Impact of the 11 March 2011, Great East Japan earthquake and tsunami on the chemical industry

The Great East Japan earthquake and tsunami damaged or destroyed many industrial facilities housing or processing hazardous substances, such as refineries, petrochemical facilities and other types of chemical industry. This showed that also generally well prepared countries are at risk of suffering natural hazard triggered technological (Natech) accidents. An analysis of data collected from open sources and through interviews with authorities was performed to understand the main reasons for the industrial damage and downtime as well as the extent of hazardous-materials releases and the associated impact on society. The analysis of the data set confirmed the findings from other studies with respect to main damage and failure modes, as well as hazardous-materials release paths. In addition, gaps in Natech risk management were identified. Based on the data analysis and interviews lessons learned in support of a more far-reaching Natech risk management are presented.     

Chemical and structural study of 1M- and 2M 1-phlogopites coexisting in the same Kasenyi kamafugitic rock (SW Uganda)

In the present work, crystal chemical variations between 1M and 2M ₁ phlogopites coexisting in the same rock sample from kamafugite of Kasenyi (southwest Uganda, west branch of the East African Rift) were explored by electron probe microanalyses, single crystal X-ray diffraction and M?ssbauer spectroscopy. Chemical analyses revealed close similarity both within and between the two polytypic arrangements as well as high TiO₂ (~4.9?wt%) and Al₂O₃ (~12.9?wt%), and low Cr₂O₃ (~0.8?wt%), F (~0.3?wt%) and BaO (~0.2?wt%) contents. Room temperature ⁵⁷Fe M?ssbauer investigation proved that the studied mica is a tetraferriphlogopite with: ^IVFe³⁺?=?19(1)?%, ^VIFe²⁺?=?58(1)?%, ^VIFe³⁺?=?23(1)?%. Single crystal refinement showed that both polytypes have narrow range of variation in terms of some relevant unit cell parameters and similar values in terms of mean bond lengths, mean atomic numbers and distortion parameters. Similar substitutions were active in the structure of the 1M and 2M ₁ studied phlogopites. However, in 2M ₁ polytypes the oxy-type substitutions were found to occur to a greater extent. Comparison of unit layer of 1M mica (in the 2M ₁ setting) with that of the 2M ₁ ones showed that the 2M ₁ polytypes are affected to different extent by relative shifts of the upper and lower triads of octahedral oxygens along the ±b directions. This effect did not cause any symmetry lowering in the T-O-T layer of the studied samples.     

A well‐established Early–Middle Pleistocene marine sequence on south‐east Zakynthos island,western Greece: Magneto‐biostratigraphic constraints and palaeoclimatic implications

The chronostratigraphy of a long, onshore Early–Middle Pleistocene marine sedimentary sequence on the south‐east part of Zakynthos island, Greece, is presented. Correlation of the succession with the isotope record of Ocean Drilling Program Site 963 reveals the combined influence of tectonics and eustacy in this area. The sequence is divided into three formations by two main unconformities that apparently relate to sea‐level lowstands associated with two major northern hemisphere glaciations, those of marine isotope stages (MIS) 22 and 12. The Zakynthos sequence in many ways is comparable with the Italian Valle di Manche section. Magnetostratigraphic and rock magnetic analyses, supported by biostratigraphy, document the position of the Matuyama/Brunhes Chron boundary (0.77 Ma), the top and base of the Jaramillo Subchron (0.99–1.07 Ma), the Cobb Mountain Subchron (1.173–1.185 Ma) and the top of the Olduvai Subchron (1.78 Ma). The underlying strata are constrained exclusively by detailed nannofossil biostratigraphy extending at least to the lowermost Pleistocene at around 2.54 Ma and therefore certainly incorporating the base of the Olduvai Subchron (1.95 Ma) and possibly the Gauss/Matuyama Chron boundary (2.58 Ma). In addition, a remarkable increase in sedimentation rate (from 3.2 and 28 cm ka^?1 to 167 cm ka^?1) and hence resolution above the Matuyama/Brunhes boundary (Middle Pleistocene) reveals one short‐lived magnetic excursion, possibly 17a (0.66 Ma), within the normal polarity Brunhes Chron. Copyright © 2011 John Wiley & Sons, Ltd.     

Weakening climatic signal since mid-20th century in European larch tree-ring chronologies at different altitudes from the Adamello-Presanella Massif (Italian Alps)

Tree rings from temperature-limited environments are highly sensitive climate proxies, widely used to reconstruct past climate parameters for periods prior to the availability of instrumental data and to analyse the effect of recent global warming on tree growth. An analysis of the climatic signal in five high-elevation tree-ring width chronologies of European larch (Larix decidua Mill.) from the tops of five different glacial valleys in the Italian Central Alps revealed that they contain a strong summer-temperature signal and that tree-ring growth is especially influenced by June temperatures. However, a moving correlation function analysis revealed a recent loss of the June temperature signal in the tree-ring chronologies. This signal reduction primarily involves the two lowest-altitude chronologies. It is probable that the observed increasing importance of late-summer temperature for tree-ring growth over the past 50 yr is an effect of the lengthening growing season and of the variations in the climate/tree-ring relationship over time. All the chronologies considered, especially those at the highest altitudes, show an increasing negative influence of June precipitation on tree-ring growth. The climatic signal recorded in tree-ring chronologies from the Italian Central Alps varies over time and is also differentially influenced by climatic parameters according to site elevation.     

Did the “Autochthonous” European foreland of Corsica Island (France) experience Alpine subduction?

Despite the important role played by the Sardinia‐Corsica block in the reconstruction of the Western Mediterranean geodynamics, the extent of involvement of the “Autochthonous” European margin exposed in Corsica (France) (i.e., Hercynian Corsica) in the Alpine orogeny remains uncertain. Stratigraphic and sedimentological studies in the post‐Variscan deposits on the Hercynian Corsica are scarce and even scarcer are the structural and metamorphic constraints. To face these uncertainties, we present new stratigraphic, structural and metamorphic data from the area of Razzo Bianco, Central Corsica, where a complete sequence belonging to the European continental margin is exposed. Field and structural investigations demonstrate that the sequence represents the easternmost edge of the downgoing European plate. Metamorphic studies on the Eocene deposits indicate that the margin was buried at depth up to blueschist facies conditions and, subsequently, it was progressively exhumed mainly through the activation of oblique top‐to‐the NW shear zones.     

Fluid Geochemistry as Indicator of Tectonically-Related,Deep Water Circulations in the Sardinian Rift-Campidano Graben (Italy): New Insights from Environmental Isotopes

The EC funded Geochemical Seismic Zonation program (EEC GSZ Project 1996–1998) chose Sardinia as a low-seismicity site, in which the relationships between fluid geochemistry and seismo-tectonics had to be investigated and results compared with outcomes from other selected high-seismicity sites. A first article, examining the role of fault segmentation and seismic quiescence on the geochemical composition of groundwaters and gases, has already been presented (Angelone et al. 2005). This article deals with environmental isotopes which, together with selected hydrochemical data, give hints on tectonically-related fluid circulations. Four water-dominated hydrothermal systems were considered, all located along regional fault systems and discharging groundwaters belonging to the Na–HCO₃ and Na–Cl facies. In the considered systems, groundwater circulation takes place, principally, in the Palaeozoic Crystalline Basement (PCB), with the exception of the Logudoro system, where hydrological circuits develop in the Mesozoic Carbonate Platform (MCP). The high CO₂ contents, the non-attainment of fluid-rock equilibrium and the large lithological variability prevent the construction of a unique hydrogeological–geochemical conceptual model. In this case, stable isotopes provide a useful tool to describe the origin of fluids and their subterranean movements. Stable isotopes of water, integrated with hydrochemical data, indicate that fluids are derived from three main end members. The dominant component is a relatively recent local meteoric water; the second one is marine water; and the third one is a fossil freshwater, depleted in heavy isotopes with respect to modern rains. The latter end member entered the aquifer system in the past, when climatic conditions were greatly different from today. At least two circulation systems can be recognised, namely a shallow cold system and a deep hydrothermal system, as well as two distinct hydrological processes: (1) gravity-controlled descent of cold water towards greater depths and (2) convection linked to a thermal gradient, causing deep fluids to rise up from the hydrothermal reservoir towards the surface. The highly variable δ¹³C_TDIC values suggest the presence of two distinct CO₂ sources, namely, a biogenic one and a thermogenic one. The relation between the isotopic compositions of CO₂ and He indicates an increased mantle signature in uprising CO₂-rich fluids.     

Multidisciplinary inferences on a newly recognized active east‐dipping extensional system in Central Italy

We use a multidisciplinary approach to gather preliminary evidence for a Quaternary east‐dipping extensional detachment in Central Italy. This structure crops out in the Sabini‐Eastern Simbruini (SES) and would be hidden at mid‐crustal depths beneath the L'Aquila 2009 (M_w6.3) epicentral area. The SES geometry is reconstructed through geological mapping, structural analysis and seismic line interpretation. The geometry of the mid‐crustal segment, referred to as the Ocre Segment (OS), is interpreted through seismological analyses of the largest aftershock (M_w5.4) of the L'Aquila 2009 sequence. The kinematic compatibility between the SES and the OS under a common SW–NE tensional field is tested through stress inversion of both geological and seismological data. The reliability of OS activation is tested through slip tendency analysis. Like other Italian cases, the SES and the OS are preliminarily interpreted as expressions at different depths of the same unknown east‐dipping extensional detachment, characterized by a ramp–flat–ramp geometry.