Precise Positioning of Ocean Bottom Seismometer by Using Acoustic Transponder and CTD

We have obtained precise estimates of the position of Ocean Bottom Seismometers (OBS) on the sea bottom. Such estimates are usually uncertain due to their free falling deployment. This uncertainty is small enough, or is correctable, with OBS spacing of more than 10 km usually employed in crustal studies. But, for example, if the spacing is only 200 m for OBS reflection studies, estimates of the position with an accuracy of the order of 10 m or more is required.The determination was carried out with the slant range data, ship position data and a 1D acoustic velocity structure calculated from Conductivity–Temperature–Depth (CTD) data, if they are available. The slant range data were obtained by an acoustic transponder system designed for the sinker releasing of the OBS or travel time data of direct water wave arrivals by airgun shooting. The ship position data was obtained by a single GPS or DGPS. The method of calculation was similar to those used for earthquake hypocenter determination.The results indicate that the accuracy of determined OBS positions is enough for present OBS experiments, which becomes order of 1 m by using the DGPS and of less than 10 m by using the single GPS, if we measure the distance from several positions at the sea surface by using a transponder system which is not designed for the precise ranging. The geometry of calling positions is most important to determine the OBS position, even if we use the data with larger error, such as the direct water wave arrival data. The 1D acoustic velocity structure should be required for the correct depth of the OBS. Although it is rare that we use a CTD, even an empirical velocity structure works well.     

The idea of nature in the east in comparison with the west

Conclusion — Contemporary Implications According to Buddhist philosophy, men constitute just one class of living beings. As such, they have no right to unlimited use of natural resources. Also men have no right to unlimited exploitation of animal and plant life, which forms part of Nature. Until recently, Westerners or moderns tended to think that men were quite separate and different from the natural world. This assumption is ungrounded and unreasonable. It has brought about devastation. Men incur retaliation by nature.In order to deal with the difficult situation that has come about, we must seek a solution that is both objective and subjective. On the objective side, we must discard the arrogance of supposing that men are entitled to exploit the natural world at their own will, without limit and regardless of the consequences. It is not appropriate to maintain the idea of conquering nature. Nature should be met with affection. In this connection, we emphasize that the world of nature should not be monopolized by a few countries. The whole natural world should be shared by all mankind. We cannot but feel angry at the small, limited number of countries which totally control the reserves of a limited energy supply, and which are extravagantly wasting what nature has entrusted to them. Just as individual egoism must be curtailed and placed under control, so national and ethnic egoism also should be restrained in the name of justice and respect for nature.On the subjective side, there is need for correction of the opinion of moderns that the progress of mankind consists in the unlimited satisfaction of human desire for material objects. Buddhism taught satisfaction with what is given to men. To know being satisfied was thought to be the way to spiritual happiness. The key to the relationship between man and the environment may very well lie in the control of our desires according to this concept of satisfaction. For that purpose our desire should be scaled to the possibilities of nature conceived as supporting human existence. Nature is not an entity to confront us as if it were quite different from us; it is something to embrace, as we might think it as that from which we cannot separate ourselves. Admitting the disinction between man and nature, we have to think how to live with the knowledge that nature is necessary to us.     

Oxygen isotopic distribution in an amoeboid olivine aggregate from the Allende CV chondrite: Primary and secondary processes

The oxygen isotopic distribution in an amoeboid olivine aggregate (AOA), TTA1-02, from the Allende CV3 chondrite has been determined by secondary ion mass spectrometry. The irregular shaped TTA1- 02 (5×3mm) consists mostly of olivine grains of ca. 5μm in diameter. Olivine grains of Mg-rich (Fo₉₅) and Fe-rich (Fo₆₀) composition are in direct contact with each other, with a sharp compositional boundary. Oxygen isotopic compositions of Fe-rich olivine grains are ¹⁶O-poor (Δ¹⁷O ≅ −5‰), whereas Mg-rich olivine is ¹⁶O-rich (Δ¹⁷O ≅ −25‰). Several Al-rich inclusions (<ca. 500 μm in diameter) are enclosed by olivine grains in the AOA. Oxygen isotopic compositions of spinel and fassaite in Al-rich inclusions are ¹⁶O-rich (Δ¹⁷O ≅ −20‰), whereas those of anorthite, nepheline and phyllosilicate are ¹⁶O-poor (Δ¹⁷O ≅ −5‰). We propose the following sequence of events during the formation of AOAs in the Allende meteorite: 1) Formation of Al-rich inclusions with ¹⁶O-rich oxygen isotopic composition; 2) Accretion of Mg-rich olivine grains with ¹⁶O-rich oxygen isotopic composition around Al-rich inclusions; 3) Accretion into parent body; and 4) Aqueous alteration in the parent body, which led to crystallization of ¹⁶O-poor minerals, Fe-rich olivine, anorthite, nepheline, and phyllosilicate. This is reflecting reactions among primary ¹⁶O-rich AOA minerals and aqueous fluid having ¹⁶O-poor oxygen isotopic composition. Fe-rich olivine grains precipitated from aqueous fluids, which partially dissolved pre-existing Mg-rich olivine grains. Sintering and Mg-Fe diffusion occurred during thermal metamorphism. Anorthite, nepheline and phyllosilicate in Al-rich inclusions replaced primary anorthite or melilite during the aqueous alteration stage.     

Characterization of water quality variation in the Mekong River at Vientiane by frequent observations

To better understand the variation of water quality in the Mekong River, sampling and measurement were scheduled twice a week for about 3 years at Vientiane, followed by basic statistical analysis of the observed data. The frequent measurement revealed detailed characteristics of the water quality variation, which had not been detected by monthly observation in the previous studies. The variation in total ionic content was considered to be governed by dilution of the amount of water. Increases in turbidity could be attributed to physical effects including surface soil erosion and bed material resuspension at the time of discharge increase. Nitrogen concentrations were stably low during the low flow period and abruptly increased in May. After the annual maximum in late May, the nitrate concentration steadily decreased regardless of the remarkable rise in the discharge from mid‐July, whereas the ammonium concentration remained at a similar level until October. It was considered that the first small discernable runoff after the long dry season flushed the accumulated nitrogen in the surface soil and mobilized the nitrogen in the riverbed. The variation in phosphorus concentrations was different from that in nitrogen concentrations. During the high flow period, continual dilutions at discharge peaks and occasional large additions of phosphorus by surface runoff were suggested. Copyright © 2011 John Wiley & Sons, Ltd.     

Time variation of the X-ray spectrum and optical luminosity of SCO X-1

Results of rocket observations of SCO X-1 over the spectral range of 220 keV are presented. The observations have been performed partly in India and partly in Japan under the collaboration of the three groups. The present results are compared with results of similar observations carried out by the LRL (Lawrence Radiation Laboratory) group. Some of these X-ray observations were accompanied by simultaneous optical observations. Relationships between the hardness of the X-ray spectrum and the X-ray intensity and between the hardness and the optical luminosity are compiled. The relationships among the parameters (temperature, density and size) which characterize the postulated isothermal cloud model of SCO X-1 are given. They indicate that SCO X-1 is characterized by a temperature of about 10⁷–10⁸K, a density of about 10¹⁶–10¹⁷ cm^–3 and a radius of about 10⁸–10⁹ cm respectively. We further show that the temperature is inversely correlated with the size of the source; an increase in temperature corresponds to a decrease in the radius and an increase in density.     

Multi-scale solution for building extraction from LiDAR and image data

This paper presents a multi-scale solution based on mathematical morphology for extracting the building features from remotely sensed elevation and spectral data. Elevation data are used as the primary data to delineate the structural information and are firstly represented on a morphological scale-space. The behaviors of elevation clusters across the scale-space are the cues for feature extraction. As a result, a complex structure can be extracted as a multi-part object in which each part is represented on a scale depending on its size. The building footprint is represented by the boundary of the largest part. Other object attributes include the area, height or number of stories. The spectral data is used as an additional source to remove vegetation and possibly classify the building roof material. Finally, the results can be stored in a multi-scale database introduced in this paper. The proposed solution is demonstrated using the data derived from a Light Detection And Ranging (LiDAR) surveying flight over Tokyo, Japan. The results show a reasonable match with reference data and prove the capability of the proposed approach in accommodation of diverse building shapes. Higher density LiDAR is expected to produce better accuracy in extraction, and more spectral sources are necessary for further classification of building roof material. It is also recommended that parallel processing should be implemented to reduce the computation time.     

Wave set-up in the storm surge along open coasts during Typhoon Anita

Wave set-up in storm surges is studied using a numerical model for coasts in Tosa Bay, Japan, open to the Pacific Ocean. Simulation models employing only atmospheric pressures and winds as external forces are unable to properly simulate open coast storm surge heights, such as those due to Typhoon Anita (1970). However, the present study shows that a numerical model incorporating wave-induced radiation stresses, as well as wind stresses and pressure gradients, is able to account for the open coast surge heights. There is a maximum contribution of 40% by the radiation stresses to the peak sea level rises. This study also evaluates the effects of the tides; including the tides improves the agreement between the predicted water surface elevations and the observations. The difference in predictions between one-way coupling from wave to surge models and two-way coupling of the surge and wave models is found to be small.     

Estimation of debris flow discharge coefficient considering sediment concentration

A sabo dam has a purpose to block the path of debris flow. However, when overflow occurs, a sabo dam works as a weir, a vertical obstruction, where the fluid must flow over. Many empirical formulas and discharge coefficients for weirs relating flow depth to discharge have been proposed to calculate overflow discharges. However, only a few studies about overflow discharge coefficients are available in the case of debris flow. In this paper, experiments and numerical simulations were done to estimate debris flow discharge coefficients by considering the sediment concentration. In the numerical simulation, a complete overflow equation and a free overfall equation were implemented to calculate debris overflow discharges at a sabo dam. To determine the discharge coefficients for each equation, single factor regression analysis was used. Laboratory experiments were done to calibrate and to compare with the simulation. Study results showed that the discharge coefficients increase as the sediment concentration increases. This finding suggests debris flow discharge coefficients are derived to calculate the debris overflow discharges at a sabo dam.     

Disastrous sediment discharge due to typhoon-induced heavy rainfall over fossil periglacial catchments in western Tokachi,Hokkaido, northern Japan

In August 2016, Typhoon 1610 (Lionrock) caused heavy rainfall in Hokkaido, which led to the discharge of a large volume of sediment and water from catchments on the eastern slope of the northern Hidaka Range. The eight catchments examined in this study are characterized by granitic lithology and late Pleistocene periglacial landforms with weakly cohesive, low-resistance periglacial debris thickly covering the weathered bedrocks. This characteristic of the landscape presumably provided a transport-limited condition where some debris flows were initiated by shallow landslides. As they moved, the debris flows grew larger through mobilization and erosion of sediment in channel beds and sidewalls. This sediment mobilization and erosion continued for an extensive distance along the course of the river. Morphological changes induced by channel aggradation and bank erosion were considerable and distinctive from upstream to downstream. Granitic periglacial sediments are amply present on the mountain slopes, river channels, and river banks in the area, likely due to the rarity of intensive rainfall events. These distinctive features of fossil periglacial catchments are important for disaster prevention and catchment-scale sediment management in sub-boreal areas, particularly in the context of climate change, which may generate more frequent and intensive rainfall events.