A Case Study of CO<Subscript>2</Subscript>, CO and Particles Content Evolution in the Suburban Atmospheric Boundary Layer Using a 2-μm Doppler DIAL,a 1-μm Backscatter Lidar and an Array of In-situ Sensors

A network of remote and in-situ sensors was deployed in a Paris suburb in order to evaluate the mesoscale evolution of the daily cycle of CO₂ and related tracers in the atmospheric boundary layer (ABL) and its relation to ABL dynamics and nearby natural and anthropogenic sources and sinks. A 2-μm heterodyne Doppler differential absorption lidar, which combines measurements of, (1) structure of the atmosphere, (2) radial velocity, and (3) CO₂ differential absorption was a particularly unique element of the observational array. We analyse the differences in the diurnal cycle of CO, CO₂, lidar reflectivity (a proxy for aerosol content) and H₂O using the lidar, airborne measurements in the free troposphere and ground-based measurements made at two sites located few kilometres apart. We demonstrate that vertical mixing dominates the early morning drawdown of CO and aerosol content trapped in the former nocturnal layer but not the H₂O and CO₂ mixing ratio variations. Surface fluxes, vertical mixing and advection all contribute to the ABL CO₂ mixing ratio decrease during the morning transition, with the relative importance depending on the rate and timing of ABL rise. We also show evidence that when the ABL is stable, small-scale (0.1-km vertical and 1-km horizontal) gradients of CO₂ and CO are large. The results illustrate the complexity of inferring surface fluxes of CO₂ from atmospheric budgets in the stable boundary layer.     

Tree Coring as a Complement to Soil Gas Screening to Locate PCE and TCE Source Zones and Hot Spots

Preliminary risk assessment for prioritisation of site investigations requires efficient screening to reveal type and level of contamination. The screening methods, tree coring and soil gas sampling were applied and compared at two forested sites contaminated with tetrachloroethylene (PCE) or trichloroethylene (TCE) to evaluate their ability to locate source zones and contaminant hot spots. One test site represented a relatively homogeneous sandy soil and aquifer, and the second a more heterogeneous geology with both sandy and less permeable clay till layers overlying a chalk aquifer. Tree cores from different tree species were sampled and analysed, and compared to soil gas measurements and existing soil gas data. Both methods were found useful as screening tools to locate hot spots of PCE and TCE in the shallow subsurface. Tree coring was found to be particularly beneficial as a complement to soil gas sampling at sites with low permeable soils, and where contamination was located in the capillary rise or shallow groundwater. The shorter time required for tree coring reduced the costs compared to soil gas sampling, but the sensitivity and precision of tree coring were lower. However, this did not affect the feasibility of using tree coring to locate the hot spots. Moreover, a combination of the two methods can help to focus any subsequent investigations like soil or groundwater sampling. The use of tree coring to complement soil gas sampling for pre‐screening is expected to result in higher certainty for revealing hot spots and source zones at contaminated sites.     

Setting priorities for land management to mitigate climate change

Background

No consensus has been reached how to measure the effectiveness of climate change mitigation in the land-use sector and how to prioritize land use accordingly. We used the long-term cumulative and average sectorial C stocks in biomass, soil and products, C stock changes, the substitution of fossil energy and of energy-intensive products, and net present value (NPV) as evaluation criteria for the effectiveness of a hectare of productive land to mitigate climate change and produce economic returns. We evaluated land management options using real-life data of Thuringia, a region representative for central-western European conditions, and input from life cycle assessment, with a carbon-tracking model. We focused on solid biomass use for energy production.

Results

In forestry, the traditional timber production was most economically viable and most climate-friendly due to an assumed recycling rate of 80% of wood products for bioenergy. Intensification towards "pure bioenergy production" would reduce the average sectorial C stocks and the C substitution and would turn NPV negative. In the forest conservation (non-use) option, the sectorial C stocks increased by 52% against timber production, which was not compensated by foregone wood products and C substitution. Among the cropland options wheat for food with straw use for energy, whole cereals for energy, and short rotation coppice for bioenergy the latter was most climate-friendly. However, specific subsidies or incentives for perennials would be needed to favour this option.

Conclusions

When using the harvested products as materials prior to energy use there is no climate argument to support intensification by switching from sawn-wood timber production towards energy-wood in forestry systems. A legal framework would be needed to ensure that harvested products are first used for raw materials prior to energy use. Only an effective recycling of biomaterials frees land for long-term sustained C sequestration by conservation. Reuse cascades avoid additional emissions from shifting production or intensification.     

Thermobarometric data from a fossil zircon partial annealing zone in high pressure–low temperature rocks of eastern and central Crete, Greece

A fossil partial annealing zone of fission tracks in zircon is described from high pressure–low temperature (HP–LT) rocks of the Phyllite–Quartzite Unit (PQ) on the island of Crete, Greece. Correlation of regional trends in fission track age populations with independent thermobarometric and microstructural data, and with new experimental annealing results, allows a calibration of this low temperature thermochronological method to a degree hitherto not available from other field examples.The zircon fission track (FT) ages of samples from the PQ across Crete range from original detrital signature through reduced to completely reset. The annealing is the result of a single heating period related to the HP–LT metamorphism with near-peak temperatures lasting for only a few million years some time between 24±1 and 20±1 Ma. In eastern Crete, where rocks have experienced temperatures of 300±50 °C and pressures of 0.8±0.3 GPa, zircon FT ages range from 414±24 to 145±10 Ma. Ages above 300 Ma occur mostly near the east coast of the island in rocks which have not been heated to above ca. 280 °C and probably represent a pre-Variscan source. Track lengths are already indicative of a substantial annealing at this temperature. Most of the zircon FT ages from eastern Crete scatter within error around the stratigraphic age. Samples with apparent zircon FT ages significantly younger than the depositional age are only observed in areas where temperatures exceeded ca. 320 °C. Towards the west, a sudden decrease to very young ages ranging from 17±2 to 18±1 Ma reflects a complete resetting at ca. 350 °C. Short tracks, however, are still observed. Throughout the central and western part of the island, ages are consistently below 22 Ma. Thermobarometric data for this area indicate maximum temperatures of 400±50 °C and pressures of 1±0.3 GPa. Only samples from western Crete, which have been exposed to 400±50 °C, show exclusively long tracks. Consequently, the high temperature limit of the zircon partial annealing zone (ZPAZ) appears to be between 350 and 400 °C.A significant influence of elevated confining pressure on the stability of fission tracks in zircon is ruled out by the results of annealing experiments at 0.5 GPa and at different temperatures, which fit the curves previously obtained by other authors at ambient pressure.     

Radium isotopes in river sediments of Czech Republic

In the Czech Republic, river bottom sediments have been systematically monitored since 1999. In the paper, their radioactive contamination due to uranium mining and milling is assessed. The sediments samples were analyzed by gamma spectrometry. Especially the radium-226 and radium-228 activities were further evaluated.The highest values of the radium-226 activities were found at river profiles where the uranium industry impact was obvious. It turned out that the radium-226 and radium-228 activities ratio is more convenient to assess the level of radium-226 contamination than only the radium-226 activity itself. Based on this hypothesis, the sediment classification scheme for uranium industry contamination was suggested. The natural background activities of radium-226 and radium-228 in the Czech Republic were also evaluated. The case of radium-226 contamination due to the uranium industry was studied in details at the Ploučnice River.     

Rainwater composition over a rural area with special emphasis on the size distribution of insoluble particulate matter

The rainwater composition in the vicinity of Mainz, FRG, has been investigated with special emphasis on insoluble constituents. The number size distribution was determined in the range from 0.1 m up to 100 m radius. For particles with r>0.5 m radius the shape of the size distribution of insoluble particles in rain follows the shape of the average urban and rural aerosol. In this particular size range no major size selective removal processes could be seen. For r<0.5 m the number size distribution tends to flatten compared to the average aerosol. This might be the indication of a size selective removal process (Greenfield Gap).     

Microseismic activity in the Hellenic Volcanic Arc, Greece, with emphasis on the seismotectonic setting of the Santorini–Amorgos zone

The volcanic arc of the Hellenic subduction zone with its four volcanic centers is of major relevance when evaluating the seismovolcanic hazard for the Aegean region. We present results from a 22-station temporary seismic network (CYCNET) in the central Hellenic Volcanic Arc (HVA). CYCNET recordings allow to analyze the level and spatio-temporal evolution of microseismic activity in this region for the first time. A total of 2175 events recorded between September 2002 and July 2004 are analyzed using statistical methods, cluster analysis and relative relocation techniques. We identify distinct regions with significantly varying spatio-temporal behavior of microseismicity. A large portion of the seismic activity within the upper crust is associated with the presence of islands representing horst structures that were generated during the major Oligocene extensional phase. In contrast, the central part of the Cyclades metamorphic core complex remains aseismic considering our magnitude threshold of 1.8 except one spot where events occur swarm-like and with highly similar waveforms.The highest activity in the study area was identified along the SW–NE striking Santorini–Amorgos zone. Within this zone the submarine Columbo volcano exhibits strong temporal variations of seismic activity on a high background level. This activity is interpreted to be directly linked to the magma reservoir and therein the migration of magma and fluids towards the surface. NE of Columbo where no volcanic activity has yet been reported we observe a similar seismicity pattern with small-scaled activity spots that might represent local pathways of upward migrating fluids or even developing volcanic activity within this zone of crustal weakness. In contrast, the Santorini and Milos volcanic complexes do not show significant temporal variations and low to moderate background activity, respectively. Relating our results to the distribution of historical earthquakes and the GPS-derived horizontal velocity field we conclude that the Santorini–Amorgos zone is presently in the state of right-lateral transtension reflecting a major structural boundary of the volcanic arc subdividing it into a seismically and volcanically quiet western and an active eastern part.