(Au,Ag)Te2 Minerals from Epithermal Gold Deposits in Japan

Chemical composition and mode of occurrences of (Au, Ag)Te₂ minerals such as calaverite (AuTe₂), sylvanite (AuAgTe₄) and krennerite ((Au, Ag)Te₂) in epithermal gold telluride ores from Suzaki, Kawazu and Teine are examined. In the ores from Suzaki, (Au, Ag)Te₂ minerals occur in microbands of tellurides and fine quartz. The minerals in telluride bands change from krennerite, via calaverite‐native tellurium, to sylvanite, in the order of crystallization. A sample from Kawazu contains sylvanite and native tellurium with stutzite, hessite and tetradymite in the coarser gray quartz part. The Teine sample also contains sylvanite and native tellurium with barite and quartz. The peak patterns of XRD of calaverite, krennerite and sylvanite from Suzaki are almost identical to that of JCPDS 43–1472, JCPDS 8–20 and JCPDS 9–477, respectively. The Te, Au, Cu, and Ag contents of calaverite from Suzaki range from 56.4 to 57.9 wt.%, from 41.6 to 42.6 wt.%, from 0.28 to 0.45 wt.% and from 0.14 to 0.31 wt.%, respectively, corresponding to the formula Au_0.97Ag_0.01Cu_0.02Te₂. The Te, Au, Ag, and Cu contents of krennerite from Suzaki range from 59.6 to 61.4 wt.%, from 31.3 to 33.6 wt.%, from 4.91 to 6.13 wt.% and from 0.66 to 0.80 wt.%, respectively, corresponding to the formula Au_0.71Ag_0.22Cu_0.05Te₂ with Au and Ag ranging from 0.68 to 0.74 and from 0.20 to 0.25, respectively. The Te, Au, Ag, and Cu contents of sylvanite from Suzaki range from 61.5 to 63.4 wt.%, from 24.1 to 27.4 wt.%, from 10.0 to 12.5 wt.% and from 0.00 to 0.12 wt.%, respectively. The Te, Au, Ag, and Cu contents of sylvanite from Kawazu range from 62.7 to 63.3 wt.%, from 23.5 to 24.1 wt.%, from 12.0 to 12.5 wt.% and from 0.09 to 0.16 wt.%, respectively. The Te, Au, Ag, Cu and Fe contents of sylvanite from Teine range from 61.8 to 63.5 wt.%, from 23.6 to 24.7 wt.%, from 11.9 to 13.3 wt.%, from 0.01 to 1.65 wt.% and from 0.00 to 0.02 wt.%, respectively. The average formulae of sylvanite from Suzaki, Kawazu, and Teine are expressed as Au_1.06Ag_0.94Cu_0.02Te₄, Au_1.00Ag_0.95Cu_0.02Te₄ and Au_1.01Ag_0.95Cu_0.06Te₄, respectively. Judging from the mineral assemblages of these ores and other localities, Au–Te mineralization in the Japanese Islands can be divided into four types: native gold–calaverite at Date and Agawa, krennerite(?native tellurium) at Osore‐zan and Mutsu, sylvanite–native tellurium–hessite at Teine, Kawazu, Kobetsuzawa, and Kato, and polyminerallic assemblages at Suzaki and Kushikino. The pH–Eh diagram of aqueous tellurium species and tellurium minerals at 250°C indicates that (Au, Ag)Te₂ minerals in epithermal gold telluride mineralization would have been formed under middle to low Eh and acidic (to intermediate) pH conditions. It is possible that dilute tellurium‐containing fluid would scavenge dilute gold.     

Effects of the copepod community structure on fecal pellet flux in Kagoshima bay,a deep,semi-enclosed embayment

Seasonal changes in the shape and size composition of fecal pellets were investigated with sediment trap samples from 50 and 150 m in Kagoshima Bay to evaluate how the mesozooplankton community affects fecal pellet flux. Deep vertical mixing was evident in March, and thermal stratification was developed above 50 m in June, August and November. Chlorophyll a, suspended particulate organic carbon (POC) and copepod abundance were uniform throughout the water column during the seasonal mixing and concentrated above 50 m in the stratified seasons. Calanoids were the most predominant copepods in March and poecilostomatoids composed more than 45% of the copepod community in June, August and November. Fecal pellet fluxes at 50 and 150 m were the highest in March, nearly half of POC flux. The relative contribution declined considerably in the other months, especially for less than 4% of POC flux in August. The decline was corresponded to the predominance of cyclopoids and poecilostomatoids. Cylindrical pellets dominated the fecal matters at both depths throughout the study period, while larger cylindrical pellets nearly disappeared at 150 m in June, August and November. Copepod incubation revealed that cylindrical and oval pellets were egested by calanoids and the other copepods, respectively. We suggest that cylindrical fecal pellets produced by calanoid copepods contribute to feces flux but the predominance of poecilostomatoids and/or cyclopoids decreases feces flux via the increase of oval pellets and fragmentation of larger cylindrical pellets.     

侵蚀沉积模型在嘉陵江流域的应用

从20世纪50年代到80年代长江宜昌水文站观测的泥沙输送量逐年增加,但是到了90年代却出现了逐渐减少的趋势。泥沙量增加的原因主要是乱伐森林和土地利用方式的快速改变,而减少的原因则可能是采取了一系列防止水土流失的对策和在上游修建了许多大坝而造成的。嘉陵江流域是长江泥沙的主要源区之一,90年代每年从嘉陵江流域到长江的输沙量减少到1988年前的约36%。因此,分析该流域每年泥沙输送动态及其变化原因,对制定减小水土流失的森林规划,防止三峡水库的淤积以及保护长江流域的生存环境和生态系统等具有重大意义。本研究开发并改进了一个流域集水坡面上的侵蚀模型,并将它应用到1987年的嘉陵江流域,以对其适用性进行了研究。结果表明,该模式可被用于月度泥沙生产量的评估中。     

N-body simulation of giant molecular clouds in a galaxy

We madeN-body simulation of Giant Molecular Clouds in a model galaxy and confirmed that their random motion is generated and accelerated by purely gravitational interaction among them in some 10^7–8 yr. The results of the present simulation agree well with those of the previous theoretical calculation by Fukunaga (1984a, b).Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984.     

Geological and geophysical studies of the Nojima Fault from drilling: An outline of the Nojima Fault Zone Probe

Abstract The Nojima Fault Zone Probe was designed to study the properties and recovery processes of the Nojima Fault, which moved during the Hyogo-ken Nanbu earthquake ( M _JMA7.2) of 1995. Three holes, 500 m, 800 m and 1800 m deep, were drilled into or near the fault zone by the Disaster Prevention Research Institute, Kyoto University. The 500 m and 800 m holes were drilled in November 1995, and in December 1996 the last hole reached its final depth of 1760 m. The significant results are: (i) Geological and geophysical reconstruction of the structure and evolution of the Nojima Fault was obtained; (ii) the maximum compression axis was found to be perpendicular to the fault, approximately 45° to the regional compression stress axis; (iii) micro-earthquakes (m = –2 to +1) were induced by water injections 1–3 km from the injection points in the 1800 m hole; (iv) the fault zone was measured to be 30 m wide from microscopic studies of core samples. Instruments such as three-component seismometers, crustal deformation instruments, and thermometers were installed in the holes.     

Warped temperature profiles observed in the sediment of geothermally active areas in the Japan Sea— A hypothesis of double diffusive sinking

Some temperature profiles observed in sea floor sediments of the Japan Sea, west of the northern part of Honshu, show distinct gradients changing with depth, for which we use the term warping. Using a simplified model, this warping can be attributed to an abrupt temperature change in the bottom water just above the sediment. The bottom water temperature change might be explained by the hypothesis that warm and salt surface water in the region sank to the sea bottom, through colder and less saline water, maintaining a relatively warmer temperature than the bottom water which originates from ordinary lateral intrusion.     

Monitoring and simulation of water, heat, and CO2 fluxes in terrestrial ecosystems based on the APEIS-FLUX system

The Integrated Environmental Monitoring (IEM) project, part of the Asia-Pacific Environmental Innovation Strategy (APEIS) project, developed an integrated environmental monitoring system that can be used to detect, monitor, and assess environmental disasters, degradation, and their impacts in the Asia-Pacific region. The system primarily employs data from the moderate resolution imaging spectrometer (MODIS) sensor on the Earth Observation System- (EOS-) Terra/Aqua satellite, as well as those from ground observations at five sites in different ecological systems in China. From the preliminary data analysis on both annual and daily variations of water, heat and CO2 fluxes, we can confirm that this system basically has been working well. The results show that both latent flux and CO2 flux are much greater in the crop field than those in the grassland and the saline desert, whereas the sensible heat flux shows the opposite trend. Different data products from MODIS have very different correspondence, e.g. MODIS-derived land surface temperature has a close correlation with measured ones, but LAI and NPP are quite different from ground measurements, which suggests that the algorithms used to process MODIS data need to be revised by using the local dataset. We are now using the APEIS-FLUX data to develop an integrated model, which can simulate the regional water, heat, and carbon fluxes. Finally, we are expected to use this model to develop more precise high-order MODIS products in Asia-Pacific region.     

Geothermal constraints on the hydrological regime of the TAG active hydrothermal mound, inferred from long-term monitoring

During August 1994 to March 1995, a period that included ODP Leg 158 drilling, bottom-water and sub-bottom temperatures were continuously logged by a long-term temperature monitoring system ‘Daibutsu’ at the base of the central black-smoker complex (CBC) and within the low heat flow zone at the TAG hydrothermal mound on the Mid-Atlantic Ridge. The temperature of hydrothermal fluid at CBC was also measured with a small high-temperature probe ‘Hobo’. Bottom-water temperature variations measured with Daibutsu at both sites have predominant semi-diurnal periods, causing the sub-bottom temperatures to fluctuate at these periods with reduced amplitudes and phase delays at sub-bottom depths. Seawater entrainment into the mound has been previously suggested at the low heat flow zone. We quantitatively evaluate the seawater entrainment rate at both sites from a one-dimensional numerical model, combined with a heat conduction model for the semi-diurnal variations. The entrainment rate of seawater at the base of CBC is estimated as 1.3±0.5×10⁻⁵ m/s, at least from August 17 to 30, 1994. On the other hand, the seawater entrainment rate at the low heat flow zone was undetected by long-term temperature monitoring at shallow sub-bottom depth. Nevertheless an increase in heat flow observed at the low heat flow zone during ODP drilling can be interpreted as a decrease in the entrainment rate of seawater. Before ODP Leg 158, Daibutsu measured three sub-bottom temperature anomalies at the base of CBC not derived from bottom-water temperature variations and Hobo also detected a CBC fluid temperature anomaly, indicating some natural changes in fluid flow within the mound. Daibutsu and Hobo also measured temperature anomalies during and after drilling at the ODP TAG-1 area. The Hobo temperature anomalies are inferred to have occurred when the cold fluid entrained through the drill holes at TAG-1 site reached or cooled the main fluid path to CBC. The entrained seawater through the drill holes appears to have contributed to dissolution and precipitation of anhydrite within the mound and perhaps affected the local permeability structure inside the mound. The temperature anomalies measured with Daibutsu at the base of CBC may have been induced by the change in the fluid flow pattern as a result of such permeability changes within the mound.     

Faulting in the Mikawa earthquake of 1945

This paper discusses the fault parameters of the Mikawa earthquake of January 12, 1945 on the basis of a simple dislocation model. Basically, the model assumes a rectangular shape of the fault plane striking N-S, so that it may fit the observed surface fault trace. Several sets of the fault parameters are tested to interpret the vertical and horizontal ground movements as observed geodetically. The fault model which is finally accepted is as follows: total length: 12 km; width: 11 km; dip angle: 30°; reverse dip-slip: 2 m; right-lateral strike-slip: 1 m. Geometry and slip in the present model seem to harmonize with the other sorts of evidence such as the seismological, tsunami genetic and reconnaissance data. From the tectonic point of view, this earthquake may be attributed to the secondary fault activity associated with the right lateral movement of the Median Tectonic Line.