Stability analysis of the 2007 Chehalis lake landslide based on long-range terrestrial photogrammetry and airborne LiDAR data

On December 4th 2007, a 3-Mm³ landslide occurred along the northwestern shore of Chehalis Lake. The initiation zone is located at the intersection of the main valley slope and the northern sidewall of a prominent gully. The slope failure caused a displacement wave that ran up to 38 m on the opposite shore of the lake. The landslide is temporally associated with a rain-on-snow meteorological event which is thought to have triggered it. This paper describes the Chehalis Lake landslide and presents a comparison of discontinuity orientation datasets obtained using three techniques: field measurements, terrestrial photogrammetric 3D models and an airborne LiDAR digital elevation model to describe the orientation and characteristics of the five discontinuity sets present. The discontinuity orientation data are used to perform kinematic, surface wedge limit equilibrium and three-dimensional distinct element analyses. The kinematic and surface wedge analyses suggest that the location of the slope failure (intersection of the valley slope and a gully wall) has facilitated the development of the unstable rock mass which initiated as a planar sliding failure. Results from the three-dimensional distinct element analyses suggest that the presence, orientation and high persistence of a discontinuity set dipping obliquely to the slope were critical to the development of the landslide and led to a failure mechanism dominated by planar sliding. The three-dimensional distinct element modelling also suggests that the presence of a steeply dipping discontinuity set striking perpendicular to the slope and associated with a fault exerted a significant control on the volume and extent of the failed rock mass but not on the overall stability of the slope.     

Trace element geochemistry of CR chondrite metal

We report trace element analyses by laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) of metal grains from nine different CR chondrites, distinguishing grains from chondrule interior (“interior grains”), chondrule surficial shells (“margin grains”), and the matrix (“isolated grains”). Save for a few anomalous grains, Ni‐normalized trace element patterns are similar for all three petrographic settings, with largely unfractionated refractory siderophile elements and depleted volatile Au, Cu, Ag, S. All three types of grains are interpreted to derive from a common precursor approximated by the least‐melted, fine‐grained objects in CR chondrites. This also excludes recondensation of metal vapor as the origin of the bulk of margin grains. The metal precursors were presumably formed by incomplete condensation, with evidence for high‐temperature isolation of refractory platinum‐group‐element (PGE)‐rich condensates before mixing with lower temperature PGE‐depleted condensates. The rounded shape of the Ni‐rich, interior grains shows that they were molten and that they equilibrated with silicates upon slow cooling (1–100 K h^?1), largely by oxidation/evaporation of Fe, hence their high Pd content, for example. We propose that Ni‐poorer, amoeboid margin grains, often included in the pyroxene‐rich periphery common to type I chondrules, result from less intense processing of a rim accreted onto the chondrule subsequent to the melting event recorded by the interior grains. This means either that there were two separate heating events, which formed olivine/interior grains and pyroxene/margin grains, respectively, between which dust was accreted around the chondrule, or that there was a single high‐temperature event, of which the chondrule margin records a late “quenching phase,” in which case dust accreted onto chondrules while they were molten. In the latter case, high dust concentrations in the chondrule‐forming region (at least three orders of magnitude above minimum mass solar nebula models) are indicated.     

Recovery of Bennu’s orientation for the OSIRIS-REx mission: implications for the spin state accuracy and geolocation errors

The goal of the OSIRIS-REx mission is to return a sample of asteroid material from near-Earth asteroid (101955) Bennu. The role of the navigation and flight dynamics team is critical for the spacecraft to execute a precisely planned sampling maneuver over a specifically selected landing site. In particular, the orientation of Bennu needs to be recovered with good accuracy during orbital operations to contribute as small an error as possible to the landing error budget. Although Bennu is well characterized from Earth-based radar observations, its orientation dynamics are not sufficiently known to exclude the presence of a small wobble. To better understand this contingency and evaluate how well the orientation can be recovered in the presence of a large 1\(^{\circ }\) wobble, we conduct a comprehensive simulation with the NASA GSFC GEODYN orbit determination and geodetic parameter estimation software. We describe the dynamic orientation modeling implemented in GEODYN in support of OSIRIS-REx operations and show how both altimetry and imagery data can be used as either undifferenced (landmark, direct altimetry) or differenced (image crossover, altimetry crossover) measurements. We find that these two different types of data contribute differently to the recovery of instrument pointing or planetary orientation. When upweighted, the absolute measurements help reduce the geolocation errors, despite poorer astrometric (inertial) performance. We find that with no wobble present, all the geolocation requirements are met. While the presence of a large wobble is detrimental, the recovery is still reliable thanks to the combined use of altimetry and imagery data.     

Cell responses to xenobiotics: comparison of MCF7 multi-drug- and mussel blood cell multi-xenobiotic-defense mechanisms

Multi-drug resistance (MDR) in MCF7 breast cancer cells and multi-xenobiotic resistance (MXR) in mussel (Mytilus edulis) blood cells (MBC) are well known mechanisms that contribute to the decrease in intracellular concentrations of many unrelated but cytotoxic compounds. In the present work, we have carried out comparative investigations of the MDR/MXR protective mechanisms using a rapid colorimetric assay for cell viability and calcein accumulation for MDR/MXR activities. These studies were performed using cultured MCF7 and MBC before and after in vitro exposure to xenobiotics. Our results indicate that a 5-day exposure to doxorubicin or vincristine decreased calcein accumulation in MBC which is consistent with an induction of multi-xenobiotic resistance. The increase in calcein accumulation provoked by 1-h treatment with 50 microM verapamil was much lower in MBC when compared to the P-glycoprotein overexpressing MCF7 cell line. We conclude that such microplate assays could be used in primary cultures of MBC to estimate the effects of various chemicals on MXR activity.     

The essential contribution of indigenous knowledge to understanding natural hazards and disaster risk: historical evidence from the Rwenzori (Uganda)

Natural Hazards - The integration of indigenous knowledge into understanding disasters from natural hazards is hitherto hampered by the limited conceptualization of the process that shapes...     

Microvertebrates from the Rhaetian basal bone bed of Saltford,near Bath,SW England

The famous Rhaetian bone bed (Late Triassic, 205 Ma) is well known because it marks a major switch in depositional environment from terrestrial red beds to fully marine conditions throughout the UK and much of Europe. The bone bed is generally cemented and less than 10 cm thick. However, we report here an unusual case from Saltford, near Bath, S.W. England where the bone bed is unconsolidated and up to nearly 1 m thick. The exposure of the basal beds of the Westbury Formation, Penarth Group includes a bone bed containing a diverse Rhaetian marine microvertebrate fauna dominated by sharks, actinopterygian fishes and reptiles. Despite the unusual sedimentary character of the bone bed, we find similar proportions of taxa as in other basal Rhaetian bone beds (55–59 % Lissodus teeth, 13–16 % Rhomphaiodon teeth, 12–14 % Severnichthys teeth, 6–9% Gyrolepis teeth, 3–4% undetermined sharks’ teeth, 1–3% undetermined bony fish teeth, and < 1% of each of Hybodus, Parascylloides, and Sargodon), the only differences being in the proportions of Rhomphaiodon teeth, which can represent 30–40 % of specimens elsewhere. This suggests that taphonomic bias of varying Rhaetian bone beds may be comparable despite different sedimentary settings, and that the proportions of taxa say something about their original proportions in the ecosystem.     

Toward an early warning system for dengue prevention: modeling climate impact on dengue transmission

Dengue fever is the most prevalent mosquito-borne viral disease of humans in tropical lands. As an efficient vaccine is not yet available, the only means to prevent epidemics is to control mosquito populations. These are influenced by human behavior and climatic conditions and thus, need constant effort and are very expansive. Examples of succeeded prevention are rare because of the continuous reintroduction of virus or vector from outside, or growing resistance of mosquito populations to insecticides. Climate variability and global warming are other factors which may favour epidemics of dengue. During a pilot study in Claris EC project, a model for the transmission of dengue was built, to serve as a tool for estimating the risk of epidemic transmission and eventually forecasting the risk under climatic change scenarios. An ultimate objective would be to use the model as an early warning system with meteorological forecasts as input, thus allowing better decision making and prevention.     

Pliensbachian magnetostratigraphy: new data from Paris Basin (France)

Sampling of an industrial drill string from the northeastern Paris Basin (Montcornet, France) provides early Jurassic magnetostratigraphic data coupled with biochronological control. About 375 paleomagnetic samples were obtained from a 145 m thick series of Pliensbachian rocks. A composite demagnetization thermal up to 300°C and an alternating field up to 80 mT were used to separate the magnetic components. A low unblocking temperature component (<250°C) with an inclination of about 64° is interpreted as a present-day field overprint. The characteristic remanent component with both normal and reversed antipodal directions was isolated between 5 and 50 mT. Twenty-nine polarity intervals were recognized. Correlation of these new results from the Paris Basin with data from the Breggia Gorge section (Ticino, southern Alps, Switzerland), which is generally considered as the reference section for Pliensbachian magnetostratigraphy, reveals almost identical patterns of magnetic polarity reversals. However, the correlation implies significant paleontological age discrepancies. Revised age assignments of biostratigraphic data of Breggia as well as an objective evaluation of the uncertainties on zonal boundaries in both Breggia and Moncornet resolve the initial discrepancies between magnetostratigraphic correlations and biostratigraphic ages. Hence, the sequence of magnetic reversals is significantly strengthened and the age calibration is notably improved for the Pliensbachian, a stage for which sections combining adequate magnetic signal and biostratigraphic constraints are still very few.     

Testing the genetic relationship between fluid alteration and brecciation in CM chondrites

Boriskino is a poorly studied CM chondrite with numerous millimeter‐ to centimeter‐scale clasts exhibiting sharp boundaries. Clast textures and mineralogies attest to diverse geological histories with various degrees of aqueous alteration. We conducted a petrographic, chemical, and isotopic study on each clast type of the breccia to investigate if there exists a genetic link between brecciation and aqueous alteration, and to determine the controlling parameter of the extent of alteration. Boriskino is dominated by CM2 clasts for which no specific petrographic type could be assigned based on the chemical compositions and modal abundances of constituents. One clast stands out and is identified as a CM1 lithology, owing to its lack of anhydrous silicates and its overall abundance of dolomite‐like carbonates and acicular iron sulfides. We observe that alteration phases near clast boundaries exhibit foliation features, suggesting that brecciation postdated aqueous alteration. We measured the O‐isotopic composition of Ca‐carbonates and dolomite‐like carbonates to determine their precipitation temperatures following the methodology of Verdier‐Paoletti et al. (2017). Both types of carbonates yield similar ranges of precipitation temperatures independent of clast lithology, ranging from ?13.9 ± 22.4 (2σ) to 166.5 ± 47.3 °C, precluding that temperature alone accounts for the differences between the CM1 and CM2 lithologies. Instead, we suggest that initial water/rock ratios of 0.75 and 0.61 for the CM1 and CM2 clasts, respectively, might control the extent of aqueous alteration. Based on these estimates, we suggest that Boriskino clasts originated from a single parent body with heterogeneous distribution of water either due to local differences in the material permeability or in the initial content of ice available. These conditions would have produced microenvironments with differing geochemical conditions thus leading to a range of degrees of aqueous alteration.