The Bengal Fan: Some preliminary results from ODP drilling

Three deep holes, with a maximum penetration of 960 m below sea floor, were drilled into the distal Bengal Fan just south of the equator during ODP Leg 116. The entire section recovered is dominated by sandy silt and mud turbidites derived from the Ganges Delta and from the continental margin of the western Bay of Bengal, interbedded with thin pelagic clays and with biogenic turbidites probably from a local sea mount source. The effects of Hi-Malayan uplift, sea level fluctuations, local tectonics, and fan channel/lobe processes have closely interacted to produce the observed sedimentary record of the past 17 million years since the early Miocene.Coauthors include: James R. Cochran, Lamont-Doherty Geological Observatory (Co-chief scientist); Dorrik A. V. Stow, Nottingham University, England (Co-chief scientist); Christian A. Auroux, Texas A & M University, USA (ODP staff scientist); Kazou Amano, Ibaraki University, Japan; Peter S. Balson, British Geological Survey, Keyworth, Notts, England; Jacques Boulegue, Pierre & Marie Curie University, Paris, France; Garrett W. Brass, University of Miami, Florida, USA; Jeffrey Corrigan, University of Texas, Austin, USA; Stefan Gartner, Texas A & M University, USA; Stuart A. Hall, University of Houston, Texas, USA; Silvia Iaccarino, University of Parma, Italy; Toshio Ishizuka, University of Tokyo, Japan; trena Kacmarska, Mount Allison University, New Brunswick, Canada; Heidemarie Kassens, Kiel University, West Germany; Gregory Leger, Dalhousie University, Halifax, Nova Scotia, Canada; Franca Proto Decima, University of Padova, Italy; C. V. Raman, Andhra University, Visakhapatnam, India; William W. Sager, Texas A & M University, USA; Kozo Takahashi, Woods Hole Oceanographic Institution, USA; Thomas Thompson, 580 Euclid Ave, Boulder, Colo, USA; Jean-Jacques Tiercelin, University of Bretagne, Brest, France; Mark Townsend, University of Nottingham, England; Andreas Wetzel, Tubingen University, West Germany; N. P. Wijayananda, National Aquatatic Resource Agency, Colombo, Sri Lanka; and Colin Williams, Lamont-Doherty Geological Observatory.     

Simplified method of deep-tow seismic profiling

To improve resolution of seismic-reflection profiles in continental slope water depths of 900 to 1500 m, a single hydrophone was towed about 150 m off the bottom to receive reflected signals from a surface-towed sparker sound source. That deep-towed hydrophone data show that valleys which appear V-shaped in records from a surface-towed hydrophone are flat-bottomed, and that subbottom reflections from an erosional unconformity can be much better resolved. The data produced by this technique are very hepful when used in conjunction with records from conventional surface-towed seismic-profiling equipment.     

Incorporation,distribution and fate of saturated petroleum hydrocarbons in sediments from a controlled marine ecosystem

A simulation of a chronic input of petroleum into an estuarine environment was investigated using the facilities at the Marine Ecosystems Research Laboratory at the University of Rhode Island. An oil-water dispersion of No. 2 fuel oil was added to the system (twice weekly for 24 weeks) and the saturated hydrocarbons from this oil were measured in suspended material and sediments. After the initial chronic oil addition, trace amounts of hydrocarbons were detected in the sediments within two weeks, but substantial accumulation was not detected for approximately 135 days. The oil appeared to enter the sediment via the suspended material, with most of the saturated hydrocarbons associated with smaller size sediment particles (< 45 μm to > 0·3 μm). With time, the fuel oil saturated hydrocarbons in the sediments were mixed to a depth of 3 to 4 cm. Although only 12% of the total saturated hydrocarbons added to the system were found in the sediments, these hydrocarbons appear to be relatively stable and were still detectable in these sediments for at least six months after the last oil addition.     

Rational approximations in the parabolic equation method for water waves

Approximations based on minimax principles are developed in order to allow for large-angle propagation in the parabolic equation method. Numerical studies show that the minimax approximations do not cause any significant degradation of accuracy at small angles of incidence when compared with an existing model based on a (1,1) Padé approximant, and that they allow for much more successful treatment of large angles of incidence than is possible using the previously available methods.     

Tracking the last sea-level cycle: seafloor morphology and shallow stratigraphy of the latest Quaternary New Jersey middle continental shelf

Seafloor geomorphology and surficial stratigraphy of the New Jersey middle continental shelf provide a detailed record of sea-level change during the last advance and retreat of the Laurentide ice sheet (120 kyr B.P. to Present). A NW–SE-oriented corridor on the middle shelf between water depths of 40 m (the mid-shelf “paleo-shore”) and 100 m (the Franklin “paleo-shore”) encompasses 500 line-km of 2D Huntec boomer profiles (500–3500 Hz), an embedded 4.6 km² 3D volume, and a 490 km² swath bathymetry map. We use these data to develop a relative stratigraphy. Core samples from published studies also provide some chronological and sedimentological constraints on the upper <5 m of the stratigraphic succession.The following stratigraphic units and surfaces occur (from bottom to top): (1) “R”, a high-amplitude reflection that separates sediment >46.5 kyr old (by AMS ¹⁴C dating) from overlying sediment wedges; (2) the outer shelf wedge, a marine unit up to 50 m thick that onlaps “R”; (3) “Channels”, a reflection sub-parallel to the seafloor that incises “R”, and appears as a dendritic system of channels in map view; (4) “Channels” fill, the upper portion of which is sampled and known to represent deepening-upward marine sediments 12.3 kyr in age; (5) the “T” horizon, a seismically discontinuous surface that caps “Channels” fill; (6) oblique ridge deposits, coarse-grained shelly units comprised of km-scale, shallow shelf bedforms; and (7) ribbon-floored swales, bathymetric depressions parallel to modern shelf currents that truncate the oblique ridges and cut into surficial deposits.We interpret this succession of features in light of a global eustatic sea-level curve and the consequent migration of the coastline across the middle shelf during the last 120 kyr. The morphology of the New Jersey middle shelf shows a discrete sequence of stratigraphic elements, and reflects the pulsed episodicity of the last sea-level cycle. “R” is a complicated marine/non-marine erosional surface formed during the last regression, while the outer shelf wedge represents a shelf wedge emplaced during a minor glacial retreat before maximum Wisconsin lowstand (i.e., marine oxygen isotope stage 3.1). “Channels” is a widespread fluvial subarial erosion surface formed at the late Wisconsin glacial maximum 22 kyr B.P. The shoreline migrated back across the mid-shelf corridor non-uniformly during the period represented by “Channels” fill. Oblique ridges are relict features on the New Jersey middle shelf, while the ribbon-floored swales represent modern shelf erosion. There is no systematic relationship between modern seafloor morphology and the very shallowly buried stratigraphic succession.     

The reliability of analytical data for tributyltin (TBT) in sea water and its implications on water quality criteria

To investigate the reliability of analytical data for tributyltin (TBT) in sea water, split water samples were distributed to ten laboratories in six countries. The sub-surface samples comprised: (i) an offshore (0·5 km) water sample, (ii) the same sample but spiked with an undisclosed quantity of TBT standard compound (175 ng TBT⁺ liter⁻¹), and (iii) a sample taken from a yacht marina. The seven acceptable data sets were in good agreement for the spiked sample (178 ± 26 ng TBT⁺ liter⁻¹) but showed a greater variation in concentrations reported for the yacht marina sample (366 ± 93 ng TBT⁺ liter⁻¹). Atomic absorption and gas chromatographic-flame photometric detection techniques produced results of similar accuracy and precision. Samples acidified with 1 ml of 10% (v/v) acetic acid appeared stable for more than 2 weeks when stored refrigerated and in darkness. Analyses of the offshore seawater sample revealed TBT contamination (9 ± 7 ng TBT⁺ liter⁻¹) indicating dispersion of the compound to the shelf waters off Monaco. The spread in values reported by the laboratories demonstrates inherent difficulties in obtaining good precision below approximately 20 ng TBT⁺ liter⁻¹. This observation is discussed with respect to the setting and enforcing of water quality standards.     

Thermodynamic characterization of the partitioning of iron between soluble and colloidal species in the Atlantic Ocean

Recent electrochemical measurements have shown that iron (Fe) speciation in seawater is dominated by complexation with strong organic ligands throughout the water column and have provided important thermodynamic information about these compounds. Independent work has shown that iron exists in both soluble and colloidal fractions in the Atlantic Ocean. Here we have combined these approaches in samples collected from a variety of regimes within the Atlantic Ocean. We measured the partitioning of Fe between soluble (< 0.02 μm) and colloidal (0.02 to 0.4 μm) size classes and characterized the concentrations and conditional stability constants of Fe ligands within these size classes. Results suggest that equilibrium partitioning of Fe between soluble and colloidal ligands is partially responsible for the distribution of Fe between soluble and colloidal size classes. However, a significant fraction of the colloidal Fe was inert to ligand exchange as soluble Fe concentrations were generally lower than values predicted by a simple equilibrium partitioning model.In surface waters, strong ligands with conditional stability constants of 10¹³ relative to total inorganic Fe appeared to dominate speciation in both the soluble and colloidal fractions. In deep waters these ligands were absent, and instead we found ligands with stability constants 12–15 fold smaller that were predominantly in the soluble pool. Nevertheless, significant levels of colloidal Fe were found in these samples, which we inferred must be inert to coordination exchange.     

Emerging fisheries,emerging fishery interactions with sea turtles: A case study of the large-mesh gillnet fishery for flounder in Pamlico Sound,North Carolina,USA

Emerging fisheries and changes in fishery practices are not always readily apparent, nor are their impacts on non-target species such as seabirds, sea turtles, and marine mammals. Data from several different sources led managers to discover high rates of sea turtle bycatch in an inshore large-mesh gillnet fishery in North Carolina, USA, particularly the emerging deep-water gillnet fishery. This paper reviews the history of how increased numbers of observed stranded sea turtles in 1999 led to the discovery that turtles were becoming entangled in the large-mesh gillnet fishery in Pamlico Sound, North Carolina. It also demonstrates how a variety of data sets from fisheries observers, aerial surveys, and fisheries statistics programs contributed to shaping management of the large-mesh gillnet fishery in Pamlico Sound to decrease turtle bycatch and now point towards the need of additional assessment of gillnet bycatch in other parts of North Carolina. Finally, potential approaches are discussed for a more timely detection of future fishery conflicts and development of a plan to reduce otherwise inevitable bycatch and disruptions to fishing effort.     

The Regional Ocean Modeling System (ROMS) 4-dimensional variational data assimilation systems: Part II - Performance and application to the California Current System

The Regional Ocean Modeling System (ROMS) 4-dimensional variational (4D-Var) data assimilation systems have been systematically applied to the mesoscale circulation environment of the California Current to demonstrate the performance and practical utility of the various components of ROMS 4D-Var. In particular, we present a comparison of three approaches to 4D-Var, namely: the primal formulation of the incremental strong constraint approach; the dual formulation “physical-space statistical analysis system”; and the dual formulation indirect representer approach. In agreement with theoretical considerations all three approaches converge to the same ocean circulation estimate when using the same observations and prior information. However, the rate of convergence of the dual formulation was found to be inferior to that of the primal formulation. Other aspects of the 4D-Var performance that relate to the use of multiple outer-loops, preconditioning, and the weak constraint are also explored. A systematic evaluation of the impact of the various components of the 4D-Var control vector (i.e. the initial conditions, surface forcing and open boundary conditions) is also presented. It is shown that correcting for uncertainties in the model initial conditions exerts the largest influence on the ability of the model to fit the available observations. Various important diagnostics of 4D-Var are also examined, including estimates of the posterior error, the information content of the observation array, and innovation-based consistency checks on the prior error assumptions. Using these diagnostic tools, we find that more than 90% of the observations assimilated into the model provide redundant information. This is a symptom of the large percentage of satellite data that are used and to some extent the nature of the data processing employed. This is the second in a series of three papers describing the ROMS 4D-Var systems.