Ecology and restoration techniques for Sargassum beds in the Seto Inland Sea,Japan

Due to the reduction and degradation of coastal areas in Japan by land reclamation and anthropogenic perturbations, from the point of view of conservation of the coastal environment, the restoration of Sargassum beds is essential. Between 1978 and 1991, 6400 ha of seagrass and seaweed beds have been lost along the Japanese coast, of which Sargassum beds were 22%. New techniques for Sargassum bed restoration are summarized based on three coastal engineering techniques. (1) Construction of shallow and gentle sloping bottom substrata have been shown to be effective for the reestablishment of 'management-free seagrass and Sargassum beds' on developed coasts. (2) Seeding or transplanting using artificial substratum for extension of nursery and fishing grounds around natural Sargassum beds. (3) Periodic transplanting of Sargassum plants using artificially produced seedlings is effective to produce niches to allow faunal re-colonization in severely polluted and sparsely vegetated area. However, prior to implementation, the suitability and limitations of these three techniques requires to be ascertained for effective Sargassum bed restoration.     

Deformation mechanisms and fluid behavior in a shallow, brittle fault zone during coseismic and interseismic periods: Results from drill core penetrating the Nojima Fault, Japan

Abstract This paper describes the results of petrographical and meso- to microstructural observations of brittle fault rocks in cores obtained by drilling through the Nojima Fault at a drilling depth of 389.52 m. The zonation of deformation and alteration in the central zone of the fault is clearly seen in cores of granite from the hanging wall, in the following order: (i) host rock, which is characterized by some intragranular microcracks and in situ alteration of mafic minerals and feldspars; (ii) weakly deformed and altered rocks, which are characterized by transgranular cracks and the dissolution of mafic minerals, and by the precipitation of zeolites and iron hydroxide materials; (iii) random fabric fault breccia, which is characterized by fragmentation, by anastomosing networks of transgranular cracks, and by the precipitation of zeolites and iron hydroxide materials; and (iv) fault gouge, which is characterized by the precipitation of smectite and localized cataclastic flow. This zonation implies that the fault has been weakened gradually by fluid-related fracturing over time. In the footwall, a gouge layer measuring only 15 mm thick is present just below the surface of the Nojima Fault. These observations are the basis for a model of fluid behavior along the Nojima Fault. The model invokes the percolation of meteoric fluids through cracks in the hanging wall fault zone during interseismic periods, resulting in chemical reactions in the fault gouge layer to form smectite. The low permeability clay-rich gouge layer sealed the footwall. The fault gouge was brecciated during coseismic or postseismic periods, breaking the seal and allowing fluids to readily flow into the footwall, thus causing a slight alteration. Chemical reactions between fluids and the fault breccia and gouge generated new fault gouge, which resealed the footwall, resulting in a low fluid condition in the footwall during interseismic periods.     

Clinoenstatite in volcanic rocks from the Bonin Islands

Multiply-twinned clinoenstatite has been found in andesitic rocks from Chichi-jima and Mukojima in the Bonin Islands.The clinoenstatite occurs as (1) reaction rims around olivine, (2) composite crystals with bronzite, and (3) anhedral phenocrysts rimmed or included by bronzite.The clinoenstatite is chemically characterized by low contents of Ca (less than 0.5 wt.% oxide), Fs (9.2–11.5) and Al (less than 0.6 wt.% oxide) relative to the coexisting bronzite. The partition coefficient, K _{D op} ^cp =(Mg/Fe²⁺)^cp/(Mg/Fe²⁺)^op between coexisting clinoenstatite and bronzite, ranges from 1.02 to 1.32 (average 1.17). The Fe²⁺/Mg+Fe²⁺ ratios of coexisting clinoenstatite and bronzite are different in different rock types, which suggests variable inversion temperatures of protoenstatite to orthopyroxene in boninite.Bronzite phenocrysts in a specimen, ranging from Fs15 to Fs30, coexist with augite phenocrysts, whereas those in the other specimens, ranging from Fs12 to Fs18, do not coexist with augite phenocrysts. These differences in petrographical nature and mineral chemistry among the specimens examined may be due to variations in their quenching stages.The boninite clinoenstatite and bronzite are relatively rich in Ca and Mg, compared with the Papuan and Mariana pyroxenes, which seems to depend upon the rock chemistry.     

Building Damage and Casualties after an Earthquake

The relationship between building damage patterns and human casualties in Nishinomiya City – one of the most heavily damaged cities in the 1995 Hanshin-Awaji Earthquake Disaster – was investigated using photographs of damaged buildings. First, the photographs of buildings in which casualties occurred were identified, and the building damage patterns were judged based on the photographs considering the existence of survival space. Then the relationship between the building damage pattern and casualty occurrence, and the characteristics of casualty distribution, were investigated. The main findings were as follows: Most casualties occurred in relatively old two-story wooden buildings in which the ground floor completely collapsed without survival space; casualties occurred at all building damage levels including ``no damage', and it can be seen that building damage is the major, but not the sole cause, of casualties in an earthquake; in Nishinomiya City, the regional distributions of casualties due to the collapse of buildings that left no survival space is similar to that of casualties due to other types of building damage.     

Statistical characteristics of individual waves in laboratory wind waves

On the basis of data on the statistical characteristics of individual waves in laboratory wind waves reported in part I of this series, a self-consistent similarity regime is found to exist among properties of the individual waves, such as the nondimensional frequency, the wave number, the phase speed, and the steepness. Also, it is shown that forms of past empirical formulas for the development of the peak wave can be derived starting from the 3/2-power law, as an extension of the persent laboratory experimental data. In the derivation, only values of the coefficient of the 3/2-power law, and the fraction of momentum transferred from the wind retained by the wind waves, remain on an empirical basis.     

Age compositions of flatfish stocks as determined by a new otolithometric method, its application in the estimation of growth, spawning potential and fisheries management

We developed an ageing methodology and examined age composition of three flatfish stocks inhabiting the Seto Inland Sea, Japan. Ages were difficult to determine for three-lined tongue sole (Cynoglossus abbreviates) and ridged-eye flounder (Pleuronichthys cornutus) because the first year annulus ring was often indistinct; therefore, we used directional change in otolith growth to distinguish it. Sectioning and etching methods were powerful tools for identifying annual checks for red tongue sole (Cynoglossus joyneri). Using these ageing methods, we determined age–length relationships and growth curves. The age composition of the populations studied and of the landings showed that a large proportion of the latter consisted of individuals under the mean age of sexual maturity, thereby reducing the percent spawning potential ratio (%SPR) to ≈ 20% for all species. These findings suggest that fishing pressure on immature fish is leading to overfishing of these flatfish stocks.     

Three-year investigations into sperm whale-fall ecosystems in Japan

We report the first study of sperm whale‐fall ecosystems, based on mass sinking of whale carcasses at shelf depths in the northwest Pacific. We conducted three observations over a 2‐year period on replicate sperm‐whale carcasses implanted at depths of 219–254 m off the southern part of Japan from July 2003 to August 2005. The study was made possible by a mass stranding of sperm whales in January 2002, and the subsequent sinking of 12 carcasses in the waters off Cape Nomamisaki. Dense aggregations of unique chemosynthesis‐based fauna had formed around the whale carcasses after 18 months (July 2003). The mytilid mussel Adipicola pacifica was the most abundant macrofaunal species and covered most of the exposed bone surfaces. The general composition of the fauna was similar to that of deep‐water reducing habitats, but none of the species appearing in this study has been found at hydrothermal vents, cold seeps or deep‐water whale falls. A new species of lancelet, which was the first record of the subphylum Cephalochordata from reducing environments, a new species of Osedax; a rarely encountered benthic ctenophore, and a rare gastropod species were discovered at this sperm whale‐fall site. Benthic communities were similar across all the carcasses studied, although the body sizes of the whales were very different. The succession of epifaunal communities was relatively rapid and the sulphophilic stage was considerably shorter than that of other known whale falls.     

Detailed observation of the wind-exerted surface flow by use of flow visualization methods

Detailed observations were performed of the wind-exerted surface flow, before and after the generation of wind waves. As flow visualization techniques, 6 classes of polystyrene beads of from 0.33 mm to 1.93 mm in diameter, with a specific gravity of 0.99, and also, hydrogen bubble lines, were used. Experiments were carried out at three ranges of the wind speed: 4.0, 6.2 and 8.6ms^–1 in the mean in the wind-wave tunnel section, and the observations were made at 2.85 m in fetch. In the case of 6.2 m s^–1, when the initial surface skin flow attains 0.22 cm in the scale thickness and 16 cm s^–1 in the surface velocity in about 3 second from the onset of the wind, regular waves of about 1.7 cm in wave length appear on the water surface. In one second after that, the downward thrust of the surface flow and the consequent forced convection commences, and the transition of the surface layer to a turbulent state occurs. Ordinary wind waves begin to develop from this state. In developed wind waves the viscous skin flow grows on the windward side of the crests, frequently producing macroscopic skin flows, and these skin flows converge to make a downward thrust at the lee side, and the viscous skin layer disappears there. The velocity of the downward flow has a maximum at the phase of about 30, and the value is of the order of 10 cm s^–1 at 4-mm depth after the orbital velocity of the sinusoidal wave is subtracted. As the process through which the wind stress acts on the water surface, it is considered that the following particular one may be real: the skin friction concentrated at the windward side of the crest produces skin flows, which thrust into the inner region to make the forced convection, carrying the acquired momentum. The viscous shearing stress just before the generation of the surface undurations was about 1/4 of the total shearing stress under the existence of wind waves. It is considered that the increase of the wind stress by wind waves is caused by this mechanism.     

Enhanced Dissolved Organic Matter Recovery from Saltwater Samples with Electrodialysis

Complexities associated with dissolved organic matter (DOM) isolation from seawater have hampered compositional characterization of this key component of global carbon and nutrient cycles. DOM isolation efficiency by electrodialysis (ED) from salt-containing waters was optimized and evaluated on samples including coastal ocean seawater, open ocean seawater, artificial seawater from axenic cultures of marine phytoplankton, and artificial seawater samples containing standard compounds of different molecular sizes and charge. ED was performed with a system optimized for processing 2–10 L sample volumes. Additionally, the combination of ED and solid-phase extraction, using Bond Elut PPL exchange resin, was evaluated. Using only ED, the following DOC recoveries were achieved: coastal seawater, 71.3 ± 6.5 %; open ocean, 50.5 ± 3.1 %; phytoplankton cultures, 70.3 ± 12.5 %; glucose, 90.2 ± 2.1 %; EDTA, 67.5 ± 9.9 %; and vitamin B₁₂, 98.3 ± 1.6 %. With the combination of PPL and ED techniques, an average DOC recovery of 76.7 ± 2.6 % was obtained for coastal seawater, but this recovery was not statistically different from seawater recoveries using only ED. Comparison of C/N ratios and fluorescence excitation emission matrices taken at the beginning and end of the recovery process for coastal samples processed using only ED indicated that the final recovered material was representative of the DOM present in the original samples. Typical recoveries using combined PPL and ED exceed those of previous isolation methods.