Medium-term responses of rocky bottoms to sewage discharges from a deepwater outfall in the NE Atlantic

An investigation on the effects of deepwater outfall discharges on the status of rocky reef communities was carried out. The sanitation system was found to be an environmentally suitable option for the protection of those habitats situated in high energy coastal environments. Sediments occurring between the predominating rocky substrates showed low values of the fine fraction (<63microm) and organic matter content. In addition, high average concentrations of Cd, Hg and Zn were found in these sediments, though these values were similar to those registered in non-affected sites, far away from the outfall. On the other hand, those assemblages typical of hard substrates that settled near the outfall showed an increase in total richness and abundance of macroinvertebrates. Moreover, the average number of species of each taxonomic group, a good indicator of the maintenance of the previous trophic structure, only varied considerably over time at the rip-rap protection. In a global context, those changes were not directly related to the discharge disturbances, but to the natural variability or the successional processes occurring within those communities. Only communities dwelling in the rip-rap protection area were affected by the proximity of the discharges.     

Geomorphological,stratigraphic and geochronological evidence of fast Pleistocene coastal uplift in the westernmost part of the Corinth Gulf Rift (Greece)

Rapid extension and active normal faulting in the western extremity of the Corinth Gulf are accompanied by fast coastal uplift. We investigate Pleistocene uplift west of Aigion, by attempting to date remains of marine terraces and sedimentary sequences by calcareous nannoplankton and U‐series analyses. Net uplift initiated recently, due to abandonment of an older rift‐bounding fault zone and increase in activity on the presently active, coastal fault zone. This change apparently coincides with an abrupt slow down (or, termination) of secondary fault block tilting within the broader hangingwall block of the older zone, indicated by an angular unconformity that dates in the early part of MIS10 (∼390–350 ka BP, preferably, in the earlier part of this period). Net uplift driven by the coastal zone resulted in the formation of MIS9c (330 ka) and younger terraces. The formation of the unconformity and the initiation of net uplift coincide temporally with a ∼300–400 ka unconformity recognized by recent studies in a wide area offshore Aigion i.e. they could be part of an evolutionary event that affected the entire western part of the Corinth Rift or, a large area therein. Uplift rate estimates at four locations are discussed with reference to the morphotectonic context of differential uplift of secondary fault blocks, and the context of possible increase in uplift rate with time. The most reliable and most useful estimate for uplift rate at the longitude of the studied transect is 1.74–1.85 mm/year (time‐averaged estimate for the last ∼240 ka, based on calcareous nannoplankton and sequence‐stratigraphic interpretation). Copyright © 2009 John Wiley & Sons, Ltd.     

Deciphering the depositional environment of the laminated Crato fossil beds (Early Cretaceous,Araripe Basin,North‐eastern Brazil)

The laminated limestones of the Early Cretaceous Crato Formation of the Araripe Basin (North‐eastern Brazil) are world‐famous for their exceptionally well‐preserved and taxonomically diverse fossil fauna and flora. Whereas the fossil biota has received considerable attention, only a few studies have focused on the sedimentary characteristics and palaeoenvironmental conditions which prevailed during formation of the Crato Fossil Lagerstätte. The Nova Olinda Member represents the lowermost and thickest unit (up to 10 m) of the Crato Formation and is characterized by a pronounced rhythmically bedded, pale to dark lamination. To obtain information on palaeoenvironmental conditions, sample slabs derived from three local stratigraphic sections within the Araripe Basin were studied using high‐resolution multiproxy techniques including detailed logging, petrography, μ‐XRF scanning and stable isotope geochemistry. Integration of lithological and petrographic evidence indicates that the bulk of the Nova Olinda limestone formed via authigenic precipitation of calcite from within the upper water column, most probably induced and/or mediated by phytoplankton and picoplankton activity. A significant contribution from a benthonic, carbonate‐secreting microbial mat community is not supported by these results. Deposition took place under anoxic and, at least during certain episodes, hypersaline bottom water conditions, as evidenced by the virtually undisturbed lamination pattern, the absence of a benthonic fauna and by the occurrence of halite pseudomorphs. Input of allochthonous, catchment‐derived siliciclastics to the basin during times of laminite formation was strongly reduced. The δ¹⁸O values of authigenic carbonate precipitates (between ?7·1 and ?5·1‰) point to a ¹⁸O‐poor meteoric water source and support a continental freshwater setting for the Nova Olinda Member. The δ¹³C values, which are comparatively rich in ¹³C (between ?0·1 and +1·9‰), are interpreted to reflect reduced throughflow of water in a restricted basin, promoting equilibration with atmospheric CO₂, probably in concert with stagnant conditions and low input of soil‐derived carbon. Integration of lithological and isotopic evidence indicates a shift from closed to semi‐closed conditions towards a more open lake system during the onset of laminite deposition in the Crato Formation.     

Late Ordovician climbing‐dune cross‐stratification: a signature of outburst floods in proglacial outwash environments?

Climbing dune‐scale cross‐statification is described from Late Ordovician paraglacial successions of the Murzuq Basin (SW Libya). This depositional facies is comprised of medium‐grained to coarse‐grained sandstones that typically involve 0·3 to 1 m high, 3 to 5 m in wavelength, asymmetrical laminations. Most often stoss‐depositional structures have been generated, with preservation of the topographies of formative bedforms. Climbing‐dune cross‐stratification related to the migration of lower‐flow regime dune trains is thus identified. Related architecture and facies sequences are described from two case studies: (i) erosion‐based sandstone sheets; and (ii) a deeply incised channel. The former characterized the distal outwash plain and the fluvial/subaqueous transition of related deltaic wedges, while the latter formed in an ice‐proximal segment of the outwash plain. In erosion‐based sand sheets, climbing‐dune cross‐stratification results from unconfined mouth‐bar deposition related to expanding, sediment‐laden flows entering a water body. Within incised channels, climbing‐dune cross‐stratification formed over eddy‐related side bars reflecting deposition under recirculating flow conditions generated at channel bends. Associated facies sequences record glacier outburst floods that occurred during early stages of deglaciation and were temporally and spatially linked with subglacial drainage events involving tunnel valleys. The primary control on the formation of climbing‐dune cross‐stratification is a combination between high‐magnitude flows and sediment supply limitations, which lead to the generation of sediment‐charged stream flows characterized by a significant, relatively coarse‐grained, sand‐sized suspension‐load concentration, with a virtual absence of very coarse to gravelly bedload. The high rate of coarse‐grained sand fallout in sediment‐laden flows following flow expansion throughout mouth bars or in eddy‐related side bars resulted in high rates of transfer of sands from suspension to the bed, net deposition on bedform stoss‐sides and generation of widespread climbing‐dune cross‐stratification. The later structure has no equivalent in the glacial record, either in the ancient or in the Quaternary literature, but analogues are recognized in some flood‐dominated depositional systems of foreland basins.     

The Scandinavian Ice Sheet: from MIS 4 to the end of the Last Glacial Maximum

Lambeck, K., Purcell, A., Zhao, J. & Svensson, N‐O. 2010 (April): The Scandinavian Ice Sheet: from MIS 4 to the end of the Last Glacial Maximum. Boreas, Vol. 39, pp. 410–435. 10.1111/j.1502‐3885.2010.00140.x. ISSN 0300‐9483. Glacial rebound modelling, to establish constraints on past ice sheets from the observational evidence of palaeo‐shoreline elevations, is well established for the post‐ Last Glacial Maximum (post‐LGM) period, for which the observational evidence is relatively abundant and well distributed spatially and in time. This is particularly the case for Scandinavia. For the earlier part of the glacial cycle this evidence becomes increasingly sparse and uncertain such that, with the exception of the Eemian period, there are very few, if any, direct sea‐level indicators that constrain any part of the Scandinavian Ice Sheet evolution before the LGM. Instead, we assume that ice‐sheet basal conditions during Marine Isotope Stage 3 (MIS 3) are the same as those for the LGM, focus on establishing these conditions from the rebound analysis for the LGM and Lateglacial period, and then extrapolate to the earlier period using observationally constrained locations of the ice margins. The glacial rebound modelling and inversion follow previously established formulations, with the exception that the effects of water loading from proglacial lakes that form within the Baltic Basin and elsewhere have been included. The data set for the inversion of the sea‐ and lake‐level data has been extended to include marine‐limit data in order to extend the observational record further back in time. The result is a sequence of time slices for the Scandinavian Ice Sheet from the time of MIS 4 to the Lateglacial that are characterized by frozen basal conditions until late in the LGM interval when rapid thinning occurred in the eastern and southern sectors of the ice sheet. The primary function of these models is as an interpolator between the fragmentary observational constraints and to produce quantitative models for the glaciation history with predictive capabilities, for example regarding the evolution of the Baltic Basin.     

Rhizosphere and flooding regime as key factors for the mobilisation of arsenic and potentially harmful metals in basic,mining-polluted salt marsh soils

The occurrence of mining areas in the vicinities of salt marshes may affect their ecological functions and facilitate the transfer of pollutants into the food chain. The mobilisation of metals in salt marsh soils is controlled by abiotic (pH, redox potential) and biotic (influence of rhizosphere) factors. The effect of the rhizosphere of two plant species (Sarcocornia fruticosa and Phragmites australis) and different flooding regimes on potentially harmful metals and As mobilisation from salt marsh soil polluted by mining activities were investigated (total concentrations: 536 mg kg⁻¹ As, 37 mg kg⁻¹ Cd, 6746 mg kg⁻¹ Pb, 15,320 mg kg⁻¹ Zn). The results show that the changes in redox conditions (from 300 mV to −100 mV) and pH after flooding and rewetting periods may mobilise the contaminant elements into soil solution (e.g., 100 μg L⁻¹ Cd, 30 μg L⁻¹ Pb, 7 mg L⁻¹ Zn), where they are available for plants or may be leached from the soil. Drying periods generated peaks of concentrations in the soil solution (up to 120 μg L⁻¹ Cd and 50 μg L⁻¹ Pb). The risk assessment of As and metal-polluted salt marshes should take into account flood dynamics in order to prevent metal(loid) mobilisation.     

Petrographical,structural, and mechanical analysis of armorican phtanites: A key raw material for the Mesolithic in Western France

Over the last ninety years or so, archaeological field work on outcrops of raw materials in western France has allowed researchers to identify the use of a large number of deformed rock types in lithic industries. These materials include Armorican phtanites, which are cherts that were widely exploited during the Mesolithic, principally during its final phase (5500–5000 yrs cal. B.C.). Because of variations in the mineralogical composition and physical properties of phtanites, different mechanical properties are exhibited by samples from the four main geological formations containing this rock type in the Armorican Massif of western France. These geological and mechanical parameters influenced the quantity of rock used and the knapping methods employed. They also influenced the tool types produced and their transfer, as recorded in archaeological sequences. The types of raw materials used are also controlled by the distance to sources of coastal flint pebbles or other autochthonous siliceous rocks. Therefore, the role of raw material properties in the creation and persistence of techno‐cultural or economic characteristics is different for each type of phtanite and yields fundamental information on the interaction of society with the geological environment. © 2010 Wiley Periodicals, Inc.     

ESR dating of tooth enamel in Mousterian layer 20, El Castillo,Spain

Nine faunal teeth from layer 20 of El Castillo cave in Cantabrian Spain were dated using electron spin resonance (ESR). Two teeth were rejected due to inconsistent subsample ages, while the remaining teeth yielded a mean age that is consistent with the stratigraphic expectations: 42.7±3.5. Uncertainty in the external γ dose rate results in a potential systematic uncertainty of±6.4ka that should affect all samples equally. The results provide independent confirmation of previously reported ¹⁴C ages for layer 20. © 2010 Wiley Periodicals, Inc.