Coastal upwelling systems and Eastern boundary currents: A review of terminology

The use of terms such as Benguela Current or Peru Current System for different features of the oceanic circulation in the eastern parts of the oceans is reviewed. During 50 years of upwelling research these terms have been used for different oceanographic phenomena. It is argued that one reason for inconsistent use has been that names of currents were chosen on geographic rather than hydrodynamic principles, and that although knowledge of the dynamics of current systems expanded, it became increasingly difficult to modify the existing nomenclature accordingly. In order to provide a basis for a unified terminology, the dynamics of ocean currents in the eastern pans of the oceans are reviewed. It is argued that the coastal upwelling current system is a modification of the inshore part of the eastern boundary current and consequently should not be named as opposed to it but as part of it. It is suggested that the traditional geographic names be used for the eastern boundary currents and new names be assigned by international agreement to the coastal upwelling currents.     

Stabilität einer Rutschscholle unter Einstau

ZusammenfassungStabilität einer Rutschscholle unter Einstau Die Elta, linker Seitenzufluß der Donau auf der Höhe Tuttlingen, sollte an der topografisch günstigsten Stelle zur Errichtung eines 12 Mio m³ großen Speichers abgesperrt werden. Die geologische Vorerkundung ergab Hinweise auf eine erfolgte Rutschung größerer Kubatur im linken Hangbereich. Die danach angesetzte Erkundung zeigte, daß eine Scholle aus Gesteinen des Weißen Jura unter Ausbildung einer Gleitfläche auf dem unterlagernden Braunen Jura abgeglitten war. Mit dem Teileinstau dieser Hangpartie mußte befürchtet werden, daß die Scholle erneut in Bewegung geraten und in das Becken gleiten würde (Vergleichssituation zu Vajont). Die bodenmechanische Berechnung ergab für den Lastfall der schnellen Senkung des Beckenspiegels eine nicht ausreichende Standsicherheit der Scholle, weshalb die Sperrstelle aufgegeben werden mußte.

---

SummaryStability of a Rock Slide in a Reservoir The Elta, left tributory river of the upper Danube should have been dammed up at the topographically most suitable location in order to erect a reservoir for water supply of 12 mio. m³ in volume. Since the topography of the valley part in consideration showed some peculiarities, a more detailed geological survey was undertaken. Due to geo-morphological aspects on the left slope part of the valley expecially in the area of the dam abutment in prospection a former landslide was indicated. More detailed ascertainments showed that a stratum of malm had performed a slideway on the dogger yielding the actual morphological position.In projecting the basin it had to be taken into consideration the possibility of a renewed sliding expecially in the state of lowering the water table (comparative situation to Vajont).Indeed the soil mechanical safety determination of the slope part in consideration verified a not sufficient stability in the state of repeated sudden drow down of the water table in the basin. Due to this result one had to renounce on the realization of the project.

---

RésuméStabilité d'un éboulement dans un bassin On devait construire un barrage sur la Elta (affluent gauche du Danube, à la hauteur de Tuttlingen), à l'endroit le plus favorable du point de vue topographique, afin de créer un réservoir de 12 Mio. m³. Le sondage géologique préalable a fourni des indications au sujet d'un glissement de cubage assez important, s'étant produit dans la région pentue gauche.Le sondage effectué par la suite montra qu'une masse de pierres du Jura Blanc s'était détachée en ferment une surface glissante sur le Jura Brun qui se trouve à la base. Avec le remplissage du bassin partiel il était à craindre que la masse ne se mît de nouveau en mouvement et ne glissât dans le bassin (Situation comparable à Vajont).Les calculs de la mécanique du sol n'ont pas révélé une sécurité suffisant de la stabilité de la masse, dans le cas d'une baisse rapide du niveau du bassin, c'est pourquoi on a dû renoncer à un barrage à cet endroit.

---

---

Mit 8 Abbildungen     

Geochemical study on a well in the Western Canada Basin: relation of the aromatic distribution pattern to maturity of organic matter

Thirty-one rock samples from a Western Canada Basin well have been analysed for aromatics, using glass capillary gas chromatography with simultaneous flame ionization and sulfur-selective flame photometric detection. A uniform aromatic distribution pattern with a marked predominance of di- and tricyclic aromatic hydrocarbons was observed throughout a depth interval of 3000 meters comprising Cretaceous and Jurassic sediments. The very high relative abundance of sulfur aromatics at two narrow intervals in the Triassic and Mississippian is attributed to a major change in facies. Gradual changes with increasing depth have been observed for a series of compound ratios, which had been calculated from the isomers of methyl- and dimethylphenanthrene, and their parent compounds. These changes reflect the increasing thermal maturation of the sedimentary organic matter. A Methylphenanthrene Index (MPI) has been introduced, which exhibited a very good correlation with vitrinite reflectance data. The MPI is the first maturity parameter which is based on a series of aromatic hydrocarbons. This hydrocarbon internal maturity parameter permits the recognition and definition of maturity levels in extracts which can be compared to the maturity (e.g. vitrinite reflectance) of source rocks.     

Ammoniten-Ökologie am Beispiel des Oberjura

Zusammenfassung In vielen Fällen beeinflussen äußere Faktoren das Vorkommen der Ammoniten. Im Oberjura spielt die Wassertiefe eine große Rolle, daneben tritt die Wassertemperatur. Voraussetzungen der ökologischen Analyse sind bodenbezogenes Leben der Tiere und postmortale Autochthonie der Schalen. Methoden und Fehlerquellen werden besprochen. Aus der ökologischen Bindung vieler Ammoniten ergeben sich Folgen, vor allem für Stratigraphie, Phylogenie und Ontogenie.

---

In many cases external factors determine the occurence of the ammonites. In the Upper Jurassic the depth of the sea is of great importance, as well as the temperature of the water. Ecological analysis requires life of the animals close to the sea floor, and that the shells are autochthonous.Methods and sources of errors are discussed. The dependence on environment of many ammonites has consequences, especially for stratigraphy, phylogeny and ontogeny.

---

Résumé Souvent des facteurs extérieurs déterminent la présence des ammonites. Dans le Jurassique Supérieur la profondeur de la mer joue un grand rôle, aussi bien que la température de l'eau. L'analyse écologique doit supposer que les animaux vivent près du fond de la mer et que les coquilles sont autochtones. Les méthodes et les sources d'erreurs sont discutées. La dépendance des ammonites de leur milieu a des conséquences avant tout pour la stratigraphie, la phylogénie et l'ontogénie.

---

, . , . .

     

Die Reaktion 2 Zoisit+1 CO2 ⇌ 3 Anorthit+1 Calcit+1 H2O

The equilibrium conditions of the following reaction 2 zoisite +1 CO₂?3 anorthite+1 calcite+1 H₂O 2 Ca₂Al₃[O/OH/SiO₄/Si₂O₇]+1 CO₂?3 CaAl₂Si₂O₈+1 CaCO₃+1 H₂O have been determined experimentally at total pressures of P _j= 2000 bars, P _f =5000 bars, and P _f =7000 bars. Owing to the vertical position of the equilibrium curves in isobaric T- \(X_{{\text{CO}}_{\text{2}} }\) diagrams, the composition of the binary H₂O-CO₂ fluid phase coexisting with zoisite is independent of temperature in the temperature interval investigated. According to our experiments, orthorhombic zoisite is only stable in equilibrium with a fluid phase at a concentration of CO₂ which is less than, respectively, ca. 2 Mol% CO₂ at P _f =2000 bars, ea. 6 Mol% at P _f =5000 bars, and ca. 10 Mol% at P _f =7000 bars. Thus, the fluid phase coexisting with zoisite is rich in H₂O. While this is independent of temperature the experimental data demonstrate that the influence of pressure cannot be neglected: With increasing pressure the concentration of CO₂ of the fluid phase coexisting with zoisite can rise a little. The position of the reaction studied, which is independent of temperature and exhibits small values of \(X_{{\text{CO}}_{\text{2}} }\) ,leads to two important petrogenetic conclusions:

1. The occurrence of zoisite is an indicator for a CO₂-poor and H₂O-rich fluid composition during metamorphism of marly calcsilicates.
2. If the concentration of CO₂ of the fluid phase coexisting with zoisite exceeds the equilibrium value of \(X_{{\text{CO}}_{\text{2}} }\) calcite+anorthite+H₂O is formed from zoisite+CO₂. Thus, a considerable increase in the anorthite-content of plagioelase is possible.

     

Aerial perspective for shaded relief

ABSTRACT

Aerial perspective is an essential design principle for shaded relief that emphasizes high elevation terrain using strong luminance contrast and low elevations with low contrast. Aerial perspective results in a more expressive shaded relief and helps the reader to understand the structure of a landscape more easily. We introduce a simple yet effective method for adding aerial perspective to shaded relief that is easy to control by the mapmaker.     

Terrain generalization with line integral convolution

ABSTRACT

Line integral convolution is a technique originally developed for visualizing vector fields, such as wind or water directions, that places densely packed lines following the direction of movement. Geisthövel and Hurni adapted line integral convolution to terrain generalization in 2018. Their method successfully removes details and retains sharp mountain ridges; it is particularly suited for creating generalized shaded relief. This paper extends line integral convolution generalization with a series of enhancements to reduce spurious artifacts, accentuate mountain ridges, control the level of detail in mountain slopes, and preserve sharp transitions to flat areas. The enhanced line integral convolution generalization effectively removes excessive terrain details without changing the position of terrain features. Sharp mountain ridgelines are accentuated, and transitions to flat waterbodies and valley bottoms are preserved. Shaded relief imagery derived from generalized elevation models is visually pleasing and resembles manually produced shaded relief.     

Neoproterozoic to Early-Palaeozoic magmatic evolution in the Gondwana-derived Austroalpine basement to the south of the Tauern Window (Eastern Alps)

In the Austroalpine Basement to the south of the Tauern Window, distinct suites of metabasites occur with orthogneisses in pre-Early-Ordovician units. Tholeiitic and alkaline within-plate basalt-type metabasites are associated with acid meta-porphyroids in the post-Early-Ordovician Thurntaler Phyllite Group. According to their correlated trace element abundances, metabasite zircons crystallized with their host rocks. Protolith Pb–Pb zircon ages, whole-rock Ta/Yb–Th/Yb and oxygen, Sr, Nd isotope data define two principal evolution lines. An older evolution at elevated Th/Yb typical of subduction-related magmatism, started by 590-Ma N-MORB-type and 550–530 Ma volcanic arc basalt type basic suites, which mainly involved depleted mantle sources. It finished with mainly crustal-source 470–450-Ma acid magmatites. An other evolution line by tholeiitic and 430-Ma alkaline within-plate basalt-type suites in both pre- and post-Early-Ordovician units is characterized by an intraplate mantle metasomatism and enrichment trend along multicomponent sources. These magmatic evolution lines can be related to a plate tectonic scenario that involved terranes in a progressively mature Neoproterozoic to Ordovician active margin, and a subsequent Palaeo-Tethys passive margin along the north Gondwanan periphery.     

Combining field and modelling techniques to assess rockfall dynamics on a protection forest hillslope in the European Alps

Adequate management of a mountain forest that protects downslope areas against impacts of rockfall requires insight into the dynamics of the hillslope environment. Therefore, we applied a combined approach, using field and modelling techniques, to assess the determining factors for rockfall source areas, rockfall tracks and rockfall runout zones on a forested slope in mountainous terrain. The first objective of this study was to understand why rockfall occurs in the study area. The second objective was to translate the knowledge obtained in the field into a model that simulates rockfall dynamics on a forested slope realistically. The third objective was to assess which hillslope characteristics primarily determine the distribution of active rockfall tracks. To achieve these objectives, we made a geomorphological map of the whole study area, and we measured the major discontinuity planes in the bedrock that are exposed in the rockfall source areas. Furthermore, a test site for simulation modelling within the larger study area was defined in which both a forest and a hillslope inventory were carried out. The available data and our developed rockfall simulation model allowed us to assess the slope characteristics that mainly determine the distribution of areas affected by rockfall. We found that in decreasing order of importance, both standing and felled trees, the surface roughness and rockfall resistant shrubs primarily determine the distribution of rockfall-affected areas. Simulation tests without a forest cover produced similar rockfall runout zones as fossil rockfall events identified in the field. We believe that the combined field and modelling approach is a prerequisite for understanding how forests can protect against rockfall.     

Quasi-static and Quasi-dynamic Modeling of Earthquake Failure at Intermediate Scales

We present a model for earthquake failure at intermediate scales (space: 100 m–100 km, time: 100 m/v _shear- 1000’s of years). The model consists of a segmented strike–slip fault embedded in a 3-D elastic solid as in the framework of Ben-Zion and Rice (1993). The model dynamics is governed by realistic boundary conditions consisting of constant velocity motion of the regions around the fault, static/kinetic friction laws with possible gradual healing, and stress transfer based on the solution of Chinnery (1963) for static dislocations in an elastic half-space. As a new ingredient, we approximate the dynamic rupture on a continuous time scale using a finite stress propagation velocity (quasi–dynamic model) instead of instantaneous stress transfer (quasi–static model). We compare the quasi–dynamic model with the quasi–static version and its mean field approximation, and discuss the conditions for the occurrence of frequency-size statistics of the Gutenberg–Richter type, the characteristic earthquake type, and the possibility of a spontaneous mode switching from one distribution to the other. We find that the ability of the system to undergo a spontaneous mode switching depends on the range of stress transfer interaction, the cell size, and the level of strength heterogeneities. We also introduce time-dependent log (t) healing and show that the results can be interpreted in the phase diagram framework. To have a flexible computational environment, we have implemented the model in a modular C++ class library.