Detection of Temperature-Dependent Spectral Variation on the Asteroid Eros and New Evidence for the Presence of an Olivine-Rich Silicate Assemblage

Data obtained by the near-infrared spectrometer carried by the NEAR-Shoemaker spacecraft show that the spectral properties of the asteroid Eros vary with temperature. The manner in which they vary demonstrates that the mineral olivine is a major constituent of the surface. The near-IR temperature-dependent spectral properties of Eros in the northern hemisphere, and for two individual regions on the surface, show clear evidence of the presence of the mineral olivine and are a close match to the temperature-spectral behavior of LL-type ordinary chondrite meteorites. While the presence of other olivine-rich meteorites cannot be excluded, H-type ordinary chondrites are clearly too pyroxene-rich to be permitted as a major surface component of Eros. The results of the thermal-spectral analysis are consistent with results from analysis of conventional reflectance spectra of the asteroid and contribute unambiguous detection of olivine to the understanding of the surface composition of Eros.     

The 1991 outburst of Comet P/Metcalf-Brewington: a study of the light curve

The light curve of the outburst of Comet P/Metcalf-Brewington (1991 I) is investigated. The parameters of the light curve are quite uncertain as it may be fitted both in terms of variation with heliocentric distance and exponential decay with time however, after maximum a empirical fit ofm ₁ = 4.1 + 5 log Delta + 14.8 logr gives a good fit to the data. The absolute magnitude brightened at least 11 magnitudes in outburst. The outburst is most plausibly caused by the release of micron sized grains as, were the outbust due to dust emission, it would imply the expulsion of a large fraction of the total mass of the nucleus.     

The Monitor project: JW 380 – a 0.26-, 0.15-M⊙, pre-main-sequence eclipsing binary in the Orion nebula cluster

We present a general recipe for constructing N -body realizations of galaxies comprising near spherical and disc components. First, an exact spherical distribution function for the spheroids (halo and bulge) is determined, such that it is in equilibrium with the gravitational monopole of the disc components. Second, an N -body realization of this model is adapted to the full disc potential by growing the latter adiabatically from its monopole. Finally, the disc is sampled with particles drawn from an appropriate distribution function, avoiding local-Maxwellian approximations. We performed test simulations and find that the halo and bulge radial density profile very closely match their target model, while they become slightly oblate due to the added disc gravity. Our findings suggest that vertical thickening of the initially thin disc is caused predominantly by spiral and bar instabilities, which also result in a radial re-distribution of matter, rather than scattering off interloping massive halo particles.     

Mapping on the HEALPix grid

The natural spherical projection associated with the Hierarchical Equal-Area and Isolatitude Pixelization (HEALPix) is described and shown to be one of a hybrid class that combines the cylindrical equal-area and Collignon projections, not previously documented in the cartographic literature. Projection equations are derived for the class in general and are used to investigate its properties. It is shown that the HEALPix projection suggests a simple method of (i) storing and (ii) visualizing data sampled on the grid of the HEALPix pixelization, and also suggests an extension of the pixelization that is better suited for these purposes. Potentially useful properties of other members of the class are described, and new triangular and hexagonal pixelizations are constructed from them. Finally, the standard formalism is defined for representing the celestial coordinate system for any member of the class in the FITS data format.     

SWAS observations of water vapor in the Venus mesosphere

We present the first detections of the ground-state H₂¹⁶O (₁₁₀-₁₀₁) rotational transition (at 556.9 GHz) and the ¹³CO (5-4) rotational transition from the atmosphere of Venus, measured with the Submillimeter Wave Astronomy Satellite (SWAS). The observed spectral features of these submillimeter transitions originate primarily from the 70-100 km altitude range, within the Venus mesosphere. Observations were obtained in December 2002, and January, March, and July 2004, coarsely sampling one Venus diurnal period as seen from Earth. The measured water vapor absorption line depth shows large variability among the four observing periods, with strong detections of the line in December 2002 and July 2004, and no detections in January and March 2004. Retrieval of atmospheric parameters was performed using a multi-transition inversion algorithm, combining simultaneous retrievals of temperature, carbon monoxide, and water profiles under imposed constraints. Analysis of the SWAS spectra resulted in measurements or upper limits for the globally averaged mesospheric water vapor abundance for each of the four observation periods, finding variability over at least two orders of magnitude. The results are consistent with both temporal and diurnal variability, but with short-term fluctuations clearly dominating. These results are fully consistent with the long-term study of mesospheric water vapor from millimeter and submillimeter observations of HDO [Sandor, B.J., Clancy, R.T., 2005. Icarus 177, 129-143]. The December 2002 observations detected very rapid change in the mesospheric water abundance. Over five days, a deep water absorption feature consistent with a water vapor abundance of 4.5±1.5 parts per million suddenly gave way to a significantly shallower absorption, implying a decrease in the water vapor abundance by a factor of nearly 50 in less that 48 h. In 2004, similar changes in the water vapor abundance were measured between the March and July SWAS observing periods, but variability on time scales of less than a week was not detected. The mesospheric water vapor is expected to be in equilibrium with aerosol particles, primarily composed of concentrated sulfuric acid, in the upper haze layers of the Venus atmosphere. If true, moderate amplitude (10-15 K) variability in mesospheric temperature, previously noted in millimeter spectroscopy observations of Venus, can explain the rapid water vapor variability detected by SWAS.     

Wind-driven upwelling and surface chlorophyll blooms in Greater Cook Strait

We present the results of a combined observational and numerical study to investigate cool plumes of nutrient-rich upwelled water that emanate near the Kahurangi Shoals and extend into Greater Cook Strait. Surface temperature and chlorophyll are mapped using satellite observations to produce surface climatologies, to validate a numerical simulation and to show the utility of using spatial temperature differences as a measure of upwelling. We find upwelling near the Kahurangi Shoals is strongly wind-driven in the weather band. Upwelling occurs at all times of the year, but its surface signature is only visible in summer months. The upwelled nutrient-rich water supports increased primary production compared to surrounding waters, particularly in summer when the water column is more stratified and surrounding surface waters are presumably nutrient depleted.     

Advances in the fatigue assessment of wire ropes

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.     

Revisiting and rethinking regional urbanization in Changjiang River Delta, China

China is entering a critical and accelerating phase of urbanization.As one of the most urbanized regions in China,the Changjiang(Yangtze)River Delta has experienced dramatic urbanization and urban transformation.However,in the recent years,many changes have taken place in this region and there is limited attention to the regional urbanization path evolution,its problems and the way to solve these problems.Therefore,we should revisit the urbanization process in the Changjiang River Delta again.In this paper,we revisited urbanization paths of the Changjiang River Delta by data analysis,influence factors of urbanization by the Gray Relational Analysis,and major challenges to urbanization of the Changjiang River Delta by theoretical considerations.We found that the urbanization of the Changjiang River Delta had experienced several stages of large-scale spatial and urban system restructuring.Within the Changjiang River Delta,Shanghai,Zhejiang and Jiangshu had experienced different urbanization path with local characteristics.But with their development model gradually converging,their urbanization model is also converging.We also found that the major influence factors affecting the Changjiang River Delta urbanization were dynamic change and urbanization was driven by different key factors in different socio-economic development stages.Meanwhile,the Changjiang River Delta urbanization is facing many problems such as existing institutional arrangements,including the hukou(household registration)system and others which can not meet the needs of current socioeconomic development and urbanization.Therefore,it is imperative to promote institutional innovation and adopt a new urbanization development strategy for the sake of the orderly and sustainable urbanization development in the Changjiang River Delta.     

Discretization approach in integrated Hydrologic Model for surface and groundwater interaction

The commonly used discretization approaches for distributed hydrological models can be broadly categorized into four types,based on the nature of the discrete components:Regular Mesh,Triangular Irregular Networks(TINs),Representative Elementary Watershed(REWs) and Hydrologic Response Units(HRUs).In this paper,a new discretization approach for landforms that have similar hydrologic properties is developed and discussed here for the Integrated Hydrologic Model(IHM),a combining simulation of surface and groundwater processes,accounting for the interaction between the systems.The approach used in the IHM is to disaggregate basin parameters into discrete landforms that have similar hydrologic properties.These landforms may be impervious areas,related areas,areas with high or low clay or organic fractions,areas with significantly different depths-to-water-table,and areas with different types of land cover or different land uses.Incorporating discrete landforms within basins allows significant distributed parameter analysis,but requires an efficient computational structure.The IHM integration represents a new approach interpreting fluxes across the model interface and storages near the interface for transfer to the appropriate model component,accounting for the disparate discretization while rigidly maintaining mass conservation.The discretization approaches employed in IHM will provide some ideas and insights which are helpful to those researchers who have been working on the integrated models for surface-groundwater interaction.     

Secondary alteration of the impactite and mineralization in the basal Tertiary sequence,Yaxcopoil‐1, Chicxulub impact crater,Mexico

Abstract The 65 Ma Chicxulub impact crater formed in the shallow coastal marine shelf of the Yucatán Platform in Mexico. Impacts into water‐rich environments provide heat and geological structures that generate and focus sub‐seafloor convective hydrothermal systems. Core from the Yaxcopoil‐1 (Yax‐1) hole, drilled by the Chicxulub Scientific Drilling Project (CSDP), allowed testing for the presence of an impact‐induced hydrothermal system by: a) characterizing the secondary alteration of the 100 m‐thick impactite sequence; and b) testing for a chemical input into the lower Tertiary sediments that would reflect aquagene hydrothermal plume deposition. Interaction of the Yax‐1 impactites with seawater is evident through redeposition of the suevites (unit 1), secondary alteration mineral assemblages, and the subaqueous depositional environment for the lower Tertiary carbonates immediately overlying the impactites. The least‐altered silicate melt composition intersected in Yax‐1 is that of a calc‐alkaline basaltic andesite with 53.4–56 wt% SiO_{2(volatile‐free)}. The primary mineralogy consists of fine microlites of diopside, plagioclase (mainly Ab 47), ternary feldspar (Ab 37 to 77), and trace apatite, titanite, and zircon. The overprinting alteration mineral assemblage is characterized by Mg‐saponite, K‐montmorillonite, celadonite, K‐feldspar, albite, Fe‐oxides, and late Ca and Mg carbonates. Mg and K metasomatism resulted from seawater interaction with the suevitic rocks producing smectite‐K‐feldspar assemblages in the absence of any mixed layer clay minerals, illite, or chlorite. Rare pyrite, sphalerite, galena, and chalcopyrite occur near the base of the impactites. These secondary alteration minerals formed by low temperature (0–150°C) oxidation and fixation of alkalis due to the interaction of glass‐rich suevite with down‐welling seawater in the outer annular trough intersected at Yax‐1. The alteration represents a cold, Mg‐K‐rich seawater recharge zone, possibly recharging higher temperature hydrothermal activity proposed in the central impact basin. Hydrothermal metal input into the Tertiary ocean is shown by elevated Ni, Ag, Au, Bi, and Te concentrations in marcasite and Cd and Ga in sphalerite in the basal 25 m of the Tertiary carbonates in Yax‐1. The lower Tertiary trace element signature reflects hydrothermal metal remobilization from a mafic source rock and is indicative of hydrothermal venting of evolved seawater into the Tertiary ocean from an impact‐generated hydrothermal convective system.