Synergetic efficiency of Lidar and WorldView-2 for 3D urban cartography in Northeast Mexico

Three-dimensional urban cartography is needed for city changes’ assessment. The variety of studies using 3D calculations of urban elements grows each year. Building and vegetation volumes are necessary to assess and understand spatio-temporal urban changeable environments. However, there are technical questions as to which method can improve 3D urban cartographic accuracy. The innovative part of this current study is the creation of a six-band hybrid obtained from LIDAR and WorldView2 synergy. Two different enhancement algorithms demonstrated the most important spectral features for the urban development and vegetation classes. Results indicated an improvement in accuracy by up to 21.3%, according to the Kappa coefficient. Both infra-red band and intensity band were the most significant, according to the principal components analysis. The synergy delimited classes and polygons, as well as the direct display of information regarding heights of elements and improving the extraction of roads, buildings and vegetation classes.     

Dynamics of arrays of floating point-absorber wave energy converters with inter-body and bottom slack-mooring connections

If point absorbers are employed in the extensive exploitation of the offshore wave energy resource, they should be deployed in arrays, the distance between the elements in the array being possibly tens of meters. In such cases, it may be more convenient that the array is spread moored to the sea bottom through only some of its elements, located in the periphery, while the other array elements are prevented from drifting and colliding with each other by connections to adjacent elements. An array of identical floating point absorbers located at the grid points of an equilateral triangular grid is considered in the paper. A spread set of slack-mooring lines connect the peripheric floaters to the bottom. A weight is located at the centre of each triangle whose function is to pull the three floaters towards each other and keep the inter-body mooring lines under tension. The power take-off system (PTO) is a linear damper activated by the buoy heaving motion. The whole system–buoys, moorings and power take-off systems–is assumed linear, so that a frequency domain analysis may be employed. Hydrodynamic interference between the oscillating buoys in array is accounted for. Equations are presented for a set of three identical point absorbers. This is then extended to more complex equilateral triangular grid arrays. Results from numerical simulations, with regular and irregular waves, are presented for the motions and power absorption of hemispherical converters in arrays of three and seven elements and for different mooring parameters and wave incidence angles. Comparisons are given with the unmoored and independently-moored buoy situations.     

CPLat: first operational experimental processing center for SIRGAS in Argentina

The SIRGAS permanent GPS network which is in fact the IGS network densification for the American continent, consists today of more than 200 stations covering the continent and islands. It is currently processed by the IGS RNAAC SIR centre at Deutsches Geodätisches Forschungsinstitut producing weekly free solutions relying on IGS final orbits and EOP that contribute to the ITRF through IGS. By August 2006, the SIRGAS Working Group I had accepted five proposals for experimental processing centers within the region that would collaborate with IGS RNAAC SIR. One of them, Centro de Procesamiento La Plata (CPLat) in Argentina, began processing 60 stations on October 2006. By January 2007 CPLat reached operational capability, delivering weekly free solution SINEX files, with an internal consistency of 1.5 mm average for the horizontal components, and 3 mm in the vertical. Comparisons with IGS global and IGS RNAAC SIR weekly solutions were taken as external consistency indications, showing average RMS residuals of 1.8, 2.4 and 5 mm for the north, east, and vertical component, respectively. Analysis and comparison of adjusted solution time series from CPLat and other processing centers has proved to be highly valuable for solution QC, namely detection and identification of station anomalous behavior or modelling problems. These procedures will ensure the maintenance of the performance specifications for CPLat solutions. Action is being taken in order to guarantee the continuity of this effort beyond the experimental phase.     

Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).     

Protein carbonyls and antioxidant defenses in corkwing wrasse (Symphodus melops) from a heavy metal polluted and a PAH polluted site

The use of fish in environmental monitoring has become increasingly important in recent years as anthropogenic substances, many of which function as prooxidants, are accumulating in aquatic environments. We have measured a battery of antioxidant defenses as a measure of oxidative status, as well as protein carbonylation as a measure of oxidative damage, in corkwing wrasse (Symphodus melops) captured near a disused copper mine, where water and sediment are contaminated with heavy metals, and an aluminum smelter, a site contaminated with PAHs. Results were compared to two different reference sites. Fish at the heavy metal site had lower glucose-6-phosphate dehydrogenase activity and elevated protein carbonyls (1.8 times) compared to fish from the reference site. At the PAH site, EROD was increased 2-fold, while total glutathione and methemoglobin reductase concentration, were decreased. No differences were seen in protein carbonyl levels at the PAH site. Measures of both antioxidant defenses and oxidative damage should be used when assessing effects of xenobiotics on oxidative stress in fish species.     

Diagnosis of trace metal contamination in sediments: the example of Ensenada and El Sauzal, two harbors in Baja California, Mexico

Total metal concentrations in sediments from within Ensenada and El Sauzal Harbors are generally higher than at the mouths. Grain-size analyses suggested that this enrichment could be due to the presence of fine-grained sediments in the inner part of the harbors rather than to anthropogenic perturbations. The (Me/Al)(sample) ratios for Pb, Co, Ni and Fe were significantly higher for Ensenada Harbor relative to El Sauzal Harbor, whereas the ratios for Cd, Mn, Zn and Cu were statistically equivalent for both harbors. Calculated enrichment factors [EF(Me)=(Me/Al)(sample)/(Me/Al)(shale)] indicated that the metals showing slight enrichment were those associated with anthropogenic contamination (Pb, Zn), or probably related to primary productivity in the water column (Cd, Co). The levels of most of the metals were not greatly enriched, a consideration that is of the utmost importance when contamination issues are at stake.     

The role of basement inheritance faults in the recent fracture system of the inner shelf around Alboran Island,Western Mediterranean

Fractures associated with volcanic rock outcrops on the inner shelf of Alboran Island, Western Mediterranean, were mapped on the basis of a side-scan sonar mosaic. Absolute maximum fracture orientation frequency is NW–SE to NNW–SSE, with several sub-maxima oriented NNE–SSW, NE–SW and ENE–WSW. The origin of the main fracture systems in Neogene and Quaternary rocks of the Alboran Basin (south Spain) appears to be controlled by older structures, namely NE–SW and WNW–ESE to NW–SE faults which cross-cut the basement. These faults, pre-Tortonian in origin, have been reactivated since the early Neogene in the form of strike-slip and extensional movements linked to the recent stress field in this area. Fracture analysis of volcanic outcrops on the inner continental shelf of Alboran Island suggests that the shelf has been deformed into a narrow shear zone limited by two NE–SW-trending, sub-parallel high-angle faults, the main orientation and density of which have been influenced by previous WNW–ESE to NW–SE basement fractures.     

Separate and interactive effects of eutrophication and climate variables on the ecosystem elements of the Gulf of Riga

There is currently a critical knowledge gap in how eutrophication and climate variables separately and interactively impact the dynamics of marine ecosystems. Based on long-term monitoring data we quantified the separate and combined impacts of nutrient loading, temperature, salinity, and wind conditions on zooplankton, zoobenthos and fish inhabiting a brackish water ecosystem in the Gulf of Riga. Changes in zoobenthos communities and herring stock were largely explained by climate variables. Zooplankton species were related to both eutrophication and climate variables, and models combining all environmental variables explained additional variation in zooplankton data compared to the separate models of climate and eutrophication. This suggests that zoobenthos communities and herring stock are largely driven by weather conditions, whereas the combined effect of weather and nutrient loads are likely the cause for dynamic zooplankton communities in the Gulf of Riga.     

Can a dam type of an alpine lake be derived from lake geometry?A negative result

Glacial lake outburst floods(GLOFs)represent one of the most serious hazard and risk in deglaciating high mountain regions worldwide and the need for GLOF hazard and risk assessment is apparent.As a consequence,numerous region-and nation-wide GLOF assessment studies have been published recently.These studies cover large areas and consider hundreds to thousands of lakes,prioritizing the hazard posed by them.Clearly,certain simplification is required for executing such studies,often resulting in neglecting qualitative characteristics which would need manual assignment.Different lake dam types(e.g.,bedrock-dammed,moraine-dammed)are often not distinguished,despite they control GLOF mechanism(dam overtopping/dam breach)and thus GLOF magnitude.In this study,we explore the potential of easily measurable quantitative characteristics and four ratios to approximate the lake dam type.Our dataset of 851 lakes of the Cordillera Blanca suggests that while variances and means of these characteristics of individual lake types differ significantly(F-test,t-test),value distribution of different geometrical properties can’t be used for the originally proposed purpose along the spectra.The only promising results are obtained for extreme values(selected bins)of the ratios.For instance,the low width to length ratio indicates likely morainedammed lake while the high value of ratio indicating round-shape of the lake indicates increased likelihood of bedrock-dammed lake.Overall,we report a negative result of our experiment since there are negligible differences of relative frequencies in most of the bins along the spectra.     

Reduction and relative equilibria for the two-body problem on spaces of constant curvature

We consider the two-body problem on surfaces of constant nonzero curvature and classify the relative equilibria and their stability. On the hyperbolic plane, for each \(q>0\) we show there are two relative equilibria where the masses are separated by a distance q. One of these is geometrically of elliptic type and the other of hyperbolic type. The hyperbolic ones are always unstable, while the elliptic ones are stable when sufficiently close, but unstable when far apart. On the sphere of positive curvature, if the masses are different, there is a unique relative equilibrium (RE) for every angular separation except \(\pi /2\). When the angle is acute, the RE is elliptic, and when it is obtuse the RE can be either elliptic or linearly unstable. We show using a KAM argument that the acute ones are almost always nonlinearly stable. If the masses are equal, there are two families of relative equilibria: one where the masses are at equal angles with the axis of rotation (‘isosceles RE’) and the other when the two masses subtend a right angle at the centre of the sphere. The isosceles RE are elliptic if the angle subtended by the particles is acute and is unstable if it is obtuse. At \(\pi /2\), the two families meet and a pitchfork bifurcation takes place. Right-angled RE are elliptic away from the bifurcation point. In each of the two geometric settings, we use a global reduction to eliminate the group of symmetries and analyse the resulting reduced equations which live on a five-dimensional phase space and possess one Casimir function.