LIDAR strip adjustment: Application to volcanic areas

DEMs derived from LIDAR data are nowadays largely used for quantitative analyses and modelling in geology and geomorphology. High-quality DEMs are required for the accurate morphometric and volumetric measurement of land features. We propose a rigorous automatic algorithm for correcting systematic errors in LIDAR data in order to assess sub-metric variations in surface morphology over wide areas, such as those associated with landslide, slump, and volcanic deposits. Our procedure does not require a priori knowledge of the surface, such as the presence of known ground control points. Systematic errors are detected on the basis of distortions in the areas of overlap among different strips. Discrepancies between overlapping strips are assessed at a number of chosen computational tie points. At each tie point a local surface is constructed for each strip containing the point. Displacements between different strips are then calculated at each tie point, and minimization of these discrepancies allows the identification of major systematic errors. These errors are identified as a function of the variables that describe the data acquisition system. Significant errors mainly caused by a non-constant misestimation of the roll angle are highlighted and corrected. Comparison of DEMs constructed using first uncorrected and then corrected LIDAR data from different Mt. Etna surveys shows a meaningful improvement in quality: most of the systematic errors are removed and the accuracy of morphometric and volumetric measurements of volcanic features increases. These corrections are particularly important for the following studies of Mt. Etna: calculation of lava flow volume; calculation of erosion and deposition volume of pyroclastic cones; mapping of areas newly covered by volcanic ash; and morphological evolution of a portion of an active lava field over a short time span.     

Late Cenozoic orogenic history of Western Qinling inferred from sedimentation of Tianshui basin, northeastern margin of Tibetan Plateau

The Western Qinling orogenic belt marks the northeastern margin of the Tibetan Plateau. Its late Cenozoic orogenic history is recorded in an excellent sedimentary sequence exposed in the Tianshui sub-basin of the Longzhong basin. According to the magnetostratigraphic analysis from the Yaodian and Lamashan sections, we speculate that the late Cenozoic Tianshui basin accumulated lacustrine/floodplain deposits from ~14.8 to ~2.6?Ma. In addition, detrital apatite fission-track thermochronologic and paleocurrent data reveal that the detritus of the Tianshui basin mostly derived from the Western Qinling and that the youngest population age represents a ~14?Ma volcanic intrusion, which can be related to the lithospheric deformation and uplift of the Tibetan Plateau. Furthermore, two stages of variations in depositional facies and average accumulation rates were attributed to the pulse uplift and deformation of the Western Qinling at 9.2–7.4 and ~3.6?Ma.     

Dynamic characterisation and seismic assessment of medieval masonry towers

The paper investigates the dynamic characterisation, the numerical model tuning and the seismic risk assessment of two monumental masonry towers located in Italy: the Capua Cathedral bell tower and the Aversa Cathedral bell tower. Full-scale ambient vibration tests under environmental loads are performed. The modal identification is carried out using techniques of modal extraction in the frequency domain. The refined 3D finite element model (FEM) is calibrated using the in situ investigation survey. The FEM tuning is carried out by varying the mechanical parameters and accounting for the restraint offered by the neighbouring buildings and the role of soil–structure interaction. The assessment of the seismic performance of the bell towers is carried out through a nonlinear static procedure based on the multi-modal pushover analysis and the capacity spectrum method. Through the discussion of the case studies, the paper shows that the modal identification is a reliable technique that can be used in situ for assessing the dynamic behaviour of monumental buildings. By utilising the tuned FEM of the towers, the theoretical fundamental frequencies are determined, which coincide with the previously determined experimental frequencies. The results from seismic performance assessment through a pushover analysis confirm that the masonry towers in this study are particularly vulnerable to strong damage even when subjected to seismic events of moderate intensity.     

Improved Leap—Frog Symplectic Integrators for Orbits of Small Eccentricity in the Perturbed Kepler Problem

I have improved the precision of the leap–frog symplectic integrators for perturbed Kepler problems at small eccentricities, without significant loss of CPU time. The integration scheme proposed is competitive, in some situations, with the so-called mixed variable integrators.     

Clinopyroxenes from metasomatized spinel-peridotite mantle xenoliths from Nemby (Paraguay): crystal chemistry and petrological implications

Summary The Nemby mantle xenoliths are represented by spinel peridotites variably affected by “metasomatic processes” in Proterozoic times (1.2–0.5 Ga). Clinopyroxene compositional variations mainly reflect variably degrees of basalt extraction and mantle “metasomatic processes”. Clinopyroxene crystal chemistry allows to estimate the equilibration pressure by V(Cell) and V(M1) relationship. The investigated clinopyroxenes yielded a pressure range of 12–18 kb. Therefore, the Nemby xenoliths are representative of about 20 km thickness of subcontinental lithospheric mantle of the South America platform at Tertiary times (ca. 46 Ma).

---

Zusammenfassung Klinopyroxene aus metasomatischen Spinell-Peridotit-Mantel Xenolithen aus Nemby (Paraguay): Kristallchemie und petrologische Bedeutung Die Mantelxenolithe aus Nemby sind Spinellperidodite, die in verschiedenem Ausma? im Proterozoikum (1.2 bis 0.5 Ga) durch “metasomatische Prozesse” beeinflusst wurden. Variationen in der Zusammensetzung der Klinopyroxene lassen variable Ausma?e von Basaltextraktion und Mantelmetasomatose erkennen. Die Kristallchemie der Pyroxene erm?glicht es, den Gleichgewichtsdruck durch V(Cell) und V(M1) Beziehungen zu bestimmen. Die untersuchten Klinopyroxene zeigten Drucke im Bereich von 12 bis 18 kb. Die Nemby Xenolithe sind deshalb repr?sentativ für einen ungef?hr 20 km dicken subkontinentalen lithosph?rischen Mantel der südamerikanischen Plattform im Terti?r (ca. 46 Ma).

---

---

Received February 1, 1999; revised version accepted November 26, 1999     

Scaling improves stability of preconditioned CG‐like solvers for FE consolidation equations

Preconditioned projection (or conjugate gradient like) methods are increasingly used for the accurate and efficient solution to finite element (FE) coupled consolidation equations. Theory indicates that preliminary row/column scaling does not affect the eigenspectrum of the iteration matrix controlling convergence as long as the preconditioner relies on the incomplete factorization of the FE coefficient matrix. However, computational experience with mid‐large size problems shows that the above inexpensive operation can significantly accelerate the solver convergence, and to a minor extent also improve the final accuracy, as a result of a better solver stability to the accumulation and propagation of floating point round‐off errors. This is demonstrated with the aid of the least square logarithm (LSL) scaling algorithm on FE consolidation problems of increasing size up to more than 100 000. It is shown that a major source of numerical instability rests with the sub‐matrix which couples the structural to the fluid part of the underlying mathematical model. It is concluded that for mid‐large size, possibly difficult, FE consolidation problems left/right LSL scaling is to be always recommended when the incomplete factorization is used as a preconditioning technique. Copyright © 2003 John Wiley & Sons, Ltd.     

High-resolution spectrometer for atmospheric studies

A high-resolution spectrometer (0.0014 nm at 313 nm) has been developed at the University of L’Aquila (Italy) for atmospheric spectroscopic studies. The layout, optics and software for the instrument control are described. Measurements of the mercury low-pressure lamp lines from 200 to 600 nm show the high performances of the spectrometer. Laboratory measurements of OH and NO₂ spectrums demonstrate that the system could be used for cross-section measurements and to detect these species in the atmosphere. The first atmospheric application of the system was the observation of direct solar and sky spectrums that shows a filling-in of the sky lines due to rotational Raman scattering. The measurements have been done with clear and cloudy sky and in both there was a strong dependence of the filling-in from the solar zenith angle whereas no dependence from the wavelengths was evident at low solar zenith angles (less than 85°).     

Changes in the wind-wave field and related salt-marsh lateral erosion: inferences from the evolution of the Venice Lagoon in the last four centuries

Salt marshes are crucially important ecosystems at the boundary between the land and the sea, that are experiencing significant losses worldwide mainly dictated by the erosion of their margins. Improving our understanding of the mechanisms controlling marsh edge erosion is a key step to address conservation issues and salt-marsh response to changes in the environmental forcing. Here we have employed a complete, coupled Wind-Wave Tidal Model (WWTM) to analyse the temporal evolution of the wave field, and in particular of the mean wave-power density, in the Venice Lagoon over the past four centuries (from 1611 to 2012). We have then related wave-field changes to the observed erosion patterns determined by comparing recent aerial photographs (1978–2010) and historical bathymetric data. The results of our analyses from the Venice Lagoon show that, while wave-fields did not significantly change from 1611 to 1901, a rapid increase in wave-power densities occurred in the last century. This is suggested to depend on the positive feedback between relevant morphological evolutions and changes in the wave field, both influenced by natural forcing and anthropogenic pressures. We also emphasize the existence of a strong positive linear relationship between the volumetric marsh erosion rate and mean wave-power density. We thus suggest that relating salt-marsh lateral erosion rates to properly computed mean wave-power densities provides a valuable tool to address long-term tidal morphodynamics. © 2019 John Wiley & Sons, Ltd.