Multicomponent ionic diffusion in porewaters: Coulombic effects revisited

The diffusion of an ion in porewaters cannot occur independently of the other ions in solution as a result of Coulombic coupling, as well as from other effects not considered here. Unfortunately, a longstanding disagreement exists about the correct form and meaning of the equations that describe Coulombic coupling in porewaters, i.e., Ben-Yaakov [Am. J. Sci. 281 (1981) 974] vs. Lasaga [Am. J. Sci. 281 (1981) 981]. This paper re-examines this controversy by reformulating the problem starting from fundamental concepts of mass and charge conservation. We show that these antagonistic formulations are both valid and, in fact, equivalent, when the different interpretations of charge balance are resolved. Most of the disagreements between Ben-Yaakov and Lasaga are then shown to result from differing methods of solution, not fundamental disparities in their models. We note, however, that the explanation for the concept of “stationary” gradients of nonreacting ions as given Ben-Yaakov is inaccurate, and such gradients do lead to diffusive fluxes that are counterbalanced by electrochemical migrational fluxes to produce no net flux (excluding advective flux). We further find that the bicarbonate diffusive flux will not balance the diffusional charge flux of sulfate during its reduction if advection is present. This latter imbalance generates compensating fluxes in the other nonreacting ions. We have applied our theory to a simplified case of sulfate reduction in a marine sediment. The results show that nonreacting ions do diffuse and that with normally expected values of porewater advection, the ratio of the bicarbonate to the sulfate flux can be far different than the ideal value of −2.     

Impacts of Holocene climatic variations on alluvial fan activity below snowpatches in subarctic Québec

In the Lake Guillaume-Delisle area of subarctic Québec, storm-generated alluvial fans have been active sporadically throughout the Holocene. In this study, we propose that the persistence of late-lying snowpatches in fan catchments during Holocene cold episodes promoted alluvial fan activity by lowering the precipitation threshold required to trigger a torrential event. This hypothesis was tested by characterizing the depositional processes responsible for alluvial fan formation below snowpatches, and by reconstructing the Holocene alluvial fan activity. Stratigraphic and sedimentary analyses conducted on seven alluvial fans revealed that they were deposited by torrential activity leading to waterlaid, transient, or hyperconcentrated deposition. The chronology of the storm-generated alluvial fans — based on 22 radiocarbon dates — indicates that torrential activity was enhanced during the cooler Late Holocene (i.e., after ca. 3500 cal. yr BP). Snowier winters and cooler summers were beneficial to nival activity, allowing the persistence of larger snowpatches throughout the summer and fall seasons. Rainfall-induced thaw of such snowpatches during rainstorm events is inferred to have contributed to alluvial fan activity by increasing water availability. Three peaks of alluvial activity occurred during the Late Holocene (2950–2750, 1900–1400, and 800–300 cal. yr BP) and are indicative of increased storminess resulting in higher fan activity. Increased fan activity during cooler episodes was concurrent with increased runoff activity in the immediate pronival area. This stresses the importance of nivation below snowpatches and pinpoints the role of nivation in enhancing geomorphological activity during period of cooler and more humid climate in subarctic environments.     

Distribution of the organic matter in the channel-levees systems of the Congo mud-rich deep-sea fan (West Africa). Implication for deep offshore petroleum source rocks and global carbon cycle

The quantity and the source of organic matter preserved in the Recent turbiditic channel-levees systems around 4000 m-depth off the Congo River were determined using bulk geochemical approaches (Rock-Eval, elemental and isotopic analyses) as well as molecular and optical analyses on selected samples. These mud-rich sediments contain high amount of organic matter (3% Corg on average), the origin of which is a mixture of terrestrial higher-plant debris and deeply oxidized phytoplanktonic material. Although the relative contribution of continental source versus marine source of the organic matter cannot be precisely quantified, the continental fraction appears significant (at least 70–80%) especially for such depths and distances from the coast. The organic matter distribution appears very homogeneous at different scales, from the single turbiditic event to the entire levee, and changes in accumulation rates have a little impact on the quantity and quality of preserved organic matter.     

On the use of current meter data to assess the realism of ocean model simulations

The evaluation of ocean simulations against observed datasets is essential to assess their realism and to guide model development, but often remains qualitative, and ignores certain datasets. This paper presents a three-dimensional, quantitative comparison of a 1/6° Atlantic numerical simulation (CLIPPER) with the WOCE current meter dataset in terms of mean velocity and eddy kinetic energy. Our metrics reveal the good behaviour of CLIPPER open boundary conditions and forcing with respect to full-depth current records. Due to its still moderate resolution, however, the model globally underestimates the observed mean speeds and eddy activity. This discrepancy is barely noticeable at low latitudes but increases toward the poles, probably since the poleward decrease of the Rossby radius exceeds that of the horizontal grid step. At least in this eddy-admitting regime, it is suggested that the numerics of geopotential-coordinate models like ours dissipate mean and eddy momentum at depth and adversely affect current–topography interactions.     

On the use of Atterberg limits on marine soils

Abstract

On the basis of the Atterberg indexes of various sediments collected in the Mediterranean Sea, we select two major parameters indicative of the mechanical behavior of marine soils: the sedimentary facies (i.e., mechanism of deposition expressed by silt content) and the clay mineral association characterized by smectite content in the fraction finer than 2 μm. Activity and real thixotropic ability appear to be particularly important parameters in marine engineering; better values are obtained by a double test operation in distilled and marine water.     

Small-scale, high-precision and high-accuracy determination of Poisson’s ratios in cohesive marine sediments

Poisson’s ratio (static) appears as a parameter in models of soft-sediment geomechanical processes such as gas bubble formation and bioturbation, and in a number of practical applications, including acoustic imaging, but is rarely measured in soft near-surface (upper 20 cm) marine sediments. A new uniaxial apparatus was developed to assess Poisson’s ratios of cylindrical samples of soft cohesive sediments under finite-strain, unconfined, undrained conditions. No constraining membrane around the sample is necessary in the instrument. By monitoring the fluid level in a capillary, changes in sample volume can be determined to high precision (reproducibility). Measurements on reference materials, i.e., gelatine and polyurethane, also indicate high accuracy (veracity). For natural sediments from Nova Scotia, Canada, Poisson’s ratios range from 0.4951 to 0.5 with no indication of anisotropy; therefore, such sediments act as incompressible solids to short-term/small-magnitude stresses, as occur during bubble formation and infaunal movement.     

A new mammalian fauna from the earliest Eocene (Ilerdian) of the Corbières (Southern France): palaeobiogeographical implications

A new mammal fauna from the earliest Eocene of Le Clot (Corbières, Southern France) is described. Some taxa identified there, such as Corbarimys hottingeri and Paschatherium plaziati, allow a correlation with the previously described Corbières fauna of Fordones. Moreover, the presence at Le Clot of Lessnessina praecipuus, which is defined in Palette (Provence, Southern France) allows correlating both localities. All three of these localities are referred to the MP7 reference level, even if a direct correlation with the type locality of MP7 (Dormaal, Belgium) is not ascertained. A Southern Europe biochronological sequence is proposed for the beginning of the Eocene: Silveirinha, Fordones/Palette/Le Clot, Rians/Fournes. The diagnosis of a new species of a neoplagiaulacid multituberculate (?Ectypodus riansensis nov. sp.) is proposed. From a compilation of data concerning the earliest Eocene faunas from both Northern Europe and Southern Europe, we conclude that two faunas corresponding to two distinct palaeobiogeographical provinces existed in Western Europe. This faunal disparity, probably related to climatic differences, makes correlations particularly difficult between the two provinces.     

Wrench tectonics flip at oblique subduction. A model from New Zealand

In eastern North Island New Zealand, oblique subduction of the Pacific Plate beneath the Australian Plate is associated with strain partitioning. Dextral along-strike component of displacement occurred first at Early Miocene major faults within the eastern fore-arc domain. These faults were active from Early Miocene to Pliocene times. Since Pliocene times, most of the movement occurs at western faults such as the Wellington Fault. The latter joins the back-arc domain to the north. The jump of wrench faulting is related to the oblique opening of the back-arc domain. Both phenomena are impeded southwards by the Hikurangi oceanic plateau entering the subduction zone. To cite this article: J. Delteil et al., C. R. Geoscience 335 (2003).     

Ilmenite composition in the Tellnes Fe–Ti deposit,SW Norway: fractional crystallization,postcumulus evolution and ilmenite–zircon relation

Major and trace element XRF and in situ LA-ICP-MS analyses of ilmenite in the Tellnes ilmenite deposit, Rogaland Anorthosite Province, SW Norway, constrains a two stage fractional crystallization model of a ferrodioritic Fe-Ti-P rich melt. Stage 1 is characterized by ilmenite-plagioclase cumulates, partly stored in the lower part of the ore body (Lower Central Zone, LCZ), and stage 2 by ilmenite-plagioclase-orthopyroxene-olivine cumulates (Upper Central Zone, UCZ). The concentration of V and Cr in ilmenite, corrected for the trapped liquid effect, (1) defines the cotectic proportion of ilmenite to be 17.5 wt% during stage 1, and (2) implies an increase of D _V^Ilm during stage 2, most likely related to a shift in fO₂. The proportion of 17.5 wt% is lower than the modal proportion of ilmenite (ca. 50 wt%) in the ore body, implying accumulation of ilmenite and flotation of plagioclase. The fraction of residual liquid left after crystallization of Tellnes cumulates is estimated at 0.6 and the flotation of plagioclase at 26 wt% of the initial melt mass. The increasing content of intercumulus magnetite with stratigraphic height, from 0 to ca. 3 wt%, results from differentiation of the trapped liquid towards magnetite saturation. The MgO content of ilmenite (1.4–4.4 wt%) is much lower than the expected cumulus composition. It shows extensive postcumulus re-equilibration with trapped liquid and ferromagnesian silicates, correlated with distance to the host anorthosite. The Zr content of ilmenite, provided by in situ analyses, is low (<114 ppm) and uncorrelated with stratigraphy or Cr content. The data demonstrate that zircon coronas observed around ilmenite formed by subsolidus exsolution of ZrO₂ from ilmenite. The U-Pb zircon age of 920 ± 3 Ma probably records this exsolution process. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.