Numerical Modelling of a Shaking Table Test for Soil-Foundation-Superstructure Interaction by Means of a Soil Constitutive Model Implemented in a FEM Code

Dynamic soil-structure interaction (DSSI) plays a fundamental role in many geotechnical and/or structural design situations, as clearly shown by the damage which occurred during several recent earthquakes (Kobe 1995; Koaceli 1999; Chi-Chi 1999; L’Aquila 2009). For a long time civil engineering researchers have devoted increasing attention to this subject. Thanks to their efforts, several technical regulations, such as EC8 (2003), have taken DSSI into account. However, many steps are still necessary in order to increase our knowledge regarding this complex phenomenon, as well as to make all the results achieved known to academics and practitioners. This paper presents the results of a shaking table test performed on a scaled physical model consisting of a 3-D steel frame resting on a bed of sand. The experimental results are compared with the numerical ones obtained using a sophisticated elasto-plastic constitutive model recently implemented in the FEM code utilised. The solution of geotechnical problems requires the use of appropriate constitutive models. Many interesting constitutive models have been developed, but only a few of these have been implemented into commercial numerical codes; which is particularly so when dynamic analyses are required. The described experimental results, as well as the comparison between them and the numerical results, allow interesting considerations to be drawn on dynamic soil-structure interaction and on its numerical simulation.     

Petrological imaging of an active pluton beneath Cerro Uturuncu,Bolivia

Uturuncu is a dormant volcano in the Altiplano of SW Bolivia. A present day ~70 km diameter interferometric synthetic aperture radar (InSAR) anomaly roughly centred on Uturuncu’s edifice is believed to be a result of magma intrusion into an active crustal pluton. Past activity at the volcano, spanning 0.89 to 0.27 Ma, is exclusively effusive and almost all lavas and domes are dacitic with phenocrysts of plagioclase, orthopyroxene, biotite, ilmenite and Ti-magnetite plus or minus quartz, and microlites of plagioclase and orthopyroxene set in rhyolitic groundmass glass. Plagioclase-hosted melt inclusions (MI) are rhyolitic with major element compositions that are similar to groundmass glasses. H₂O concentrations plotted versus incompatible elements for individual samples describe a trend typical of near-isobaric, volatile-saturated crystallisation. At 870 °C, the average magma temperature calculated from Fe–Ti oxides, the average H₂O of 3.2 ± 0.7 wt% and CO₂ typically <160 ppm equate to MI trapping pressures of 50–120 MPa, approximately 2–4.5 km below surface. Such shallow storage precludes the role of dacite magma emplacement into pre-eruptive storage regions as being the cause of the observed InSAR anomaly. Storage pressures, whole-rock (WR) chemistry and phase assemblage are remarkably consistent across the eruptive history of the volcano, although magmatic temperatures calculated from Fe–Ti oxide geothermometry, zircon saturation thermometry using MI and orthopyroxene-melt thermometry range from 760 to 925 °C at NNO ± 1 log. This large temperature range is similar to that of saturation temperatures of observed phases in experimental data on Uturuncu dacites. The variation in calculated temperatures is attributed to piecemeal construction of the active pluton by successive inputs of new magma into a growing volume of plutonic mush. Fluctuating temperatures within the mush can account for sieve-textured cores and complex zoning in plagioclase phenocrysts, resorption of quartz and biotite phenocrysts and apatite microlites. That Fe–Ti oxide temperatures vary by ~50–100 °C in a single thin section indicates that magmas were not homogenised effectively prior to eruption. Phenocryst contents do not correlate with calculated magmatic temperatures, consistent with crystal entrainment from the mush during magma ascent and eruption. Microlites grew during ascent from the magma storage region. Variability in the proportion of microlites is attributed to differing ascent and effusion rates with faster rates in general for lavas >0.5 Ma compared to those <0.5 Ma. High microlite contents of domes indicate that effusion rates were probably slowest in dome-forming eruptions. Linear trends in WR major and trace element chemistries, highly variable, bimodal mineral compositions, and the presence of mafic enclaves in lavas demonstrate that intrusion of more mafic magmas into the evolving, shallow plutonic mush also occurred further amplifying local temperature fluctuations. Crystallisation and resorption of accessory phases, particularly ilmenite and apatite, can be detected in MI and groundmass glass trace element covariation trends, which are oblique to WRs. Marked variability of Ba, Sr and La in MI can be attributed to temperature-controlled, localised crystallisation of plagioclase, orthopyroxene and biotite within the evolving mush.     

Editorial

In 2009 the Journal enters its 50^th year of publication –our "golden anniversary"! This is certainly good cause for celebrationand we will be doing just that in various ways throughout theyear. Volume 1 was published in February 1960. The very first paperby P.J. Wyllie and O.F. Tuttle on "The system CaO-CO₂-H₂O andthe origin of carbonatites" [J.Petrology 1:1-46] provided anidea for a special symposium at the 2009 Goldschmidt conference"Challenges to Our Volatile     

Youth empowerment and information and communication technologies: a case study of a remote Australian Aboriginal community

In spite of a ‘digital divide’, Aboriginal groups in Australia, as internationally, are increasingly using information and communication technologies (ICTs) to maintain their cultures, communicate, archive knowledge, empower their communities, develop skills and generate income. Each community uses the technologies differently in accordance with their particular needs and the opportunities available. The use of ICTs in Aboriginal youth empowerment is illustrated through a case study of an initiative undertaken by the Walkatjurra Cultural Centre in Leonora, remote Western Australia. A participatory process was used to engage the Centre’s young people and they were given individual assistance to develop their ICT related capacity. The community conceives this youth empowerment to be part of a broader youth participation process that will contribute to the Centre’s overall objectives.     

Post-collisional, K-rich mafic magmatism in south Tibet: constraints on Indian slab-to-wedge transport processes and plateau uplift

Post-collisional (23–8 Ma), potassium-rich (including ultrapotassic and potassic) mafic magmatic rocks occur within the north–south-trending Xuruco lake–Dangre Yongcuo lake (XDY) rift in the Lhasa terrane of the southern Tibetan Plateau, forming an approximately 130-km-long semi-continuous magmatic belt. They include both extrusive and intrusive facies. Major and trace element and Sr–Nd–Pb isotopic data are presented for all of the known exposures within the XDY rift. The potassium-rich, mafic igneous rocks are characterized by high MgO (5.9–10.8 wt.%), K₂O (4.81–10.68 wt.%), Ba (1,782–5,618 ppm) and Th (81.3–327.4 ppm) contents, and relatively high SiO₂ (52.76–58.32 wt.%) and Al₂O₃ (11.10–13.67 wt.%). Initial Sr isotopic compositions are extremely radiogenic (0.712600–0.736157), combined with low (²⁰⁶Pb/²⁰⁴Pb) _i (18.28–18.96) and (¹⁴³Nd/¹⁴⁴Nd) _i (0.511781–0.512046). Chondrite-normalized rare earth element patterns display relatively weak negative Eu anomalies. Primitive mantle-normalized incompatible trace element patterns exhibit strong enrichments in large ion lithophile elements relative to high-field-strength elements and display strongly negative Ta–Nb–Ti anomalies. The combined major and trace element and Sr–Nd–Pb isotopic characteristics of the K-rich igneous rocks suggest that the primitive magmas were produced by 1–10 % partial melting of an asthenospheric mantle source enriched by both fluids and partial melts derived from Indian passive continental margin sediments subducted into the shallow mantle as a consequence of the northward underthrusting of the Indian continental lithosphere beneath Tibet since the India–Asia collision at ~55 Ma. The best-fit model results indicate that a melt with trace element characteristics similar to those of the K-rich rocks could be generated by 8–10 % partial melting of a metasomatized mantle source in the south and 1–2 % melting in the north of the XDY rift. Trace element and Sr–Nd–Pb isotopic modeling indicate that the proportion of fluid derived from the subducted sediments, for which we use as a proxy the Higher Himalayan Crystalline Sequence (HHCS), in the mantle source region increases from north (rear-arc) to south (front-arc), ranging from 0 to 5 %, respectively. Correspondingly, the proportion of the melt derived from the subducted HHCS in the source increases from north (2 %) to south (15 %). The increasing proportion of the fluid and melt component in the mantle source from north to south, together with a southward decreasing trend in the age of the K-rich magmatism within the XDY rift, is inferred to reflect rollback of the subducted Indian lithospheric mantle slab during the period 25–8 Ma. Slab rollback may be linked to a decreasing convergence rate between India and Asia. As a consequence of slab rollback at 25 Ma beneath the Lhasa terrane, its geodynamic setting was transformed from a convergent (55–25 Ma) to an extensional (25–8 Ma) regime. The occurrence of K-rich magmatism during the period 25–8 Ma is a consequence of the decompression melting of an enriched mantle source, which may signal the onset of extension in the southern Tibetan Plateau and provide a petrological record of the extension process.     

Species composition,abundance and biomass of microphytoplankton in the KwaZulu-Natal Bight on the east coast of South Africa

Nearshore marine environments are influenced by an array of variables that can either be land-derived or of marine origin, and nearshore phytoplankton communities may differ in their taxonomic composition and biomass in response to such variables. The KwaZulu-Natal Bight (hereafter referred to as ‘the bight’) is an oligo-mesotrophic, nearshore oceanic environment, that is influenced by both terrestrial run-off and upwelling. A microphytoplankton survey of the bight conducted over several stations and depths and two seasons was conducted in order to ascertain species composition, abundance and biomass. Microphytoplankton abundance was generally low (a maximum of 180 000 cells l–1 was recorded) but differed considerably between sites and seasons. A total of 99 taxa of mainly Bacillariophyceae and some Dinophyceae, Prymnesiophyceae and Cyanophyceae were identified in the present study. In the central bight, higher abundance and biomass were measured in February (wet season), which may be a possible consequence of terrestrial nutrient inputs. In the northern and southern bight we measured higher abundance and biomass in August (dry season). Upwelling was not detected during the study, but an influence of terrestrial nutrient sources was detected at the coastal stations. Turbid conditions were specific to the site near the Thukela River mouth and possibly influenced abundance, biomass and species composition at this site. Historic data on microphytoplankton composition are scarce, but comparisons with surveys from the 1960s reveal that around 60% of the common diatoms recorded then also occurred in the present study. Small taxa [20–200 µm] dominated the microphytoplankton community. Community composition was fairly uniform throughout the bight in both seasons, dominated in general by Chaetoceros species, and on occasion co-dominated by Thalassionema nitzschioides and Dactyliosolen fragilissimus.     

Fibre reinforced sands: from experiments to modelling and beyond

Based on hypotheses derived directly from experimental observations of the triaxial behaviour, a constitutive model for fibre reinforced sands is built in this paper. Both the sand matrix and the fibres obey their own constitutive law, whereas their contributions are superimposed using a volumetric homogenization procedure. The Severn‐Trent sand model, which combines well‐known concepts such as critical state theory, Mohr‐Coulomb like strength criterion, bounding surface plasticity and kinematic hardening, is adopted for the sand matrix. Although the fibres are treated as discrete forces with defined orientation, an equivalent continuum stress for the fibre phase is derived to allow the superposition of effects of sand and fibres. The fibres are considered as purely tensile elements following a linear elastic constitutive rule. The strain in the fibres is expressed as a fraction of the strain in the reinforced sample so that imperfect bonding is assumed at the sand‐fibre interface. Only those fibres oriented within the tensile strain domain of the sample can mobilize tensile stress—the orientation of fibres is one of the key ingredients to capture the anisotropic behaviour of fibre reinforced soil that is observed for triaxial compression and extension loading. A further mechanism of partition of the volume of voids between the fibres and the sand matrix is introduced and shown to be fundamental for the simulation of the volumetric behaviour of fibre‐reinforced soils. Copyright © 2012 John Wiley & Sons, Ltd.