Interactions and connectivity between runoff generation processes of different spatial scales

Monitoring runoff generation processes in the field is a prerequisite for developing conceptual hydrological models and theories. At the same time, our perception of hydrological processes strongly depends on the spatial and temporal scale of observation. Therefore, the aim of this study is to investigate interactions between runoff generation processes of different spatial scales (plot scale, hillslope scale, and headwater scale). Different runoff generation processes of three hillslopes with similar topography, geology and soil properties, but differences in vegetation cover (grassland, coniferous forest, and mixed forest) within a small v‐shaped headwater were measured: water table dynamics in wells with high spatial and temporal resolution, subsurface flow (SSF) of three 10 m wide trenches at the bottom of the hillslopes subdivided into two trench sections each, overland flow at the plot scale, and catchment runoff. Bachmair et al. ( 2012 ) found a high spatial variability of water table dynamics at the plot scale. In this study, we investigate the representativity of SSF observations at the plot scale versus the hillslope scale and vice versa, and the linkage between hillslope dynamics (SSF and overland flow) and streamflow. Distinct differences in total SSF within each 10 m wide trench confirm the high spatial variability of the water table dynamics. The representativity of plot scale observations for hillslope scale SSF strongly depends on whether or not wells capture spatially variable flowpaths. At the grassland hillslope, subsurface flowpaths are not captured by our relatively densely spaced wells (3 m), despite a similar trench flow response to the coniferous forest hillslope. Regarding the linkage between hillslope dynamics and catchment runoff, we found an intermediate to high correlation between streamflow and hillslope hydrological dynamics (trench flow and overland flow), which highlights the importance of hillslope processes in this small watershed. Although the total contribution of SSF to total event catchment runoff is rather small, the contribution during peak flow is moderate to substantial. Additionally, there is process synchronicity between spatially discontiguous measurement points across scales, potentially indicating subsurface flowpath connectivity. Our findings stress the need for (i) a combination of observations at different spatial scales, and (ii) a consideration of the high spatial variability of SSF at the plot and hillslope scale when designing monitoring networks and assessing hydrological connectivity. Copyright © 2013 John Wiley & Sons, Ltd.     

Palaeolimnology of Lake Sapanca and identification of historic earthquake signals,Northern Anatolian Fault Zone (Turkey)

Lake Sapanca is located on a strand of the Northern Anatolian Fault Zone (NAFZ, Turkey), where a series of strong earthquakes (Ms >6.0) have occurred over the past hundred years. Identifying prehistoric earthquakes in and around Lake Sapanca is key to a better understanding of plate movements along the NAFZ. This study contributes to the development of palaeolimnological tools to identify past earthquakes in Lake Sapanca. To this end several promising proxies were investigated, specifically lithology, magnetic susceptibility, grain size (thin-section and laser analysis), geochemistry, pollen concentration, diatom assemblages, ¹³⁷Cs and ²¹⁰Pb. Sedimentological indicators provided evidence for reworked, turbidite-like or homogeneous facies (event layers) in several short cores (<45 cm). Other indicators of sediment input and the historical chronicles available for the area suggest that three of these event layers likely originated from the AD 1957, 1967 and 1999 earthquakes. Recent changes in sediment deposition and nutrient levels have also been identified, but are probably not related to earthquakes. This study demonstrates that a combination of indicators can be used to recognize earthquake-related event layers in cores that encompass a longer period of time.     

Dating of snow avalanches by means of wound‐induced vessel anomalies in sub‐arctic Betula pubescens

Dendrogeomorphic research has long relied on scarred trees to reconstruct the frequency of mass‐movement processes. Injuries have mostly been dated macroscopically by counting the tree rings formed after wounding. Tree‐ring anatomical anomalies induced by cambial injury, in contrast, have only recently been recognized as proxy records of past events. We investigated 12 sub‐arctic downy birch (Betula pubescens Ehrh.) trees scarred by snow avalanches in Norway and Iceland. Earlywood vessel lumina were measured for each tree in the xylem tissue bordering the scars. Seven successive rings were examined, namely two control rings laid down prior to wounding and five rings in the wound xylem. We provide evidence that snow‐avalanche‐induced wounding resulted in atypically narrow earlywood vessels over at least two years. Our data demonstrate that wound‐associated vessel anomalies represent tangible markers of mass‐movement processes, and as such make a viable tool for reconstructing past events. Similar dendrogeomorphic studies based on tree‐ring anatomy can be readily conducted with other mass‐movement processes, as well as with other broad‐leaved tree species. Ultimately, this new approach will foster increment coring over more invasive sampling techniques.     

The loess sequence of Dolní Věstonice,Czech Republic: A new OSL‐based chronology of the Last Climatic Cycle

The Dolní Věstonice loess section in the Czech Republic is well known for its high‐resolution loess–palaeosol sequence of the last interglacial–glacial climatic cycle (Upper Pleistocene). The loess section is situated in a climatic transition zone between oceanic and continental climates and is therefore of great value in reconstructing past regional climate conditions and their interaction with climate systems, in particular that of the North Atlantic. Based on a combination of optically stimulated luminescence (OSL) ages, stratigraphic field observations and magnetic susceptibility measurements, a chrono‐climatic interpretation of the Dolní Věstonice loess section is presented. To establish a reliable Upper Pleistocene chronology, a quartz OSL approach was applied for equivalent dose (D_e) determination. Monomineralic quartz extracts of three distinct grain sizes, fine (4–11 μm), middle (38–63 μm) and coarse (90–200 μm), were used and compared. Within error limits, the calculated OSL ages are the same for the different grain sizes, and the OSL ages are in stratigraphic order. The established OSL chronology is in agreement with a Weichselian litho‐ and pedostratigraphy. The Dolní Věstonice loess section is characterized by four pedosedimentary subsequences. At the base of the profile, subsequence I is characterized by a distinct Early Glacial soil complex, OSL‐dated to c. 110 to 70 ka, representing one of the most complete records of environmental change in the European loess belt. Subsequence II is allocated to the Lower Pleniglacial and is characterized by laminated sandy loess. Middle Pleniglacial subsequence III is represented by a brown soil complex, and is followed by the uppermost subsequence IV, characterized by a thick body of laminated sandy loess, indicating strong wind activity and a high sedimentation rate of more than ～1 mm a^?1 during the Upper Pleniglacial. According to the OSL chronology, as well as to the sedimentological and palaeopedological investigations, it is likely that the sequence at Dolní Věstonice has recorded most of the climatic events expressed in the NGRIP δ¹⁸O reference record between 110 and 70 ka.     

Energy-Dependent Timing of Thermal Emission in Solar Flares

We report solar flare plasma to be multi-thermal in nature based on the theoretical model and study of the energy-dependent timing of thermal emission in ten M-class flares. We employ high-resolution X-ray spectra observed by the Si detector of the “Solar X-ray Spectrometer” (SOXS). The SOXS onboard the Indian GSAT-2 spacecraft was launched by the GSLV-D2 rocket on 8 May 2003. Firstly we model the spectral evolution of the X-ray line and continuum emission flux F(ε) from the flare by integrating a series of isothermal plasma flux. We find that the multi-temperature integrated flux F(ε) is a power-law function of ε with a spectral index (γ)≈−4.65. Next, based on spectral-temporal evolution of the flares we find that the emission in the energy range E=4 – 15 keV is dominated by temperatures of T=12 – 50 MK, while the multi-thermal power-law DEM index (δ) varies in the range of −4.4 and −5.7. The temporal evolution of the X-ray flux F(ε,t) assuming a multi-temperature plasma governed by thermal conduction cooling reveals that the temperature-dependent cooling time varies between 296 and 4640 s and the electron density (n _e) varies in the range of n _e=(1.77 – 29.3)×10¹⁰ cm⁻³. Employing temporal evolution technique in the current study as an alternative method for separating thermal from nonthermal components in the energy spectra, we measure the break-energy point, ranging between 14 and 21±1.0 keV.     

Analyzing bank filtration by deconvoluting time series of electric conductivity

Knowing the travel-time distributions from infiltrating rivers to pumping wells is important in the management of alluvial aquifers. Commonly, travel-time distributions are determined by releasing a tracer pulse into the river and measuring the breakthrough curve in the wells. As an alternative, one may measure signals of a time-varying natural tracer in the river and in adjacent wells and infer the travel-time distributions by deconvolution. Traditionally this is done by fitting a parametric function such as the solution of the one-dimensional advection-dispersion equation to the data. By choosing a certain parameterization, it is impossible to determine features of the travel-time distribution that do not follow the general shape of the parameterization, i.e., multiple peaks. We present a method to determine travel-time distributions by nonparametric deconvolution of electric-conductivity time series. Smoothness of the inferred transfer function is achieved by a geostatistical approach, in which the transfer function is assumed as a second-order intrinsic random time variable. Nonnegativity is enforced by the method of Lagrange multipliers. We present an approach to directly compute the best nonnegative estimate and to generate sets of plausible solutions. We show how the smoothness of the transfer function can be estimated from the data. The approach is applied to electric-conductivity measurements taken at River Thur, Switzerland, and five wells in the adjacent aquifer, but the method can also be applied to other time-varying natural tracers such as temperature. At our field site, electric-conductivity fluctuations appear to be an excellent natural tracer.     

Upper limits on neutrino fluxes from point-like sources with AMANDA-II

The AMANDA-II telescope, operated by the IceCube collaboration, is currently the world’s most sensitive telescope to fluxes of neutrinos from individual sources. A data sample of 4282 neutrino induced events collected in 1001 days of detector livetime during the years 2000–2004 have now been analyzed looking for a neutrino signal from point-like sources. A sensitivity to fluxes of of d Φ/dE=1.0×10⁻¹⁰(E/TeV)⁻² TeV⁻¹ cm⁻²s⁻¹ was reached in the energy range between 1.7 TeV and 2.4 PeV. So far no statistically significant localized excess of events over the background of atmospheric neutrinos has been found, which would be ascribed to a neutrino source. However, the flux upper limits derived from the non-observation of a signal are comparable to observed fluxes of high energy gamma rays from blazars and within the range of current models for neutrino emission from selected sources. Possible constraints on these models are discussed.      

CMOS Detector Technology

An entry level overview of state-of-the-art CMOS detector technology is presented. Operating principles and system architecture are explained in comparison to the well-established CCD technology, followed by a discussion of important benefits of modern CMOS-based detector arrays. A number of unique CMOS features including different shutter modes and scanning concepts are described. In addition, sub-field stitching is presented as a technique for producing very large imagers. After a brief introduction to the concept of monolithic CMOS sensors, hybrid detectors technology is introduced. A comparison of noise reduction methods for CMOS hybrids is presented. The final sections review CMOS fabrication processes for monolithic and vertically integrated image sensors.