Measuring and modelling temporal trends of 226Ra in waters of a Spanish estuary affected by the phosphate industry

The presence and temporal evolution (1990-2001) of (226)Ra in a tidal estuary affected by the phosphate industry has been investigated. Water samples collected in the course of four separate sampling campaigns were analysed for (226)Ra content using a gas flow proportional counter following Ba coprecipitation. Two (226)Ra sources have been identified: direct discharges from the industrial complex and run-off from a phosphogypsum pile. Although activity levels are similar, or even higher, than those found in other environments affected by the phosphate industry, there has been a general decrease in contamination since direct discharges ceased in 1998 due to new regulations from the EU. However, sediments are now acting as a source of Ra to the water column due to redissolution processes. A numerical model of the estuary has been developed to describe quantitatively the experimental results. The model solves the hydrodynamics and the dispersion equation of (226)Ra including interactions with sediments. Model results are, in general, in good agreement with observations.     

Comparison between Pollutant Concentration in the Samples of Fog and Rime Water Collected at Mt. Milešovka

The article aims at showing the differences in concentration of pollutants that are contained in the samples of fog and/or low cloud water in comparison with the water from rime. The results follow from the fog and rime measurements made at Mt. Mileovka (eské Stedohoí Mountains). They are compared with the results of other studies that also report the differences in fog and rime chemistry.     

The making of Stars 'R' Us!

The team behind a successful project to broaden the understanding of astrochemistry – Serena Viti, Wendy Brown, Martin McCoustra, Helen Fraser, Nigel Mason and Robert Massey – recount how they went about it and what benefits resulted.     

The effect of thermal treatment on the 57Fe Mössbauer spectrum of beryl

Mössbauer spectra (MS) of blue, green and yellow beryl (ideally Be₃Al₂Si₆O₁₈) containing approximately 1% of iron were obtained at 295 and 500 K. Room temperature (RT) spectra of both blue and green samples showed the presence of an asymmetric Fe²⁺ doublet (ΔE _Q~2.7 mm/s, δ~1.1 mm/s), with a very broad low-velocity peak. There is no clear evidence for the presence of a ferric component. The MS of the yellow sample at RT consists of an intense central absorption with parameters typical for Fe³⁺ (ΔE _Q~0.4 mm/s, δ~0.29 mm/s), plus an apparently symmetrical Fe²⁺ doublet. This sample acquires a light-blue shade upon heating in air at about 620 K. Thermal treatments at high temperatures caused no significant changes in the MS, but the green and yellow beryl acquire a blue colour. All these results are interpreted in relation to the existence of channel water and the distribution of iron among the available crystallographic sites.     

Resilience and brittleness in the ALERTA RIO system: a field study about the decision-making of forecasters

Natural disasters, particularly those triggered by heavy rainfall, may cause major damage and death. However, if an accurate early warning is issued, the damage can be mitigated. In Latin America and Brazil, characteristics of socioeconomic development often lead to a disorderly growth of cities and, consequently, occupation and irregular construction in risk areas. Therefore, forecasts of heavy rainfall, as well as preventative and mitigatory actions based on meteorological data/alerts, are essential to saving lives and minimizing material loss. An event that would have benefited from such actions is that which occurred in the mountainous region of Rio de Janeiro in January 2011, when over 800 people lost their lives. This work describes the first research initiative on resilience engineering domain in systems to forecast heavy rains in Rio de Janeiro. The results indicate important sources of brittleness in the system that supports the work of meteorologists, mainly related to the technical and organizational framework, and suggests that the main source of resilience in dealing with critical situations is the tacit knowledge of experts.     

On the detailed magnetostratigraphy of greigite — (Smythite) mineralization,Sokolov Brown-Coal Basin,bohemia

Summary In the Middle Miocene claystones containing fossil micro-organic matter and overlying the brown-coal seams in the Jii quarry of the Sokolov Brown-Coal Basin, a strongly magnetic layer was found and subjected to detailed palaeomagnetic investigations. The principal carrier of magnetism in this bed (called Kocián's bed) is the ferrimagnetic mineralization of greigite or greigitesmythite showing pronounced metastable properties. This mineralization must be treated with caution during laboratory tests aimed at deriving palaeomagnetic directions. In Kocián's bed, about two metres thick, two zones of palaeomagnetic field transition were identified. The high degree of demagnetization achieved by using thermal stepwise procedures and a MAVACS apparatus enabled the origin of the self-reversal of remanence to be defined after heating to 360°C. The process of chemo-remanent magnetization of the authigenic greigite-(smythite) mineralization fossilizing the palaeomagnetic field was relatively fast; the transition of the palaeomagnetic field is recorded in layers not exceeding a thickness of 2 × 10^–2 m.Presented at 2nd conference on New Trends in Geomagnetism, Castle of Bechyn, Czechoslovakia, September 24–29, 1990.     

电离层水平不均匀性对无线电掩星资料反演的影响

电离层水平不均匀结构是引起掩星资料反演的主要误差源.本文模拟不均匀结构对无线电掩星资料反演的影响.首先利用3-D全球射线追踪技术进行了模拟.结果指出:电离层电子密度20%的变化可能引起GPS的时延增加约12m.其次,将90%的掩星时延对应的路径长度,定义为电离层掩星测量的水平分辨率,其值为1200-2000 km.最后,计算了不同纬度电离层当地正午、子夜和日出时的电离层水平不对称指数.它表明:低纬夏季日出时,不对称指数达-78%,反演结果可能有较大误差.     

Post glacial lacustrine event sedimentation in an ancient mountain setting: Carboniferous Lake Malanzán (Western Argentina)

Lacustrine deposits of the Malanzán Formation record sedimentation in a small and narrow mountain paleovalley. Lake Malanzán was one of several water bodies formed in the Paganzo Basin during the Late Carboniferous deglaciation. Five sedimentary facies have been recognized. Facies A (Dropstones-bearing laminated mudstones) records deposition from suspension fall-out and probably underflow currents coupled with ice-rafting processes in a basin lake setting. Facies B (Ripple cross-laminated sandstones and siltstones) was deposited from low density turbidity currents in a lobe fringe environment. Facies C (Massive or graded sandstones) is thought to represent sedimentation from high and low density turbidity currents in sand lobes. Facies D (Folded sandstones and siltstones) was formed from slumping in proximal lobe environments. Facies E (Wave-rippled sandstones) records wave reworking of sands supplied by turbidity currents above wave base level.The Lake Malanzán succession is formed by stacked turbidite sand lobe deposits. These lobes were probably formed in proximal lacustrine settings, most likely relatively high gradient slopes. Paleocurrents indicate a dominant direction from cratonic areas to the WSW. Although the overall sequence shows a regressive trend from basin fine-grained deposits to deltaic and braided fluvial facies, individual lobe packages lack of definite vertical trends in bed thickness and grain size. This fact suggests aggradation from multiple-point sources, rather than progradation from single-point sources. Sedimentologic and paleoecologic evidence indicate high depositional rate and sediment supply. Deposition within the lake was largely dominated by event sedimentation. Low diversity trace fossil assemblages of opportunistic invertebrates indicate recolonization of event beds under stressed conditions.Three stages of lake evolutionary history have been distinguished. The vertical replacement of braided fluvial deposits by basinal facies indicates high subsidence and a lacustrine transgressive episode. This flooding event was probably linked to a notable base level rise during postglacial times. The second evolutionary stage was typified by the formation of sand turbidite lobes from downslope mass-movements. Lake history culminates with the progradation of deltaic and braided fluvial systems     

Tertiary alkaline Roztoky Intrusive Complex, České středohoří Mts., Czech Republic: petrogenetic characteristics

The ?eské st?edoho?í Mts. is the dominant volcanic center of the Oh?e (Eger) rift zone. It hosts the Roztoky Intrusive Complex (RIC), which is made up of a caldera vent and intrusions of 33–28-Ma-old hypabyssal bodies of essexite–monzodiorite–sodalite syenite series accompanied by a radially oriented 30–25-Ma-old dike swarm comprising about 1,000 dikes. The hypabyssal rocks are mildly alkaline mostly foid-bearing types of mafic to intermediate compositions. The dike swarm consists of chemically mildly alkaline and rare strongly alkaline rocks (tinguaites). The geochemical signatures of the mildly alkaline hypabyssal and associated dike rocks of the RIC are consistent with HIMU mantle sources and contributions from lithospheric mantle. The compositional variations of essexite and monzodiorite can be best explained by fractional crystallization of parent magma without significant contributions of crustal material. On the other hand, the composition of monzosyenite, leuco-monzodiorite and sodalite syenite reflects fractional crystallization coupled with variable degrees of crustal assimilation. It is suggested that the parent magmas in the Oh?e rift were produced by an adiabatic decompression melting of ambient upper mantle in response to lithospheric extension associated with the Alpine Orogeny.     

Two Experimental Methods to Determine the Speciation of Cadmium in Sediment from the River Neckar

The binding forms of Cd to an anaerobic sediment of low sulfide content from Lauffen reservoir (River Neckar, Germany) were studied using two different approaches, i. e. sequential extraction (modified from published protocols) and titrimetric study of the pH-dependent Cd release. Thermodynamic equilibrium calculations were applied to calculate both the release pattern of Cd during the titrations and the speciation of Cd within the single fractions of the extraction protocol. The calculations were based on measured sediment parameters such as hydrous ferric oxide (HFO), acid volatile sulfide, carbonate content and total Cd content, and the extractants (oxalate, acid etc.) used. The results of the two independent approaches coincided well in that they both assigned more than two thirds of the total Cd content to be adsorbed to organic matter. Cd bound as CdS is of little importance. Sequential extraction after a 3-month oxidation period at pH 7 revealed a shift of Cd from being mainly bound in stronger surface complexes with organic matter to being mainly bound in weaker surface complexes with organic matter and HFO, and thus becoming more bioavailable. This study suggests that the use of sequential extraction although being frequently criticized due to its operational character can be used to determine binding forms of metal ions if they are accompanied by 1) careful supporting experiments, 2) analysis of important sediment parameters, and 3) the use of thermodynamic equlibrium models which can help to understand Cd speciation within the extraction fractions.