sustain diverse associations due to temporal variability of the morphodynamic patterns. Beaches presenting extreme dissipative morphodynamics and compacted sediments appear to be unfavourable for the occurrence of interstitial polychaetes.     

冲绳海槽轴线地质特征

冲绳海槽位于东海大陆架与琉球岛弧之间，海槽中发育着一系列平行轴向延伸的地堑型正断层。穿越海槽的地震剖面证实了海槽扩张中心的存在，扩张轴沿海槽轴线方向延伸。由于地堑构造中心的扩张速率较大，由某引起的海槽中心下陷的速率大于沉积作用的补偿速率，使海槽中心海底出现明显的下陷。在轴线的大陆坡一侧，陆源沉积占绝对优势；轴线的岛坡一侧，以火山坡碎屑、浮岩、有孔虫软泥为沉积特征。