Dynamics of grains falling on a sloping granular medium: application to the evolution of a talus

Numerous field surveys have provided quantitative information on the characteristics of talus deposits. Much less has been done to quantify the basic dynamics processes of blocks involved in talus evolution. In this work, we perform a set of experiments at the reduced scale of some metres using an inclined board covered with a loose granular medium. The complexity of the processes forming a talus is simplified by studying the interaction of only two kinds of grain sizes at a time. Grains of one class size are dropped from a fixed height onto the board covered by a layer of grains of a different class size, and their final distribution is recorded. We find that when small grains fall on large grains, the granular abundance decreases rapidly as a function of the distance from the fall point, which is explained by the effect of multiple bouncing on the irregular surface. In contrast, large grains falling on a bed of smaller grains lose much more energy at impact. They may stop at once, or roll down slope, often reaching the whole board length; as a consequence, their abundance peaks in the fall zone and at the change of slope. Experiments also show that grains travel longer with increasing fall height and sloping angle. The results clarify in a physical manner one mechanism that might explain why large blocks are typically found in the distal part of a talus slope, while smaller blocks remain near the fall zone. Based on these and previous experiments, a schematic view of talus evolution is discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Regional and global effects of southern ocean constraints in a global model

Global ocean circulation models do not usually take high-latitude processes into account in an adequate form due to a limited model domain or insufficient resolution. Without the processes in key areas contributing to the lower part of the global thermohaline circulation, the characteristics and flow of deep and bottom waters often remain unrealistic in these models. In this study, various sections of the Bremerhaven Regional Ice Ocean Simulation model results are combined with a global inverse model by using temperature, salinity, and velocity constraints for the Hamburg Large Scale Geostrophic ocean general circulation model. The differences between the global model with and without additional constraints from the regional model demonstrate that the Weddell Sea circulation exerts a significant influence on the course of the Antarctic Circumpolar Current with consequences for Southern Ocean water mass characteristics and the spreading of deep and bottom waters in the South Atlantic. The influence of the Ross Sea is found to be less important in terms of global influences. However, regional changes in the Pacific sector of the Southern Ocean are found to be of Ross Sea origin. The additional constraints change the hydrographic conditions of the global model in the vicinity of the Antarctic Circumpolar Current in such a way that transport values, e.g., in Drake Passage no longer need to be prescribed to obtain observed transports. These changes not only improve the path and transport of the Antarctic Circumpolar Current but affect the meso- and large-scale circulation. With a higher (lower) mean Drake Passage transport, the mean Weddell Gyre transport is lower (higher). Furthermore, an increase (decrease) in the Antarctic Circumpolar Current leads to a decrease (increase) of the circum-Australian flow, i.e., a decrease (increase) of the Indonesian Throughflow.     

Single element and competitive sorption of copper, zinc and lead onto a Luvisol profile

The sorption parameters of Cu, Zn and Pb are related to the composition of the different genetic horizons of a Luvisol profile in batch sorption experiments. The affinities of metals towards the soil samples from different horizons followed the same sequence, e.g. Pb≥C>>Zn. By far the highest metal retention was found in the C_k horizon due to the alkaline conditions. It is followed by the A horizon with its high organic matter content, while the lowest sorption capacity was found in the Bt horizon. In the horizons free of carbonate, primarily Pb and Cu were immobilized. The studied soil can be characterized by high amount of organic matter, clay accumulation horizon, as well as calcareous subsoil. This kind of profile development makes soils able to immobilize a significant metal pollution.     

The influence of a stratified rheology on the flexural response of the lithosphere to (un)loading by extensional faulting

We present a two-layered finite difference model for the flexural response of the lithosphere to extensional faulting. The model allows for three modes of flexure: (1) fully coupled, with the upper crust and mantle welded together by the lower crust; (2) fully decoupled, with the upper crust and mantle behaving as independent layers; and (3) partly decoupled, signifying that the response of the upper crust to small-wavelength loads is superimposed on the response of the entire lithosphere to long-wavelength loads. Which of these modes of flexure is to be expected depends on the rheology and especially the thermal state of the lithosphere. Coupled behaviour is related to a cold and strong lithosphere. The Baikal Rift Zone provides a typical example for this mode of flexure. A fully decoupled lithosphere is an exceptional case, related to anomalous high temperatures in the lower crust, and is observed in the Basin and Range province. The most common case is a partly decoupled lithosphere, with the degree of decoupling depending on the thickness and viscosity of the lower crust. This is inferred, for example, for the Bay of Biscay margin.     

The Todagin Creek landslide of October 3, 2006, Northwest British Columbia, Canada

The Todagin Creek landslide is located at 57.61° N 129.98° W in Northwest British Columbia. A seismic station 90 km north of the landslide recorded the event at 1643 hours coordinated universal time (UTC; 0943 hours Pacific daylight time (PDT)) on October 3, 2006. The signal verifies the discovery and relative time bounds provided by a hunting party in the valley. The landslide initiated as a translational rock slide on sedimentary rock dipping down slope at 34° and striking parallel to the valley. The landslide transformed into a debris avalanche and had a total volume estimated at 4 Mm³. An elevation drop of 771 m along a planar length of 1,885 m resulted in a travel angle (fahrb?schung) of 21.3°. The narrowest part of the landslide through the transport zone is 345 m. The widest part of the divergent toe of the landslide reaches a width of 1,010 m. Landslide debris impounded a lake of approximately 32 ha and destroyed an additional 67 ha of forest. The impoundment took 7 to 10 days to fill, with muddied waters observed downstream on October 13. No clear linkage exists with precipitation and temperature records preceding the landslide, but strong diurnal temperature cycles occurred in the days prior to the event. The Todagin Creek area appears to have an affinity for large landslides with the deposits of three other landslides >5 Mm³ observed in the valley.     

Crustal structure in the Carpatho-Pannonian region: insights from three-dimensional gravity modelling and their geodynamic significance

A three-dimensional gravity modelling of the Carpatho-Pannonian region was carried out to get a better image of the Moho boundary and the most prominent intra-crustal density heterogeneities. At first, only the major density boundaries were considered: the bottom of the Tertiary basin fill, the Moho discontinuity and the lithosphere to asthenosphere boundary. Density contrasts were represented by relative densities. The improved density model shows a transitional unit of high density at the base of the crust along the Teisseyre-Tornquist Zone. In the Western Carpathians, an extensive, relatively low-density unit was inferred in mid-crustal levels. The border zone between the Southern Carpathians and the Transylvanian basin is characterized by a sharp, step-like contact of the two crustal units. The Moho configuration reveals important information on the tectonic evolution of the region. Zones of continental collision are represented by thick Moho roots (Eastern Alps, Eastern Carpathians). Transpressional orogenic segments, however, are different: in the Western Carpathians, the Moho is a flat surface; in the Dinarides, a medium Moho root is observed; the Southern Carpathians are characterized by a thick crustal root. The differences are explained with the presence or absence of “subductible” oceanic crust along the Carpathians during the extrusion of Pannonian blocks.     

Combination of common-midpoint-refraction seismics with the generalized reciprocal method

A useful method for increasing the signal/noise ratio of refracted waves is Common-Midpoint (CMP)-refraction seismics. With this technique the shallow underground can be described in detail using all information (amplitude, frequency, phase characteristics) of the wavetrain following the first break (first-break phase). Thus, the layering can be determined and faults, weak zones, and clefts can be identified. This paper deals with the optimization of CMP-refraction seismics used in combination with the Generalized Reciprocal Method (GRM). Theoretical studies show a close relationship of both methods to the kinematics of wave propagation. Velocities and optimum offsets determined by the GRM can be used directly in the partial Radon transformation in CMP-refraction seismics. The integration of refracted waves leads to an increase in the signal/noise ratio but simultaneously the integration boundaries must be restricted to deal only with selective parts of the investigated refractor. The result of this process is an intercept-time section which can be converted directly to a depth section using standard refraction seismic techniques. Another possibility of depth conversion is the transformation of this intercept-time section to a `pseudo-zero-offset section', known from reflection seismics. Thus, zero-offset sections can be migrated using wave-equation techniques such as Kirchhoff migration.     

Sources of recent tectonic stress in the Pannonian region:inferences from finite element modelling

We present the results of finite element modelling of the recent stress field in the Pannonian basin and surrounding Alpine orogenic belt. Our results show that the recent, predominantly compressive, stress regime in the Alpine–Pannonian–Carpathian–Dinaric system is governed by distinct tectonic factors. Of great importance is the deformation of crustal blocks with different geometries and rigidities in an overall convergent setting associated with the Africa–Europe collision. The most important stress source appears to be the counterclockwise rotation of the Adriatic microplate at the southwest boundary of the Pannonian basin. This plate tectonic unit has been interpreted as moving independently of both the European plate and the African plate. Additional boundary conditions—active shortening and compression in the Vrancea zone and the Bohemian Massif, and the effect of the immobile Moesian Platform—also significantly influence the modelling results. The incorporation of additional stress sources such as crustal thickness variation and the presence of two main fault zones separating the primary tectonic units in the study area have only locally important effects but improve the fit between the calculated results and the observed stress pattern.     

Differential rotation,meridional and random motions of the solar Ca+ network

From high precision computer controlled tracings of bright Ca⁺-mottles we investigated differential rotation, meridional and random motions of these chromospheric fine structures. The equatorial angular velocity of the Ca⁺-mottles agrees well with that of sunspots (14°.50 per day, sidereal) and is 5 % higher than for the photosphere. The slowing down with increasing latitude is larger than for sunspots. Hence in higher latitudes Ca⁺-mottles rotate as fast as the photospheric plasma. A systematic meridional motion of about 0.1 km s^–1 for latitudes around 10° was found. The Ca⁺-mottles show horizontal random motions due to the supergranular flow pattern with an rms velocity of about 0.15 km s^–1. We finally investigated the correctness of the solar rotation elements i and derived by Carrington (1863).     

Magnetic susceptibility as a possible correlation tool in Quaternary alluvial stratigraphy

Correlation of the fluvial magnetic susceptibility (MS) record of borehole Devavanya‐1 in the Körös Basin (eastern Hungary) with Chinese aeolian MS records (Jingbian, Lingtai) and the marine δ¹⁸O record from the Equatorial Pacific (V28‐239) is established here based on cross‐correlations and singular spectral analysis. A basin‐scale well‐to‐well correlation based on magnetic susceptibility records was also performed involving unpublished cores. To refine the age model, a Monte Carlo simulation was conducted using the Chinese Jingbian section as a tuning target. Spectral analysis of the tuned record revealed c. 400, c. 100 and c. 41 ka cycles over the 2.5 million years of the Quaternary fluvial succession. To ensure a complementary palaeoclimate proxy, the full width at half maximum of smectites was measured as a facies‐independent indicator of weathering intensity. This investigation was carried out on a subset of samples involved in MS measurements representing a c. 400 ka time interval across the top of the Olduvai subchron. A phase‐shift between MS and weathering intensity recorded in the clay mineralogy indicates different response times of the considered proxies. The fluvial MS record is determined by the climatic control on delivery and preservation of magnetic minerals, mainly of magnetite. Under cold‐and‐dry climate these minerals were released owing to frost shattering in the adjacent hinterlands and were transported to alluvial plains in the early postglacial periods thanks to the increasing discharge of rivers. With further warming the weathering‐sensitive magnetic minerals soon disappeared from the soils of the catchment area and thus from the fluvial load. As a result, in fluvial successions early postglacial warmings are expressed by the occurrences of MS maxima (magnetic episodes), while the palaeotemperature maximum and the subsequent cooling remain concealed within the tract of low MS values. The early postglacial magnetic episodes may serve as ideal stratigraphical markers in regional and global correlations.