A pilot study of genetic differentiation between two phenotypes of a Mediterranean population of the bivalve Cerastoderma glaucum and genetic discrimination with other Cerastoderma glaucum and Cerastoderma edule populations outside the Mediterranean

The internal transcribed spacer 1 (ITS1) region of 29 individuals of Cerastoderma glaucum (from the Mediterranean Sea, the Atlantic and the North Sea) and 18 individuals of Cerastoderma edule (from the Atlantic and the North Sea) and the cytochrome c oxidase subunit I (COI) region of 43 individuals of C. glaucum (from the Mediterranean Sea, the Atlantic and the North Sea) and 9 individuals of C. edule (from the Atlantic and the North Sea) were PCR amplified and sequenced. The ITS1 sequences led us to describe 27 genetic haplotypes, while 21 genetic haplotypes were determined via the COI sequences. The ITS1 and the COI sequences revealed an important genetic variability within the Mediterranean population of C. glaucum, which contained two different phenotypes: orange foot and yellow foot. A genetic differentiation between the two phenotypes was revealed by the nucleotide diversity index (π) and is strengthened by the AMOVA analysis. This result leads us to suspect the presence of two different groups in the same population of C. glaucum. Nevertheless to be confirmed this hypothesis requires further studies using more locations and a larger number of sample sizes.     

Channel mobility drives a diverse stratigraphic architecture in the dryland Mojave River (California,USA)

The links between flood frequency and rates of channel migration are poorly defined in the ephemeral rivers typical of arid regions. Exploring these links in desert fluvial landscapes would augment our understanding of watershed biogeochemistry and river morphogenesis on early Earth (i.e. prior to the greening of landmasses). Accordingly, we analyse the Mojave River (California), one of the largest watercourses in the Great Basin of the western United States. We integrate discharge records with channel-migration rates derived from dynamic time-warping analysis and chronologically calibrated subsidence rates, thereby constraining the river's formative conditions. Our results reveal a slight downstream decrease in bankfull discharge on the Mojave River, rather than the downstream increase typically exhibited by perennial streams. Yet, the number of days per year during which the channel experiences bankfull or higher stages is roughly maintained along the river's length. Analysis of historical peak flood records suggests that the incidence of channel-formative events responds to modulation in watershed runoff due to the precipitation in the river's headwaters over decades to centuries. Our integrated analysis finally suggests that, while maintaining hydraulic geometries that are fully comparable with many other rivers worldwide, ephemeral desert rivers akin to the Mojave are capable of generating a surprisingly wide range of depositional geometries in the stratigraphic record. © 2020 John Wiley & Sons, Ltd.     

On the uniqueness of image reconstruction from the amplitude of radiointerferometric response

The theorem is proved that presents a rigorous foundation of the possibility of unique reconstruction of the radio-image of the sourceI(r) from the modulus of visibility function |V(b|=|Î(r)|. This results gives a rigorous explanation of the efficiency of different numerical methods of the image reconstruction using only amplitude data which are widespread in radio-astronomy.     

The singularities in quantum cosmology

A cosmological model is proposed, in which quantum effects lead to infinitely many terms nonlinear in curvature, and these terms lead to the following conclusion: the physical singularity (i.e., a state with infinite matter densityp) occurs int10^–43 s, when the curvature is finite. An attempt is made to give physical interpretation of this model from the viewpoint of the foam-like model of space-time.     

High-density early CO2 fluids in the ultrahigh-temperature granulites of Ihouhaouene (In Ouzzal, Algeria)

Fluid inclusion studies in rocks from the Lower Proterozoic granulites from western Hoggar (Algeria) provide new evidence for the hypothesis that a CO₂-rich, H₂O-poor fluid was present during the high-grade metamorphism. CO₂ inclusions represent the main fluid trapped in the Ihouhaouene ultrahigh-temperature (over 1000 °C) and high-pressure (10 to 14 kbar) granulites. The microthermometric and Raman microspectrometric measurements indicate that the carbonic fluid is mainly composed of CO₂ with minor amounts of CH₄ and N₂ detected in some inclusions (< 4 mol% CH₄). Carbonic fluid densities range from 1.18 to 0.57 g/cm³. The highest densities are recorded in superdense carbonic inclusions presenting evidence of the earliest trapping and they correspond to the fluid densities expected for the P–T conditions of the peak of metamorphism in the area previously determined from mineral geothermobarometers. Lower densities of carbonic fluids mainly result from the reequilibration of earlier trapped fluid inclusions during retrograde metamorphism and final uplift of the metamorphic terrane, but a new influx of carbonic fluids during the retrograde event remains possible. Carbonic fluids can be produced in situ from decarbonation reactions in interlayered impure marbles during the prograde event or derived from CO₂ flushing from underlying basic intrusions. The aqueous fluids present large variations of composition (0.5 to 30 wt.% NaCl equivalent) and densities (1.16 to 0.57 g/cm³). They clearly correspond to post-metamorphic fluids because they mainly occur along microfractures, they do not show any evidence of immiscibility with the carbonic fluids and mixed aquo-carbonic inclusions have not been observed. The percolation of aqueous fluids is related to the Pan-African tectonometamorphic event.     

Presentation of RISK-UE Project

This paper is a presentation of an European project called RISK-UE, entitled: “An advanced approach to earthquake risk scenarios with applications to different European towns”. It gives the origin, the objectives and the organisation of the project, together with the content of the different workpackages comprising methodological aspects: different features of European town, seismic hazard, urban system exposure, vulnerability of current, historical and monumental buildings, vulnerability of lifelines and essential facilities, seismic risk scenario, with an application to the seven following cities: Barcelona, Bitola, Bucharest, Catania, Nice, Sofia and Thessaloniki. These studies were realized in close relation with the decisionmakers of these cities, in order that they implement Risk Management Plans and Plans of Action to effectively reduce seismic risk.     

Tin–polymetallic sulfide deposits in the eastern part of the Dachang tin field (South China) and the role of black shales in their origin

The Dafulou and Huile vein and stratabound cassiterite-sulfide deposits and sheeted ore veins at the Kangma cassiterite-sulfide deposit are located in the eastern part of the Dachang tin field. These deposits are hosted in a sedimentary sequence containing significant concentrations of organic matter in the form of Lower Devonian calcareous black shales and hornfels. These rocks together with the younger intrusion of Longxianggai granite (91DŽ Ma) actively participated in the formation of Sn-polymetallic deposits. The following three major stages have been distinguished in stratiform and vein-type orebodies at Dafulou, Huile and Kangma: stage I (cassiterite, pyrrhotite, arsenopyrite, tourmaline, carbonate), stage II - main sulfide stage (quartz, cassiterite, arsenopyrite, pyrrhotite, sphalerite, stannite, pyrite, carbonates) and stage III (native Bi, galena, electrum, sulfosalts). Stage IV (post-ore), recognized at Huile is represented by barren carbonates and zeolites. Whole rock geochemistry has revealed that at Dafulou, Bi and Cu correlate strongly with S, whereas V and Pb correlate well with C_org (organic carbon). The similar distribution patterns of selected elements in average slightly mineralized low-Ca black shales indicate a fluid composition similar for all deposits studied. Studies of graphitization of the organic matter in black shales adjacent to orebodies indicate that d₍₀₀₂₎ and FWHM (full width in half maximum)/peak height values gradually decrease in the following sequence: Dafulou deposit M Kangma deposit M Huile deposit. The pyrolysate of wall rocks at the Dafulou deposit is relatively enriched in asphaltenes and maltenes (55.6-72.0% of the pyrolysate) comparable with pyrolysate obtained from more distal black shales (19.2-28.5%). Typical GC-MS spectra of pyrolysate from distal black shales are dominated by alkanes in the n-C15 to n-C25 range, aromatic molecules being represented mostly by alkyl-naphthalenes. In contrast, only traces of aliphatic hydrocarbons in the n-C14 to n-C18 range and elemental sulfur were identified in pyrolysates from pyrrhotitized wall rocks. The earliest fluid inclusions of the studied system occur in the quartz-tourmaline-cassiterite assemblage of stage I at Dafulou. These inclusions are H₂O-CO₂-CH₄-rich, with 10 to 20 vol% of aqueous phase. P-T conditions of the trapping of inclusions are estimated to be up to 400 °C and 1.3 to 2.0 kbar (between 5.0 and 7.5 km under lithostatic pressure). In contrast, the presence of a low density gaseous CO₂-CH₄ phase indicates relatively low pressures during the formation of the breccia-type quartz-calcite-cassiterite-sulfide mineralization (stage II), when P-T conditions probably reached approx. 380 to 400 °C and 0.6 kbar (up to 6 km under hydrostatic pressure). Fluid inclusion data and oxygen isotope thermometry indicate that cassiterite-sulfide ores of the main sulfide stage (stage II) formed from aqueous-carbonic fluid (CO₂/CH₄ =ᄺ) at temperatures of up to 390 °C at Dafulou and in a temperature range of 250 to 360 °C at Huile and 260 to 370 °C at Kangma. The '³⁴S values of sulfides from Dafulou range mostly between -1 and -6‰, whereas sulfides from the Kangma and Huile deposits are characterized by more negative '³⁴S values (between -8 and -11‰, and between -9 and -12‰, respectively). These data suggest that bacteriogenic sulfides of black shales were a dominant source of reduced sulfur for epigenetic (vein and replacement) mineralization. Oxygen isotopic compositions of five quartz-cassiterite pairs from Dafulou and Huile show a relatively narrow range of calculated oxygen isotope temperatures (250-320 °C, using the equation of Alderton 1989) and high '¹⁸O_fluid values between +8 and +10‰ (SMOW), which are in agreement with fluid derivation from and/or high temperature equilibration with the Longxianggai granite. The carbon and oxygen isotope composition of carbonates reflects variable carbon sources. Stage I calcite is characterized by narrow ranges of '¹³C (-7.0 to -9.5‰ PDB) and '¹⁸O (+15.0 to +17.5‰ SMOW). This calcite shows ubiquitous deformation, evidenced by intense development of twins. Fluid compositions calculated at 330 °C for the Dafulou and Huile deposits and at 270-300 °C for the Kangma deposit ('¹⁸O_fluid between +10.0 and +11.5‰ SMOW, '¹³C_fluid between -5.5 and -7.5‰ PDB), agree with fluid derivation from and/or equilibration with the peraluminous, high-'¹⁸O Longxianggai granite and suggest a significant influence of contact metasedimentary sequences (carbon derived from decomposition and/or alteration of organic matter of calcareous black shales). The '¹³ C values of organic matter from the Lower to Upper Devonian host rocks at the Dafulou deposit (-24.0 and -28.0‰) fit with a marine origin from algae. However, organic matter adjacent to the host rock-ore contact displays a slight enrichment in ¹³C. The organic carbon from the Huile and Kangma deposits is even more ¹³C enriched (-24.6 to -23.5‰). The most heavy '¹³ C values (-16.5‰) were detected in hornfels sampled at the contact of the Upper Devonian sediments with the Longxianggai granite. The '¹³C data broadly correlate with the degree of structural ordering (degree of graphitization) of organic matter, which indicates that both variables are related to thermal overprint.     

Scales of columnar jointing in igneous rocks: field measurements and controlling factors

Columnar jointing is a common feature of solidified lavas, sills and dikes, but the factors controlling the characteristic stoutness of columns remain debated, and quantitative field observations are few in number. In this paper, we provide quantitative measurements on sizing of columnar joint sets and our assessment of the principal factors controlling it. We focus on (1) chemistry, as it is the major determinant of the physical (mechanical and thermal) properties of the lava, and (2) geology, as it influences the style of emplacement and lava geometry, setting boundary conditions for the cooling process and the rate of heat loss. In our analysis, we cover lavas with a broad range of chemical compositions (from basanite to phonolite, for six of which we provide new geochemical analyses) and of geological settings. Our field measurements cover 50 columnar jointing sites in three countries. We provide reliable, manually digitized data on the size of individual columns and focus the mathematical analysis on their geometry (23,889 data on side length, of which 17,312 are from full column sections and 3,033 data on cross-sectional area and order of polygonality). The geometrical observations show that the variation in characteristic size of columns between different sites exceeds one order of magnitude (side length ranging from 8 to 338 cm) and that the column-bounding polygons’ average order is less than 6. The network of fractures is found to be longer than required by a minimum-energy hexagonal configuration, indicating a non-equilibrium, geologically quick process. In terms of the development and characteristic sizing of columnar joint sets, our observations suggest that columns are the result of an interplay between the geological setting of emplacement and magma chemistry. When the geological setting constrains the geometry of the emplaced body, it exerts a stronger control on characteristic column stoutness. At unconstrained geometries (e.g. unconfined lava flows), chemistry plays the major role, resulting in stouter columns in felsic lavas and slenderer columns in mafic lavas.     

Sur la mesure de l'intensité du champ magnétique terrestre et la distribution du magnétisme dans les aimants

The measurement of the horizontal component, H, of the geomagnetic field represents an important part of geomagneticians work from 1830 to the end of the 19th century. This measurement remained difficult at the required accuracy of ${10}^{\mathrm{?9}}\text{T}$ (1 nT or $1\gamma$), till the advent of proton and optical pumping magnetometers in geomagnetic observatories, around 1955. The measurement of H consisted in determining the mutual torque between two cylindrical magnets, by measuring either oscillation periods or angular deviations. Poisson was the first, indisputably, to propose the general principle of the measurement, in 1825. But Gauss, some years later (1832), successfully operated his famous oscillation–deviation method, described since then in all the elementary manuals of physics. The computation of the mutual torque depends on the tri-dimensional distribution of the magnetization in each one of the magnets. In the absence of an accurate-enough knowledge of these distributions, Poisson, Gauss, and their successors showed how to make the computations with a minimum number of hypotheses on them. Nevertheless physicists, in particular French ones, worked on the ‘distribution of magnetism’ in magnets; the first of them was Coulomb. We come back to this question through experiments conducted in the magnetic observatory of Chambon-la-Forêt, France. To cite this article: B. Leprêtre, J.-L. Le Mouël, C. R. Geoscience 337 (2005).     

Assessing debris flow hazards associated with slow moving landslides: methodology and numerical analyses

Clayey slow-moving landslides are characterized by their capability to suddenly change behaviour and release debris-flows. Due to their sediment volume and their high mobility, they are far more dangerous than those resulting from continuous erosive processes and associated potential high hazard magnitude on alluvial fans. A case of transformation from earthflow to debris-flow is presented. An approach combining geomorphology, geotechnics, rheology and numerical analysis is adopted. Results show a very good agreement between the yield stress values measured by laboratory tests, in the field according to the morphology of the levees, and by back-analyses using the debris-flow modelling code, Bing. The runout distances and the deposit thickness in the depositional area are also well reproduced. This allows proposing debris-flow risk scenarios. Results show that clayey earthflows can transform under 5-years return period rainfall conditions into 1 km runout debris-flows of volumes ranging between 2,000 to 5,000 m³.