Relating remotely sensed forest damage data to wind data: storms Lothar (1999) and Vivian (1990) in Switzerland

This study compares the surface wind speed and forest damage data of two exceptionally severe winter storms, Vivian 1990 and Lothar 1999. The study area comprises the region that suffered damage in Switzerland. The wind speed data were derived from simulations of MeteoSwiss (Federal Office of Meteorology and Climatology), measurements during the storm periods and expert analyses of the data. The remotely sensed forest damage data were provided by the Federal Office for the Environment and the forest cover data by Swiss Federal Statistical Office. We compared data on the peak gust and maximum average wind speed, with data on the spatially related forest area and forest damage area, and found some clear differences in the correlations between the different wind data and forest damage. Our results point generally to the damage-causing role of near-surface gusts at maximum wind speeds during the storm. These tended to be spatially distributed on a fine scale. In only a few cases were the results statistically significant. However, these results could probably be improved with better wind data. For example, gust measurements spatially closer to forests or simulations of gusts at maximum wind speed could be produced with a spatially higher resolution.     

A Machine Learning Approach for Improving the Detection Capabilities at 3C Seismic Stations

We apply and evaluate a recent machine learning method for the automatic classification of seismic waveforms. The method relies on Dynamic Bayesian Networks (DBN) and supervised learning to improve the detection capabilities at 3C seismic stations. A time-frequency decomposition provides the basis for the required signal characteristics we need in order to derive the features defining typical “signal” and “noise” patterns. Each pattern class is modeled by a DBN, specifying the interrelationships of the derived features in the time-frequency plane. Subsequently, the models are trained using previously labeled segments of seismic data. The DBN models can now be compared against in order to determine the likelihood of new incoming seismic waveform segments to be either signal or noise. As the noise characteristics of seismic stations varies smoothly in time (seasonal variation as well as anthropogenic influence), we accommodate in our approach for a continuous adaptation of the DBN model that is associated with the noise class. Given the difficulty for obtaining a golden standard for real data (ground truth) the proof of concept and evaluation is shown by conducting experiments based on 3C seismic data from the International Monitoring Stations, BOSA and LPAZ.     

The Water Framework Directive: Can more information be extracted from groundwater data? A case study of Seewinkel,Burgenland, eastern Austria

Water protection is one of the most important goals in environmental protection. The Clean Water Act in the USA and the Water Framework Directive (WFD) in Europe are the legal frameworks to facilitate the achievement of this goal. The question is raised of whether more information can be extracted from WFD-related groundwater data. To answer it, a methodology has been developed that is easy to use and could be implemented into official practice. A case study is presented in which the groundwater data of a sodic area in Austria (Seewinkel) is assessed. Eighteen parameters in groundwater sampled from 23 wells (1991–2011) were analyzed. With basic statistics, trend-, cluster-, Wilks’ λ and spatial sampling density analysis, local phosphorus and boron phenomena were described, along with the determining role of sulphate, groundwater flow, and the oxygen gradient in the area. As a final step, the spatial sampling density was determined. Regarding the current set of parameters, all the sampling sites are necessary and only in the case of certain parameters (Ca²⁺, Mg²⁺, K⁺, NO₃ ^?, pH) could one sampling site be abandoned. The methodology applied brings a new perspective to exploring groundwater data collected according to the requirements of the WFD.     

An analysis of mixing in the frontal zone of South and North Atlantic Central Water off North-West Africa

Multi-parameter mixing analysis is applied to 26 stations of Auftrieb 75, a joint expedition of R.R.S. Discovery and FS Meteor. North Atlantic Central Water (NACW) and South Atlantic Central Water (SACW) are represented by two water types each, and phosphate, silicate and nitrate are all used as an additional parameter with temperature and salinity, yielding three sets of independent solutions. Solutions from different parameters show similar vertical distributions but can differ considerably in absolute terms. This is believed to be caused by insufficient knowledge of nutrient values of pure NACW and SACW and by low range/precision ratios of nutrient determination.It is shown that isopycnal mixing analysis correctly describes the water mass distribution to lowest order, i.e. there is agreement between results from isopycnal and multi-parameter analysis at most stations within the error bounds which are inherent in the method and which are presently very high. Significant non-isopycnal mixing could be confirmed for only one station, situated on the continental slope in the area of the undercurrent of the Canary Current upwelling regime, and may be caused by active upwelling, increased lateral and vertical shear in the under-current, or internal waves interacting with the bottom. Five stations do not yield oceanographically acceptable solutions, and an attempt is made to include a coastal water mass in the analysis in order to improve the result for these stations, i.e. three-parameter analysis for NACW and SACW is replaced by four-parameter analysis for NACW, SACW and coastal water by combining temperature and salinity with phosphate and silicate or with nitrate and silicate simultaneously (the combination phosphate and nitrate is degenerate because both nutrients are linearly correlated). This indeed improves the results, indicating the presence of coastal water at those stations, but accumulation of errors inhibits quantitative conclusions.     

A Comment on “How Well Can We Measure the Vertical Wind Speed? Implications for Fluxes of Energy and Mass” by Kochendorfer et al.

Kochendorfer et al. (Boundary-Layer Meterol, 145:383–398, 2012) conducted an experiment to evaluate azimuth and angle-of-attack dependent errors of sonic anemometer measurements. Several questions are raised regarding the experimental design and the presented results. The finding that instruments with non-orthogonal sonic paths underestimate fluctuations of vertical wind speed and consequently also scalar fluxes by about 10 % is compared with the results of a hitherto unpublished side-by-side field comparison and other past intercomparison experiments. Scale considerations are presented that raise considerable doubts on the validity of the implicit assumption of Kochendorfer et al. (2012) that the turbulent wind vector is highly correlated across a distance of 1.2 m at a height of 2.5 m over flat grassland, which corresponds to the separation between the sonic anemometers tested in their experiment. Nevertheless, new developments in sonic anemometer design to minimize transducer-shadow effects are desirable.     

Factors affecting the Nd3+ (REE3+) luminescence of minerals

In this paper, possibilities and limits of the application of REE³⁺ luminescence (especially the Nd^{3+ 4}F_3/2 → ⁴I_9/2 emission) as structural probe are evaluated. Important factors controlling the Nd³⁺ luminescence signal are discussed, including effects of the crystal-field, crystal orientation, structural state, and temperature. Particular attention was paid to the study of the accessory minerals zircon (ZrSiO₄), xenotime–(Y) (YPO₄), monazite–(Ce) (CePO₄) and their synthetic analogues. Based on these examples we review in short that (1) REE³⁺ luminescence can be used as non-destructive phase identification method, (2) the intensities of certain luminescence bands are strongly influenced by crystal orientation effects, and (3) increased widths of REE³⁺-related emission bands are a strong indicator for structural disorder. We discuss the potential of luminescence spectroscopy, complementary to Raman spectroscopy, for the quantitative estimation of chemical (and potentially also radiation-induced) disorder. For the latter, emissions of Nd³⁺-related centres are found to be promising candidates.     

Rapid Measurements of Solar Wind Ions with the Triana PlasMag Faraday Cup

The Triana PlasMag Faraday Cup (FC) will be able to determine speed, flow angles, temperature, and density of the main solar wind ion species with a time resolution of better than one second. Thus, the Triana PlasMag FC will enable resolution of spatial structures as small as a few hundred kilometers as the structures convect past the spacecraft. Under typical solar wind conditions, that size is comparable to a few proton gyroradii. This revised version was published online in July 2006 with corrections to the Cover Date.     

Sub-lethal effects of metal exposure: physiological and behavioural responses of the estuarine bivalve Macoma balthica

Variation in glycogen concentration, condition index (CI) and filtration activity were measured in the bivalve Macoma balthica buried in sediment and experimentally exposed to cadmium (Cd). The stress due to elevated but sub-lethal concentrations (300 ppb Cd) affected the overall fitness of the organism as all parameters monitored responded significantly. Lower concentrations tested (10, 30 and 100 ppb) only induced a significant decrease in filtration activity, which may play a protective role, enabling the organism to slow down its metabolic activity and preserving the integrity of its reserves (reflected by stable CI and glycogen levels). Hence, the various endpoints selected show different thresholds. Our results also demonstrate that under high exposure, small individuals loose proportionally more glycogen per unit of weight than larger ones, thus confirming the higher sensitivity of small individuals to metal contamination. Furthermore, exposure to intermediate concentration (30 ppb) seems to be beneficial to the small individuals as indicated by their high CI values compared to the control. These results showed thus that non-sigmoidal concentration-response relationship and sizes of individuals should be considered in monitoring programmes and risk assessment.     

Late Cretaceous reactivation of major crustal shear zones in northern Namibia: constraints from apatite fission track analysis

Namibia's passive continental margin records a long history of tectonic activity since the Proterozoic. The orogenic belt produced during the collision of the Congo and Kalahari Cratons in the Early Proterozoic led to a zone of crustal weakness, which became the preferred location for tectonism during the Phanerozoic. The Pan-African Damara mobile belt forms this intraplate boundary in Namibia and its tectonostratigraphic zones are defined by ductile shear zones, where the most prominent is described as the Omaruru Lineament–Waterberg Thrust (OML–WT). The prominance of the continental margin escarpment is diminished in the area of the Central and Northern Zone of the Damara belt where the shear zones are located. This area has been targeted with a set of 66 outcrop samples over a 550-km-long, 60-km-broad coast-parallel transect from the top of the escarpment in the south across the Damara sector to the Kamanjab Inlier in the north. Apatite fission track age and length data from all samples reveal a regionally consistent cooling event. Thermal histories derived by forward modelling bracket this phase of accelerated cooling in the Late Cretaceous. Maximum palaeotemperatures immediately prior to the onset of cooling range from ca. 120 to ca. 60 °C with the maximum occurring directly south of the Omaruru Lineament. Because different palaeotemperatures indicate different burial depth at a given time, the amount of denudation can be estimated and used to constrain vertical displacements of the continental crust. We interpret this cooling pattern as the geomorphic response to reactivation of basement structures caused by a change in spreading geometry in the South Atlantic and South West Indian Oceans.