Geoarchaeological studies in Nara,Japan: The integrated findings

In this article, the authors summarize 20 years of scholarship and two field projects on geoarchaeology in Nara, Japan, carried out by researchers from 12 different institutions in 4 countries. The research goal was to test an aerial photographic reconstruction of surface landforms in the Nara Basin with subsurface data. Project A was conducted at Asawa; it tested, through geological coring, whether a suspected swampy backmarsh in the eastern basin existed and whether it would yield data on the transition to wet rice agriculture in the mid‐1st millennium B.C. Project B was conducted at Miwa; it tested, through geological coring and subsequent excavation, the nature of upland agricultural terrace formation in the southeastern basin and whether the suspected existence of a 4th‐century palace site could be confirmed. Two layers of carbonaceous clay at Asawa were dated to the Early (˜5000–3500 B.C.) and Final (˜1000‐300 B.C.) phases of the Jomon period. Pollen data revealed the establishment of an evergreen oak forest from 5,000 years ago and anthropogenic changes in forest cover from 2,000 years ago. Phytoliths from rice, millets, reeds, and bamboo were recovered in layers postdating the Final Jomon carbonaceous clay. A fault scarp with anthropogenic modification of the terraces was identified at Miwa. It was discovered that an incised stream valley had been infilled in the Medieval period at the same time surface layers were razed; the front of the terrace was extended in the premodern period. Remains were recovered from the Middle Yayoi (˜100 B.C.–A.D. 100) and the Medieval (˜A.D. 1185–1603) periods. However, as the terracing involved razing the early historic levels, no data were recovered on the alleged 4th‐century palace site. The significance of these findings lies in the identification of (a) a swampy backmarsh at Asawa, where initial agricultural efforts in growing wet rice in the basin may have occurred, confirming the aerial photographic reconstruction; and (b) hillside terracing activities at Miwa, from the Medieval period onwards, which have radically changed the configuration of the natural topography. © 2005 Wiley Periodicals, Inc.     

Agricultural risk management policies under climate uncertainty

Climate change is forecasted to increase the variability of weather conditions and the frequency of extreme events. Due to potential adverse impacts on crop yields it will have implications for demand of agricultural risk management instruments and farmers’ adaptation strategies. Evidence on climate change impacts on crop yield variability and estimates of production risk from farm surveys in Australia, Canada and Spain, are used to analyse the policy choice between three different types of insurance (individual, area-yield and weather index) and ex post payments. The results are found to be subject to strong uncertainties and depend on the risk profile of different farmers and locations; the paper provides several insights on how to analyse these complexities. In general, area yield performs best more often across our countries and scenarios, in particular for the baseline and marginal climate change (without increases in extreme events). However, area yield can be very expensive if farmers have limited information on how climate change affects yields (misalignment in expectations), and particularly so under extreme climate change scenarios. In these more challenging cases, ex post payments perform well to increase low incomes when the risk is systemic like in Australia; Weather index performs well to reduce the welfare costs of risks when the correlation between yields and index is increased by the extreme events. The paper also analyses the robustness of different instruments in the face of limited knowledge of the probabilities of different climate change scenarios; highlighting that this added layer of uncertainty could be overcome to provide sound policy advice under uncertainties introduced by climate change. The role of providing information to farmers on impacts of climate change emerges as a crucial result of this paper as indicated by the significantly higher budgetary expenditures occurring across all instruments when farmers’ expectations are misaligned relative to actual impacts of climate change.     

Blocking in periodic valleys

Results are presented from a study of blocked flow (practically stagnant or recirculating light winds) in periodic valleys in thermally stably stratified ambient conditions. Inviscid and turbulent diffusion cases were modelled numerically to clarify the effects of turbulence on the blocking. The reflection of gravity waves from the top boundary of the hydrostatic model atmosphere was avoided by employing the radiation condition given by Klemp and Durran (1983). The dissipative numerical results are compared with new laboratory experiments which utilized the technique of Baines and Hoinka (1985) to simulate a semi-infinitely deep region.A criterion for the occurrence of blocked flow cannot be defined for the inviscid case except when the Froude number, Fr, based on the peak-to-trough ridge amplitude is less than about 0.4: then blocking is clearly identifiable before wave-breaking occurs. Breaking of waves is evident for Fr as large as 0.75, in agreement with analytical results given by Lilly and Klemp (1979).At small Froude number (Fr 0.5) in the dissipative flow simulations, blocked flow (stagnation) is present in the valleys, but a lee rotor (complete stagnation) is not evident. For order unity Froude numbers, blocking is a wave phenomenon, resulting from wave steepening and overturning or turbulent mixing. A finite thickness is brought to rest or participates in a recirculating flow when it first appears. A strong upward flow appears ahead of the rotor in the valleys, and the downslope wind over the windward side of the valleys is strengthened. Thus the present study shows that conditions for the onset of a rotor, and of stagnant flow, in periodic valleys are different.When blocked flow exists, the amplitudes of gravity waves in the upper layer are only 15% (Fr = 0.3) to 80% (Fr = 1.5) of those given by linear theory; this is supported by observations.     

Petrogenesis of the Kaikomagatake granitoid pluton in the Izu Collision Zone, central Japan: implications for transformation of juvenile oceanic arc into mature continental crust

The Miocene Kaikomagatake pluton is one of the Neogene granitoid plutons exposed in the Izu Collision Zone, which is where the juvenile Izu-Bonin oceanic arc is colliding against the mature Honshu arc. The pluton intrudes into the Cretaceous to Paleogene Shimanto accretionary complex of the Honshu arc along the Itoigawa-Shizuoka Tectonic Line, which is the collisional boundary between the two arcs. The pluton consists of hornblende–biotite granodiorite and biotite monzogranite, and has SiO₂ contents of 68–75 wt%. It has high-K series compositions, and its incompatible element abundances are comparable to the average upper continental crust. Major and trace element compositions of the pluton show well-defined chemical trends. The trends can be interpreted with a crystal fractionation model involving the removal of plagioclase, biotite, hornblende, quartz, apatite, and zircon from a potential parent magma with a composition of ~68 wt% SiO₂. The Sr isotopic compositions, together with the partial melting modeling results, suggest that the parent magma is derived by ~53% melting of a hybrid lower crustal source comprising ~30% Shimanto metasedimentary rocks of the Honshu arc and ~70% K-enriched basaltic rocks of the Izu-Bonin rear-arc region. Together with previous studies on the Izu Collision Zone granitoid plutons, the results of this study suggest that the chemical diversity within the parental magmas of the granitoid plutons reflects the chemical variation of basaltic sources (i.e., across-arc chemical variation in the Izu-Bonin arc), as well as a variable contribution of the metasedimentary component in the lower crustal source regions. In addition, the petrogenetic models of the Izu Collision Zone granitoid plutons collectively suggest that the contribution of the metasedimentary component is required to produce granitoid magma with compositions comparable to the average upper continental crust. The Izu Collision Zone plutons provide an exceptional example of the transformation of a juvenile oceanic arc into mature continental crust.     

Tetrad effects in REE abundance patterns of chondrules from CM meteorites: Implications for aqueous alteration on the CM parent asteroid

Lanthanide tetrad effect in bulk chondrules from two moderately altered CM chondrites, Murchison and Yamato-793321 (Y-793321), are reported for the first time. Twenty-three chondrules were petrographically characterized and analyzed for 10 rare earth elements (REE) and other trace and major elements (Ba, Sr, Rb, K, Ca, Mg and Fe) using the precise isotope dilution technique. The results indicate systematic depletion (several times) of alkali and alkaline earths compared to CV and CO chondrules. Most of the porphyritic olivine (8 PO) and olivine-pyroxene (4 POP), porphyritic and radial pyroxene (2 PP, 1 RP), and granular olivine (1 GO) chondrules show a light-REE (L-REE) depleted, heavy-REE (H-REE) smoothly fractionated pattern composed of four (upward convex) segments possessing a relatively large negative Eu anomaly (CI-normalized La/Sm, Lu/Er and Eu/Eu* ratios = 0.3-1: Eu*, normal value). On the other hand, all barred-olivine (5 BO) chondrules, a few PO and POP indicate almost a flat L-REE pattern. In addition, regardless of their textural types, nearly half of the chondrules have a variable degree of Ce and Yb anomalies, and/or L/H-REE discontinuity, which is similar to CV and CO chondrules. The observed L- and H-convex REE patterns accompanied with the negative Eu anomaly is the first known case for chondrules as well as meteoritic materials, but have been previously reported for geological samples such as sedimentary rocks, late stage igneous and metamorphic rocks, and are explained as the lanthanide tetrad effect, which plausibly results from fluid-rock interaction. We suggest that the marked REE fractionations occurred by the selective incorporation of L-, H-REEs and Eu into alteration products in the matrix during alteration processes on the CM parent body, but that the gas/solid REE fractionation characteristics established in the nebula have basically remained unchanged. We suggest that the tetrad effects observed here represent a new index of physico-chemical conditions of fluid-rock interactions prevalent on the CM parent body.     

Mineralogical and geochemical characteristics of hydrothermal alteration of basalt in the Kuroko mine area, Japan: implications for the evolution of a Back Arc Basin hydrothermal system

Basalt in the Furutobe District of the Kuroko mine area in Japan is characterized by abundant chlorite and epidote. Fluid inclusion studies indicate that chlorite is formed at lower temperatures (230–250°C) than epidote (250–280°C). The seawater/basalt mass ratio for the early chlorite-rich alteration was high (max. 40), but that for the later alteration was low (0.1–1.8). The CaO, Na₂O and SiO₂ of the bulk rock correlate negatively with MgO, while FeO and Σ Fe correlate positively with MgO. These changes in the characteristic features of hydrothermal alteration from early to late are generally similar to those for a mid-ocean ridge geothermal system accompanying basalt alteration.The MgO/FeO ratios of chlorite and actinolite and the Fe₂O₃ concentration of epidote from the basalt are greater than those of mid-ocean ridge basalt probably owing to the differences in the Fe₂O₃/FeO and MgO/FeO ratios of the parent rocks. The lower CaO concentration and the higher Na₂O concentration of the bulk rock compared with altered mid-ocean ridge basalt can be interpreted in terms of the difference in original bulk rock compositions.The Furutobe basalt, as well as other submarine back arc basalts, contains more vesicles filled with hydrothermal minerals (epidote, calcite, quartz, chlorite, pyrite) than do the mid-ocean ridge basalts. The abundance of vesicles plays an important role in controlling the secondary mineralogy and geochemistry of hydrothermally altered submarine back arc basin basalts.     

Sulfur Isotope Geochemistry of the Supergiant Xikuangshan Sb Deposit, Central Hunan, China: Constraints on Sources of Ore Constituents

Abstract. The supergiant Xikuangshan Sb deposit is located in the Middle to Upper Devonian limestone of central Hunan, China. Primary ores are composed of early-stage stibnite and calcite with rare pyrite, early main-stage stibnite and quartz, and late main-stage stibnite and calcite. New sulfur isotope data reveal the clustering of δ³⁴S values (+5 ∼ +8 %) for both early and late main-stage stibnite; a single early-stage stibnite exhibits δ³⁴S value (+7.5 %) identical to its main ore-stage counterparts and the coexisting calcite has almost unmodified carbon isotope composition (-4.4 %). The data suggest a probable common source of sulfur for stibnite that was deposited at different paragenetic stages. A much wider variation in δ³⁴S values for early main-stage stibnite (+3.5 to +16.3 %, av. +7.5 %) compared to that for late main-stage stibnite (+5.3 to +8.1 %, av. +6.2 %) can be interpreted to be due to local interaction of earlier ore fluid with Devonian host rocks. The previous studies show that the Precambrian basement contains elevated Sb concentrations, and two distinctive sulfur reservoirs with δ³⁴S_pyrite values at ca. +11 ∼ +24 % and -7.0 ∼-11 %. The homogenizing effect for sulfur hydrothermally leached from the two reservoirs might have provided ore constituents for the Xikuangshan fluids.     

Origin of a late Neoproterozoic (605 ± 13 Ma) intrusive carbonate–albitite complex in Southern Sinai, Egypt

New geochemical, isotopic, and geochronological data and interpretations are presented for late Neoproterozoic intrusive carbonates and related rocks of southern Sinai, Egypt (northernmost Arabian–Nubian Shield). The Tarr carbonates are coarsely crystalline and related to explosive emplacement of hypabyssal and volcanic albitite at 605 ± 13 Ma. The carbonates associated with the albitites are divisible into two types: primary dolomitite and secondary breunneritite (Fe-rich magnesite). The dolomitite was clearly intrusive but differs from classic igneous carbonatites, containing much lower abundances of incompatible elements, such as REE, U, Th, Rb, Nb, Y, P, Sr, Zr, Ba, and total alkalies. The breunneritite is a secondary replacement of dolomitite, probably marking the roots of a vigorous hydrothermal system. Albitites show pristine abundances of major and trace elements and were not subjected to a major metamorphic overprint. They are relatively more fractionated, alkaline and related to within-plate A-type magmas, were emplaced in an extensional or non-compressive tectonic regime in the cupola of high-level A-type granite. Tarr albitites may represent residual magma remaining after near-total crystallization of an A-type granite pluton at depth, forcibly emplaced into the roof above the cooling pluton. The intrusive dolomitite exsolved from highly differentiated albitite melt, in the apical regions of a still-buried alkaline “A-type” granite pluton that was rich in CO₂; these volatiles migrated upwards and towards the cooler margins of the magma body. Late NNE-SSW extension allowed a shallow-level cupola to form, into which albitite melts and carbonate fluids migrated, culminating in explosive emplacement of albitite breccia and intrusive carbonate. Isotopic compositions of Tarr dolomitite and albitite indicate these are consanguineous and ultimately of mantle origin. Magmatic volatiles fenitized the wall rock, while submarine hydrothermal activity transformed some of the dolomitite into breunneritite. Recognition of Tarr-type should encourage similar hypabyssal complex intrusions to be sought for in association with A-type granitic plutons elsewhere.     

Very high-density carbonic fluid inclusions in sapphirine-bearing granulites from Tonagh Island in the Archean Napier Complex, East Antarctica: implications for CO2 infiltration during ultrahigh-temperature (T>1,100 °C) metamorphism

The ultrahigh-temperature (UHT) metamorphism of the Napier Complex is characterized by the presence of dry mineral assemblages, the stability of which requires anhydrous conditions. Typically, the presence of the index mineral orthopyroxene in more than one lithology indicates that H₂O activities were substantially low. In this study, we investigate a suite of UHT rocks comprising quartzo-feldspathic garnet gneiss, sapphirine granulite, garnet-orthopyroxene gneiss, and magnetite-quartz gneiss from Tonagh Island. High Al contents in orthopyroxene from sapphirine granulite, the presence of an equilibrium sapphirine-quartz assemblage, mesoperthite in quartzo-feldspathic garnet gneiss, and an inverted pigeonite-augite assemblage in magnetite-quartz gneiss indicate that the peak temperature conditions were higher than 1,000 °C. Petrology, mineral phase equilibria, and pressure-temperature computations presented in this study indicate that the Tonagh Island granulites experienced maximum P-T conditions of up to 9 kbar and 1,100 °C, which are comparable with previous P-T estimates for Tonagh and East Tonagh Islands. The textures and mineral reactions preserved by these UHT rocks are consistent with an isobaric cooling (IBC) history probably following an counterclockwise P-T path. We document the occurrence of very high-density CO₂-rich fluid inclusions in the UHT rocks from Tonagh Island and characterize their nature, composition, and density from systematic petrographic and microthermometric studies. Our study shows the common presence of carbonic fluid inclusions entrapped within sapphirine, quartz, garnet and orthopyroxene. Analysed fluid inclusions in sapphirine, and some in garnet and quartz, were trapped during mineral growth at UHT conditions as 'primary' inclusions. The melting temperatures of fluids in most cases lie in the range of -56.3 to -57.2 °C, close to the triple point for pure CO₂ (-56.6 °C). The only exceptions are fluid inclusions in magnetite-quartz gneiss, which show slight depression in their melting temperatures (-56.7 to -57.8 °C) suggesting traces of additional fluid species such as N₂ in the dominantly CO₂-rich fluid. Homogenization of pure CO₂ inclusions in the quartzo-feldspathic garnet gneiss, sapphirine granulite, and garnet-orthopyroxene gneiss occurs into the liquid phase at temperatures in the range of -34.9 to +4.2 °C. This translates into very high CO₂ densities in the range of 0.95-1.07 g/cm³. In the garnet-orthopyroxene gneiss, the composition and density of inclusions in the different minerals show systematic variation, with highest homogenization temperatures (lowest density) yielded by inclusions in garnet, as against inclusions with lowest homogenization (high density) in quartz. This could be a reflection of continued recrystallization of quartz with entrapment of late fluids along the IBC path. Very high-density CO₂ inclusions in sapphirine associated with quartz in the Tonagh Island rocks provide potential evidence for the involvement of CO₂-rich fluids during extreme crustal temperatures associated with UHT metamorphism. The estimated CO₂ isochores for sapphirine granulite intersect the counterclockwise P-T trajectory of Tonagh Island rocks at around 6-9 kbar at 1,100 °C, which corresponds to the peak metamorphic conditions of this terrane derived from mineral phase equilibria, and the stability field of sapphirine + quartz. Therefore, we infer that CO₂ was the dominant fluid species present during the peak metamorphism in Tonagh Island, and interpret that the fluid inclusions preserve traces of the synmetamorphic fluid from the UHT event. The stability of anhydrous minerals, such as orthopyroxene, in the study area might have been achieved by the lowering of H₂O activity through the influx of CO₂ at peak metamorphic conditions (>1,100 °C). Our microthermometric data support a counterclockwise P-T path for the Napier Complex.     

Transformation textures,mechanisms of formation of high‐pressure minerals in shock melt veins of L6 chondrites,and pressure‐temperature conditions of the shock events

Abstract— The high‐pressure polymorphs of olivine, pyroxene, and plagioclase in or adjacent to shock melt veins (SMVs) in two L6 chondrites (Sahara 98222 and Yamato 74445) were investigated to clarify the related transformation mechanisms and to estimate the pressure‐temperature conditions of the shock events. Wadsleyite and jadeite were identified in Sahara 98222. Wadsleyite, ringwoodite, majorite, akimotoite, jadeite, and lingunite (NaAlSi₃O₈‐hollandite) were identified in Yamato 74445. Wadsleyite nucleated along the grain boundaries and fractures of original olivine. The nucleation and growth of ringwoodite occurred along the grain boundaries of original olivine, and as intracrystalline ringwoodite lamellae within original olivine. The nucleation and growth of majorite took place along the grain boundaries or fractures in original enstatite. Jadeite‐containing assemblages have complicated textures containing “particle‐like,” “stringer‐like,” and “polycrystalline‐like” phases. Coexistence of lingunite and jadeite‐containing assemblages shows a vein‐like texture. We discuss these transformation mechanisms based on our textural observations and chemical composition analyses. The shock pressure and temperature conditions in the SMVs of these meteorites were also estimated based on the mineral assemblages in the SMVs and in comparison with static high‐pressure experimental results as follows: 13–16 GPa, >1900 °C for Sahara 98222 and 17–24 GPa, >2100 °C for Yamato 74445.