A numerical experiment on the variations of western boundary currents: Part I. Formation of western boundary currents

A numerical experiment is made using a barotropic model for the western boundary currents. The time-dependent, non-linear vorticity equation is integrated with and without the variable of bottom topography. The inertial and frictional boundary flow is resolved with a fine grid size of 10 km. Connection of the western boundary currents with the general circulation is facilitated by giving the fixed Sverdrup transport at the eastern boundary of the model (400 km offshore).For the flat bottom topography, steady flow forRe=35 shows dynamical balance essentially of a frictional model. The transient response leading to the formation of the western boundary currents in the model seems to support theLighthill's theory (1969). ForRe=350, unsteady features revealed byBryan (1963) is re-established. A phenomenon of barotropic instability is also observed with sufficient resolution. For the model with a continental slope the steady flow is also obtained forRe=35. The boundary currents flow over the continental slope, deviating offshore as they flow northward.     

Perturbed physics ensemble using the MIROC5 coupled atmosphere–ocean GCM without flux corrections: experimental design and results

In this study, we constructed a perturbed physics ensemble (PPE) for the MIROC5 coupled atmosphere–ocean general circulation model (CGCM) to investigate the parametric uncertainty of climate sensitivity (CS). Previous studies of PPEs have mainly used the atmosphere-slab ocean models. A few PPE studies using a CGCM applied flux corrections, because perturbations in parameters can lead to large radiation imbalances at the top of the atmosphere and climate drifts. We developed a method to prevent climate drifts in PPE experiments using the MIROC5 CGCM without flux corrections. We simultaneously swept 10 parameters in atmosphere and surface schemes. The range of CS (estimated from our 35 ensemble members) was not wide (2.2–3.2?°C). The shortwave cloud feedback related to changes in middle-level cloud albedo dominated the variations in the total feedback. We found three performance metrics for the present climate simulations of middle-level cloud albedo, precipitation, and ENSO amplitude that systematically relate to the variations in shortwave cloud feedback in this PPE.     

X-ray observation of the Jovian impacts of comet Shoemaker - Levy 9

An ASCA observation of the Jovian impact of the comet Shoemaker-Levy 9 is reported. Four impacts of H, L, Q1 and R were observed and four impacts of B, C, G, and Q2 were observed within 60 minutes after their impacts. No significant flaring of X-ray emission was observed. Upper limit X-ray fluxes of 90 % confidence level, averaged 5 minutes just after the impacts, were 2.4 × 10^–13 erg sec^–1 cm^–2, 3.5 × 10^–13 erg sec^–1 cm^–2, 1.6 × 10^–13 erg sec^–1 cm^–2 and 2.9 × 10^–13 erg sec^–1 cm^–2 for the impacts of H, L, Q1 and R, respectively, in the 0.5(0.7 for H and Q1)–10 keV energy range. However, a hint of X-ray enhancement around Jupiter from July 17 to July 19 was detected with about 2 6 × 10^–14 erg sec^–1 cm^–2 in the 0.5–10 keV energy range.     

BALLOON-BORNE MEASUREMENTS OF AEROSOL VERTICAL DISTRIBUTIONS OVER BEIJING DURING THE SUMMER AND AUTUMN OF 1993

The results of two balloon soundings during the summer and autumn of 1993 from the Xianghe Observation Station are being utilized in a study of the temporal and spatial distribution of the atmospheric aerosols.The balloon,gondola,instrumentation and atmospheric conditions during the observation period are described.The temporal and spatial characteristics of aerosol concentration,size ratio,mixing ratio,and size distribution for both troposphere and strato-sphere are presented and analyzed.     

Modification of the High-Pressure-Type Chromites into the Low- Pressure-Type: Petrological Investigation of the Podiform Chromitites in the Luobusa Ophiolite, Tibet

<正>The podiform chromitites in the Luobusa ophiolite,Southern Tibet,have received much attention because of the presence of ultrahigh-pressure minerals,such as microdiamonds(Bai et al.,1993;Yang et al.,2007;Xu et al.,2009),coesite(Yang et al.,2007)and highly reduced metal phases(Bai et al.,2000;Robinson et al.,2004).The     

Relations between load and settlement of circular foundations on or in a dense sand expressed by a function of diameter and depth

When load acts on a circular foundation on or in a dense sand, average contact pressure on the lower surface of the foundation is q and settlement of the foundation is s. Diameter and depth of the foundation are B and D_f. When the sand, B and D_f are given, we can know the relation between q and s/B by, e.g. a loading test, i.e. the relation is determined by B and D_f for the sand. Using the results of numerical analyses, we express a relation between q and s/B up to s=0.1B by functions of a single variable which is a linear combination of B and D_f. Consequently when two foundations have different B's and different D_f's but have the same value of the variable, the relations are the same. Then we examine whether the functions can express the results of eleven tests of model foundations of wide range of B and/or D_f. In all the tests, the relations are expressed with sufficient accuracy. Copyright © 2005 John Wiley & Sons, Ltd.     

Crystal chemical significance of chemical zoning in dissakisite-(Ce)

Dissakisites from Trimouns dolomite mine, France, have two kinds of single crystals: chemical-zoned and homogeneous types. Back-scattered electron microprobe (BSE) images of these dissakisites reveal both Ca–Al rich dark zones and Fe-ΣREE rich bright zones. Crystal structures of three dark and two bright zones in a chemical-zoned dissakisite and of a homogeneous zone in unzoned dissakisite were refined to individual R indices (about 3.0–5.0%) based on 1,400 observed [|F ₀| > 4σF ₀] reflections measured with MoKα X-radiation using the single crystal diffractometer. The differences in brightness between their BSE images arise from those in coupled substitutions of the elements occupying A2 and M3 sites. The main reason for these differences is that ten-coordinated A2 polyhedra and M3 octahedra are directly linked through their shared edge, which creates a great potential for making this coupled substitution. This zoning indicates that formation of the whole zoned crystal, where each zone could be grown steadily with its crystallographic axes mutually parallel to each other, may be identified as autoepitaxy.     

Investigating the vibration properties of integrated ceiling systems considering interactions with surrounding equipment

Studies on recent earthquakes highlighted that buildings with minimal structural damage still suffer from extensive damage and failure of nonstructural components. The dropping and damage of suspended ceiling systems, which typically consist of acceleration-sensitive nonstructural elements, resulted in lengthy functional disruptions and extended recovery time. This article experimentally and analytically examined the vibration properties of an integrated ceiling system considering the interactions with surrounding electrical equipment. The theoretical stiffness and corresponding frequency of electrical equipment were initially derived and then verified by subsequent vibration tests and numerical analyses. The seismic performance of the air conditioner (AC) was evaluated with different installment configurations based on design spectra and floor response spectra. Vibration tests of the suspended integrated ceiling system considering the interactions with surrounding equipment showed that the inclusion of peripheral constraints increased the first horizontal vibration frequency of the ceiling system by a factor of approximately 6. The natural frequencies of all components in the integrated ceiling system were almost identical, which was attributed to the coupled behavior between the ceiling panels and surrounding equipment, emphasizing the effect of interactions between adjacent components during dynamic analysis. Based on the above experimental investigation, an associated numerical model of the integrated ceiling system was created. Finally, corresponding parametric studies that included the interactions with surrounding equipment, reinforcing braces of ACs and strengthening members at the rise-up location between two elevations were performed.