Antenna design and implementation for the future space Ultra-Long wavelength radio telescope

In radio astronomy, the Ultra-Long Wavelengths (ULW) regime of longer than 10 m (frequencies below 30 MHz), remains the last virtually unexplored window of the celestial electromagnetic spectrum. The strength of the science case for extending radio astronomy into the ULW window is growing. However, the opaqueness of the Earth’s ionosphere makes ULW observations by ground-based facilities practically impossible. Furthermore, the ULW spectrum is full of anthropogenic radio frequency interference (RFI). The only radical solution for both problems is in placing an ULW astronomy facility in space. We present a concept of a key element of a space-borne ULW array facility, an antenna that addresses radio astronomical specifications. A tripole–type antenna and amplifier are analysed as a solution for ULW implementation. A receiver system with a low power dissipation is discussed as well. The active antenna is optimized to operate at the noise level defined by the celestial emission in the frequency band 1 ? 30 MHz. Field experiments with a prototype tripole antenna enabled estimates of the system noise temperature. They indicated that the proposed concept meets the requirements of a space-borne ULW array facility.     

Astrometry from space: GAIA and planet detection

The proposed baseline GAIA mission will be able to detect the astrometric signature of Jupiter-size planets around of the order of a million stars, using either global or narrow-angle astrometry. If the mission can realize the higher astrometric accuracy that photon statistics allows for bright stars, lower-mass planets (from Earth size to ten times larger) can be found around ten to a few hundred stars.     

Aerial electromagnetic sounding of the lithosphere of Venus

Electromagnetic (EM) investigation depths are larger on Venus than Earth due to the dearth of water in rocks, in spite of higher temperatures. Whistlers detected by Venus Express proved that lightning is present, so the Schumann resonances ～10–40 Hz may provide a global source of electromagnetic energy that penetrates ～10–100 km. Electrical conductivity will be sensitive at these depths to temperature structure and hence thermal lithospheric thickness. Using 1D analytic and 2D numerical models, we demonstrate that the Schumann resonances—transverse EM waves in the ground-ionosphere waveguide—remain sensitive at all altitudes to the properties of the boundaries. This is in marked contrast to other EM methods in which sensitivity to the ground falls off sharply with altitude. We develop a 1D analytical model for aerial EM sounding that treats the electrical properties of the subsurface (thermal gradient, water content, and presence of conductive crust) and ionosphere, and the effects of both random errors and biases that can influence the measurements. We initially consider specified 1D lithospheric thicknesses 100–500 km, but we turn to 2D convection models with Newtonian temperature-dependent viscosity to provide representative vertical and lateral temperature variations. We invert for the conductivity-depth structure and then temperature gradient. For a dry Venus, we find that the error on temperature gradient obtained from any single local measurement is ～100%—perhaps enough to distinguish “thick” vs. “thin” lithospheres. When averaging over thousands of kilometers, however, the standard deviation of the recovered thermal gradient is within the natural variability of the convection models, <25%. A “wet” interior (hundreds of ppm H₂O) limits EM sounding depths using the Schumann resonances to <20 km, and errors are too large to estimate lithospheric properties. A 30-km conductive crust has little influence on the dry-interior models because the Schumann penetration depths are significantly larger. We conclude that EM sounding of the interior of Venus is feasible from a 55-km high balloon. Lithospheric thickness can be measured if the upper-mantle water content is low. If H₂O at hundreds of ppm is present, the deeper, temperature-sensitive structure is screened, but the “wet” nature of the upper mantle, as well as structure of the upper crust, is revealed.     

Multipoint observations of low latitude ULF Pc3 waves in south-east Australia

Geomagnetic pulsations recorded on the ground are the signatures of the integrated signals from the magnetosphere. Pc3 geomagnetic pulsations are quasi-sinusoidal variations in the earth’s magnetic field in the period range 10–45 seconds. The magnitude of these pulsations ranges from fraction of a nT (nano Tesla) to several nT. These pulsations can be observed in a number of ways. However, the application of ground-based magnetometer arrays has proven to be one of the most successful methods of studying the spatial structure of hydromagnetic waves in the earth’s magnetosphere. The solar wind provides the energy for the earth’s magnetospheric processes. Pc3–5 geomagnetic pulsations can be generated either externally or internally with respect to the magnetosphere. The Pc3 studies undertaken in the past have been confined to middle and high latitudes. The spatial and temporal variations observed in Pc3 occurrence are of vital importance because they provide evidence which can be directly related to wave generation mechanisms both inside and external to the magnetosphere. At low latitudes (L < 3) wave energy predominates in the Pc3 band and the spatial characteristics of these pulsations have received little attention in the past. An array of four low latitude induction coil magnetometers were established in south-east Australia over a longitudinal range of 17 degrees at L = 1.8 to 2.7 for carrying out the study of the effect of the solar wind velocity on these pulsations. Digital dynamic spectra showing Pc3 pulsation activity over a period of about six months have been used to evaluate Pc3 pulsation occurrence. Pc3 occurrence probability at low latitudes has been found to be dominant for the solar wind velocity in the range 400–700 km/s. The results suggest that solar wind controls Pc3 occurrence through a mechanism in which Pc3 wave energy is convected through the magnetosheath and coupled to the standing oscillations of magnetospheric field lines.     

Development of a GIS-based catastrophe theory model (modified DRASTIC model) for groundwater vulnerability assessment

This study developed a new paradigm for groundwater vulnerability assessment by modifying the standard DRASTIC index (DI) model based on catastrophe theory. The developed paradigm was called the catastrophe theory-based DI (CDI) model. The proposed model was applied to assess groundwater vulnerability to pollution index (GVPI) in Perak Province, Malaysia. The area vulnerability index was modeled by considering the DRASTIC multiple vulnerability causative factors (VCFs) obtained from different data sources. The weights and ranking of the VCFs were computed by using the inner fuzzy membership mechanism of the CDI model. The estimated vulnerability index values of the CDI model were processed in a geographic information system (GIS) environment to produce a catastrophe theory–DRASTIC groundwater vulnerability to pollution index (CDGVPI) map, which demarcated the area into five vulnerability zones. The produced CDGVPI map was validated by applying the water quality status–vulnerability zone relationship (WVR) approach and the relative operating characteristic (ROC) curve method. The performance of the developed CDI model was compared with that of the standard DI model. The validation results of the WVR approach exhibits 89.29% prediction accuracy for the CDI model compared with 75% for the DI model. Meanwhile, the ROC validation results for the CDI and DI models are 88.8% and 78%, respectively. The GIS-based CDI model demonstrated better performance than the DI model. The GVPI maps produced in this study can be used for precise decision making process in environmental planning and groundwater management.     

Crystal field stabilization energies of almandine-pyrope and almandine-spessartine garnets determined by FTIR near infrared measurements

The band positions of three partially overlapping Fe²⁺ spin-allowed transitions located between 4000 and 9000 cm^–1 in almandine-pyrope and almandinespessartine garnets solid solutions were measured using near-infrared (NIR) spectroscopy. The crystal field stabilization energies (CFSE) along both binaries were calculated assuming a splitting of 1100 cm^–1 for the lower orbitals. The CFSE show a slight increase along the almandine-spessartine binary from 3730 to 3810 cm^–1 and a larger increase from 3730 to 3970 cm^–1 for the almandine-pyrope binary. Dodecahedral Fe²⁺-site distortion increases with an increase in spessartine component and decreases with increasing pyrope component, in agreement with average dodecahedral site distortions determined from diffraction experiments. The excess CFSE's along both joins are negative. For the almandinespessartine binary they are small, but are about 3.5 times larger in magnitude along the join almandine-pyrope, where an interaction parameter of W= -2.9 KJ/mole has been derived from a symmetric mixing model. The excess CFSE are relatively small compared to the magnitudes of the excess enthalpies of mixing that have been assigned to garnet solid solutions. Moreover, they give no indication which could support the positive and asymmetric excess enthalpies of mixing that have been proposed for almandine-pyrope solid solutions.     

The evolution of the z distribution of normal neutron stars in the Galaxy

Under the two initial 1‐D one parameter velocity distribution forms (one is normal, the other is exponential), the z direction scale height evolution of normal neutron stars in the Galaxy is studied by numerical simulation. We do statistics for the cases at different time segments, also do statistics for the cumulative cases made of each time segment. The results show in the cumulative cases the evolution curves of the scale heights are smoother than in the each time segment, i.e., the cumulation improve the signal‐to‐noise ratio. Certainly the evolution cases are different at different Galactic disk locations, which also have very large difference from the average cases in the whole disk. In the initial stages of z evolution of normal neutron stars, after the beginning transient states, the cumulative scale heights increase linearly with time, and the cumulative scale height increasing rates have linear relationship with the initial velocity distribution parameters, which have larger fluctuation in the vicinity of the Sun than in the whole disk. We utilize the linear relationship of the cumulative scale height increasing rates vs. the initial velocity distribution parameters in the vicinity of the Sun to make comparison with the observation near the Sun. The results show if there is no magnetic decay, then the deserved initial velocity parameters are obvious lower than the present well known results from some authors; whereas if introducing magnetic decay, for the 1‐D normal case we can make consistence among concerning results using magnetic decay time values which are supported by some authors, while for the 1‐D exponential case the results show the lackness of young pulsar samples in the larger z in the vicinity of the Sun (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Planning and Scheduling of Payloads of AstroSat During Initial and Normal Phase Observations

On 28th September 2015, India launched its first astronomical space observatory AstroSat, successfully. AstroSat carried five astronomy payloads, namely, (i) Cadmium Zinc Telluride Imager (CZTI), (ii) Large Area X-ray Proportional Counter (LAXPC), (iii) Soft X-ray Telescope (SXT), (iv) Ultra Violet Imaging Telescope (UVIT) and (v) Scanning Sky Monitor (SSM) and therefore, has the capability to observe celestial objects in multi-wavelength. Four of the payloads are co-aligned along the positive roll axis of the spacecraft and the remaining one is placed along the positive yaw axis direction. All the payloads are sensitive to bright objects and specifically, require avoiding bright Sun within a safe zone of their bore axes in orbit. Further, there are other operational constraints both from spacecraft side and payloads side which are to be strictly enforced during operations. Even on-orbit spacecraft manoeuvres are constrained to about two of the axes in order to avoid bright Sun within this safe zone and a special constrained manoeuvre is exercised during manoeuvres. The planning and scheduling of the payloads during the Performance Verification (PV) phase was carried out in semi-autonomous/manual mode and a complete automation is exercised for normal phase/Guaranteed Time Observation (GuTO) operations. The process is found to be labour intensive and several operational software tools, encompassing spacecraft sub-systems, on-orbit, domain and environmental constraints, were built-in and interacted with the scheduling tool for appropriate decision-making and science scheduling. The procedural details of the complex scheduling of a multi-wavelength astronomy space observatory and their working in PV phase and in normal/GuTO phases are presented in this paper.     

The frequency of wide binaries among the southern barium stars

Summary All of the barium and marginal barium stars in the 1972 MacConnell, Frey, and Upgren (1972: MFU) list of such objects which are located south of the celestial equator were examined for visual duplicity. Over 200 objects were observed, and a total of six possible candidates for wide pair visual binaries were found. Of these, four are most likely optical in nature. These data suggest that the incidence of wide binaries among barium stars is of the order of 1%.