Eliminierung und Rückgewinnung von Metallionen aus Abwässern — eine Übersicht

The present state and the trends of the recovery of heavy metals from wastewaters are presented. The classical precipitation techniques are insatisfactory due to increases of solubility in the presence of impurity ions and/or complexing agents. At present, ion-exchange processes constitute the most frequently used method of metal recycling with an effective enrichment of metal ions. For the effective separation of metals from solutions of a low concentration the electrolytic reduction demands large electrode surface areas. In cells with fixed-bed or fluidized cathodes one can obtain specific electrode surface areas of some 10³ m²/m^m3. For the future, processes of extraction and especially membrane separation will gain in importance. In the past few years, a large number of highly selective metal extracting agents as well as the liquid membrane permeation with suitable carriers were developed. Combinations of membrane separation processes with chemical reactions may attain the same importance, as e.g. ultrafiltration in connection with the fixation of metal ions to watersoluble polymers. In the long run, especially techniques will prevail which will not only result in metal enrichment but also in the recovery of the raw material water.     

Influence of wave and sediment dynamics on cordgrass (<Emphasis Type="Italic">Spartina anglica</Emphasis>) growth and sediment accumulation on an exposed intertidal flat

Isolated patches ofSpartina anglica (cordgrass) at two sites on a wave-exposed mid-intertidal flat of the 340 km² Manukau Harbor (Auckland, New Zealand) have developed very differently since being planted in the mid-1970s. Although the two sites are only 0.5 km apart and at the same intertidal elevation,Spartina patches at the easternmost site (site 1) have as much as an order of magnitude higher biomass and accumulated sediment volume thanSpartina patches at site 2. A field experiment was conducted to characterize waves and associated sediment dynamics at each site, which might explain whySpartina patches at the two sites have developed so differently over the past 25 yr or so. Suspended sediments were measured and wave characteristics were inferred from subsurface pressure data measured for 5 wk at bothSpartina sites and at an intermediate location. Bed-orbital speeds and frictional wave-energy dissipation were consistently lower at the easternmost site with the largerSpartina patches. The west-to-east reduction in wave energy is due to the spatial arrangement of theSpartina sites relative to the predominant wind fetches. The wave-energy gradient is maintained by tidal-cycle variations in fetch and bed friction and results in a west-to-east reduction in sand suspension. Silt, which is largely resuspended under southwest winds, is redeposited in the low wave-energy conditions in and around the larger site 1Spartina patches. Shell accumulation bySpartina patches at site 1 occurs infrequently, during southwest winds >10 m s⁻¹ and water depths >0.7 m, when waves are least attenuated by bed friction. Large between-site differences in the growth of and sediment accumulation by theSpartina patch are consistent with the observed wave-energy gradient. The resulting spatial patterns of silt, sand, and shell resuspension and deposition directly influence the rate of sediment accumulation bySpartina patches and the composition of accumulated sediment on this wave-exposed intertidal flat.     

John’s creek valley: a mountainous catchment for long-term interdisciplinary human-environment system research in Upper Styria (Austria)

The John’s creek valley (Johnsbachtal) is presented as a long-term, interdisciplinary cooperation platform in upper Styria (Austrian Alps) that brings together the interests and knowledge of persons with different backgrounds (scientists, teachers, students, as well as local actors and the population) with the central aim to generate mutual benefit for all involved parties. It covers an area of around 65 km² with elevations between 600 and 700 m in the valley to over 2,300 m in the summit regions. Annual mean temperature ranges from approximately 8 °C in the lower elevations of the valley to below 0 °C in the summit regions. Annual precipitation mounts to values of 1,500 mm and more than 1,800 mm in the lower elevations and summit regions, respectively. To allow for a long-term monitoring of the complex meteorological and hydrological conditions in the area, a hydroclimatological monitoring network has been installed that is described in detail in this paper. A special characteristic of the installed meteorological stations is that they cover a large range of altitudes and, therefore, allow to capture the gradients in meteorological variables induced by the complex Alpine topography. Furthermore, the hydroclimatological monitoring network in John’s creek valley is largely independent of regular third-party project funding, and therefore, not temporarily limited in its existence. A number of catchment research activities that cover a variety of disciplines (e.g., climatology, hydrology, (hydro)geology, geomorphology) and that largely benefit from the hydroclimatological data recorded in John’s creek valley are presented together with preliminary results. The latter include spatial distributions of meteorological and hydrological variables (e.g., precipitation, evapotranspiration and snowmelt) calculated for the test site using the hydrometeorological model AMUNDSEN. Furthermore, the results of hydrogeological investigations that have been carried out at the Etzbach spring are presented and discussed.     

Talc-garnet-kyanite-quartz schist from an eclogite-bearing terrane,Western Tasmania

Talc-garnet-kyanite-quartz schist occurs in an eclogite-bearing terrane in the Precambrian of Western Tasmania. It is argued that this rock was formed at a pressure of ? 10 kb and a temperature of 600°±20° C. Chemical zoning in the garnet and talc preserves evidence of increasing temperature during growth of the major minerals.     

Market access,population density,and socioeconomic development explain diversity and functional group biomass of coral reef fish assemblages

There is overwhelming evidence that many local-scale human activities (e.g. fishing) have a deleterious effect on coral reef fish assemblages. Our understanding of how broad social phenomena (e.g. socioeconomic development) affect the diversity and function of coral reef fish assemblages however, is still poor. Here, we use structural equation models to reveal how human population density, socioeconomic development, and market access affect fishing pressure and coral cover to, in turn, explain the diversity and biomass of key functional groups of reef fish assemblages within Solomon Islands. Fishing pressure is predominantly driven by both market access and local population density, and has a clear negative effect on the diversity and function of coral reef fishes. The strong positive effect of market access on fishing pressure makes clear the importance of understanding social-ecological linkages in the context of increasingly connected societies. This study highlights the need to address broad social phenomena rather than focusing on proximate threats such as fishing pressure, to ensure the continued flow of coral reef goods and services in this time of rapid global social and environmental change.     

Thermal Metamorphism in the trial harbour district,Tasmania

A Devonian granite complex intrudes Precambrian and Silurian siltstones and sandstones as well as (?) Cambrian volcanics and dunite.

Metamorphism of the Precambrian sediments is slight, and an andalusite‐bearing, pelitic hornfels is the only characteristic assemblage. The (?) Cambrian volcanics give rise to a variety of assemblages; (1) lime‐ and ferromagnesia‐rich (hypersthene — cummingtonite — labradorite; diopside — hornblende — labradorite); (2) magnesia‐rich (cordierite — hypersthene; cordierite — anthophyllite); (3) ultrabasic (olivine and/or pleonaste). Biotite (or phlogopite) is an almost invariable component, and garnet may also be present in these groups.

No significant metamorphism of the dunite is evident; minor development of veins and segregrations of aragonite, magnetite, phlogopite, brucite, chalcedony and antigorite may result from low‐grade hydrothermal activity Metamorphic assemblages in calcareous Silurian siltstones contain garnet, diopside, calcite and epidote.

A characteristic feature of the contact metamorphic aureole is the occurrence of diopside‐rich bodies in granite, volcanic hornfels, quartzite and dunite host rocks.     

Tectono-sedimentary evolution of the Upper Prealpine nappe (Switzerland and France): nappe formation by Late Cretaceous-Paleogene accretion

Abstract

The Upper Prealpine nappe of the Swiss and French Prealps consists of a composite stack of various tectonic slivers (Gets, Simme, Dranse and Sarine sub-nappes, from top to bottom). The structural superposition and stratigraphic content of the individual sub-nappes suggests a successive stacking at the South Penninic/Adriatic transition zone during the Late Cretaceous and Early Paleogene. The present paper deals with two aspects. (1) new data obtained from the Complexe de base Series of the Dranse sub-nappe which underlies the Helminthoid Sandstone Formation, and (2) the development of a geodynamic accretionary model for the Upper Prealpine nappe stacking.

The Complexe de base Series reveals a succession of black shales at the base, grading upward into variegated red/green and red shales which were deposited in an abyssal plain environment starved of clastic input. It is overlain by the Helminthoid Sandstone Formation. The combined analysis of planktic and agglutinated benthic foraminifera and comparisons with other Tethyan series suggest an Albian to Campanian age of the Complexe de base succession. Tectonic transport of the abyssal plain segment into a trench environment allowed for the stratigraphic superposition by the Helminthoid sandstone sequence. The present findings combine well with the general scheme of the Upper Prealpine nappe stack and several single results on parts of the nappe stack. We take that opportunity to present a comprehensive model for the tectono-sedimentary evolution of the Upper Prealpine nappe.

We suggest that Late Jurassic-Early Cretaceous asymmetric (?) extension at the South Penninic-Adriatic margin created an extensional alloehthon. Later during the mid-Cretaceous, the start of convergence drove the obduction of oceanic crust on the northern margin of the extensional allochthon. The resulting ophiolitic/continental source supplied clasts to the trench basin in front (Manche turbidite series), and the backarc basin (Mocausa Formation) and abyssal plain (Perrières turbidite series) to the South. During Middle to Late Coniacian the main Adriatic margin was thrusted over the obductionrelated mixed belt and established an incipient accretionary prism containing the former trench, backarc and abyssal plain basin fill series. During this stage the Gueyraz (melange) Complex formed, which separates the trench series from the retroarc and abyssal plain formations. On top of the incipient accretionary prism a forearc basin developed hosting the Hundsrück Formation. The frontal abyssal plain formation (Complexe de base) still received few turbiditic intercalations. From Campanian time on, the forearc basin was bypassed and deposition of the Helminthoid Sandstone Formation occurred on the Complexe de base succession. During the Maastrichtian the abyssal plain and trench fill succession (Dranse nappe) was accreted to the incipient wedge, and in front of a newly active buttress, the Gurnigel trench basin was established. Another accretionary event during latest Paleocene/earliest Eocene added parts of that trench series to the base of the wedge (Sarine nappe). During the Late Eocene the accretionary wedge and remaining trench fill series (Gurnigel nappe) were thrusted en-bloc over the Middle Penninic limestone nappes and partly overtook the latter. Continued shortening of the resulting nappe pile and out-of-sequence thrusting accomplished the overriding of the Middle Penninic units over the former South Penninic Gurnigel trench series (inversion of palaeogeographic domains).     

Radiometric evidence of the Kanimblan Orogeny in southeastern Queensland and the age of the Neranleigh-Fernvale group

Abstract

Conventional K-Ar geochronology and the ⁴⁰Ar/³⁹Ar method in which the ratio of radiogenic argon to postassium is determined by measurement of ³⁹Ar produced by neutron irradiation are used to document the occurrence of the Upper Carboniferous Kanimblan Orogeny in the D'Aguilar Block and Beenleigh Block of southeastern Queensland.

Incremental evolution of argon by the heating of an irradiated sample of Neranleigh-Fernvale argillite and ⁴⁰Ar/³⁹Ar measurements on two hornblendes from alaskite clasts in the Neranleigh-Fernvale Group suggest that part of this unit may be as young as Lower Carboniferous.