Petrology and microstructure of distal impact ejecta from the Flinders Ranges,Australia

Abstract— The Acraman impact ejecta from Bunyeroo Gorge in the central Flinders Ranges consist of clast-bearing and sandy sublayers set in a shale host rock. A calculated transient crater diameter for the Acraman impact of at least 34 km was obtained from average thicknesses and estimated distances of the ejecta from the impact in the Gawler Ranges. The ejecta contain numerous grains of quartz and zircon that display impact-produced features, including one or more sets of decorated planar deformation features. There is also much unshocked material incorporated in the ejecta layer. The coarse-grained ejecta layer embedded within fine-grained sediments allowed easy passage for diagenetic fluids that produced a porous honeycomb structure in the clays and enhanced the content of elements such as Cu, Pb, Zn, and U. The clay fraction of the ejecta layers consists of vermiculite and kaolinite, probably formed from alteration and weathering of glassy components. It appears that quartz and zircon grains are the only remnants unaltered by diagenetic processes.     

A METHOD TO CORRECT YIELD SURFACE DRIFT IN SOIL PLASTICITY UNDER MIXED CONTROL AND EXPLICIT INTEGRATION

When applying an explicit integration algorithm in e.g. soil plasticity, the predicted stress point at the end of an elastoplastic increment of loading might not be situated on the updated current yield surface. This so-called yield surface drift could generally be held under control by using small integration steps. Another possibility, when circumstances might demand larger steps, is to adopt a drift correction method. In this paper, a drift correction method for mixed control in soil plasticity, under drained as well as undrained conditions, is proposed. By simulating triaxial tests in a Constitutive Driver, the capability and efficiency of this correction method, under different choices of implementation, have been analysed. It was concluded that the proposed drift correction method, for quite marginal additional computational cost, was able to correct successfully for yield surface drift giving results in close agreement to those obtained with a very large number of integration steps. © 1997 by John Wiley & Sons, Ltd.     

Fungal air contamination in distinct sites within a municipal landfill area

Municipal wastes collected in landfills are a significant source of air contamination and frequently characterize by elevated concentrations of different fungi. Posing a serious health threat to landfill workers and local residents, the fungal aerosol has to be monitored with respect to its quantity and quality. In this study, concentrations of airborne fungi, their particle size distribution, species composition and the presence of cytotoxic strains of Aspergillus fumigatus were assessed in different sites within the landfill area. The quantitative and qualitative changes in the fungal aerosol were determined with respect to a season and landfill activity level (i.e. exploitation or standstill periods). Within the landfill area, particular sites were grouped with regard to airborne fungi concentrations and similarities in species composition. The qualitative analysis indicated that 43 species were shared during both sampling times, and only nine species were characteristic for the standstill period. Among fungal isolates, 21 strains of A. fumigatus revealed cytotoxic activity expressed at different levels, depending on the fungal extract concentrations used in the MTT assay. The results suggested that exposure (especially in summer) to small airborne particles, containing distinct species, may occur not only in the active sector but also in close vicinity to the landfill. Hence, microbial monitoring of the landfill and surrounding area should be carried out taking into account both quantitative aspect supplemented by size distribution analysis and qualitative features, especially of those strains possessing cytotoxic activity.     

The human impact on the transformation of juniper forest landscape in the western part of the Pamir-Alay range (Tajikistan)

Detailed analyses were conducted of human impact on juniper forest landscapes occurring within the Zarafshan Range (Pamir-Alay). Juniperus seravschanica and J. semiglobosa belong to forest-forming species in Central Asia. At present, juniper forests all over Tajikistan are seriously threatened as a result of excessive logging and cattle grazing. The aim of this paper is to present juniper forest transformation as a result of human activities as well as the diversity of soil properties in the organic and humus horizons in the altitudinal system of soil zonation. Three groups of phytocoenoses were distinguished: those with a dominant share of Juniperus seravschanica; those with a dominant share of J. semiglobosa; and mixed. Associations with Juniperus seravschanica and J. semiglobosa feature several variants of phytocoenoses with dominant species: Artemisia lehmanniana, A. dracunculus, Eremurus olgae, Festuca sulcata, Ligularia thomsonii, Stipa turkestanica, Thymus seravschanicus, and Ziziphora pamiroalaica. The collected soil samples differ in their granulometric composition. Gravelly cobble fractions >2 mm are dominant; the share of sandy particles <2 mm is much lower (about 10–20%). Fraction 0.5–0.05 attains 35% on average. The Corg content of the soil varied from 0.26 to 11.40% in the humus horizon (A) and from 4.3 to 25% in the organic (O). Similar relationships were reported in the case of Ntot concentration. A clear relationship can be observed between concentrations of Corg and Ntot. Soil pH varied, ranging from very low acidic (pH 5.5) to neutral (pH 8.5). The content of available P varied; high concentrations were noted in organic (O) (40.46–211 mg kg^?1) and mixed horizons (OA) (2.61–119 mg kg^?1). Maximum accumulations of Pavail (1739.6 mg kg^?1) and Ptot (9696 mg kg^?1) were observed at a site heavily affected by intense grazing. Concentrations of Mgavail varied from 116 to 964 mg kg^?1. Most of the analysed soil profiles lacked an organic horizon; only thin humus occurred.     

Controls on the location,morphology and evolution of complex esker systems at decadal timescales,Breiðamerkurjökull,southeast Iceland

This paper uses detailed mapping of eskers to address three questions which are important for reconstructing meltwater behaviour beneath contemporary and ancient ice masses: ‘What controls the morphology of simple and complex esker systems?’, ‘How do esker systems evolve through time?’ and ‘Are esker patterns compatible with groundwater controlled hydraulic spacing of esker tunnels?’. Esker crestlines and widths are mapped on the Breiðamerkurjökull foreland for eight time slices between 1945 and 2007, from high resolution (~50 cm) aerial photography, permitting their long‐term morphological evolution to be analysed in a high level of detail. We find that complex eskers develop where meltwater and sediment is abundant, such that sediment clogs channels, forming distributary eskers. Isolated eskers are simpler and smaller and reflect less abundant meltwater and sediment, which is unable to clog channels. Eskers may take several decades to emerge from outwash deposits containing buried ice and can increase or decrease in size when ice surrounding and underlying them melts out. It has been suggested that groundwater–channel coupling dictates the spacing between eskers at Breiðamerkurjökull. Our results do not dispute this, but suggest that the routing of sediment and meltwater through medial moraines is an additional important control on esker location and spacing. These results may be used to better understand the processes surrounding esker formation in a variety of geographical settings, enabling a more detailed understanding of the operation of meltwater drainage systems in sub‐marginal zones beneath glaciers and ice sheets. Copyright © 2015 John Wiley & Sons, Ltd.     

Implications of geomorphological research for recent and prehistoric avalanches and related hazards at Huascaran,Peru

Detailed research of superficial deposits below the northern peak of Huascaran (Cordillera Blanca) provides new information on the limits of a paleo-avalanche originating from this mountain. Geomorphological mapping of the sediments identified glacial deposits, deposits from historical rock-debris avalanches and huge boulders from a paleo-avalanche. Schmidt Hammer rock-hardness tests were used to distinguish between the several generations of rock-debris avalanches, but largely failed to distinguish between the much older moraine and the paleo-avalanche sediments. Thus, only the field geomorphological mapping proved to be reliable for identifying the limits of the paleo-avalanche. The limits identified as granite boulders deposited over volcanic rocks were found to extend 30 m further up the opposite valley slope than previously had been mapped. This larger extent implies a greater volume and/or greater mobility for the prehistoric event.     

ECHOBASE—A portable geographic fishery research database system

A geographic fishery research database system (GFRDBS), called ECHOBASE, for storing and management of data on pelagic fish resources from acoustic surveys and catch samples, combined with environmental data in a geographic context, has been developed. The system constitutes a portable and inexpensive yet powerful tool for fishery research and environmental monitoring and provides on‐board data processing and mapping capabilities.

Data are acquired from an echosounder, echo signal processor, environmental profiler (CTD probe), and Global Positioning System (GPS) receiver. The electronic digitized maps (based on C‐MAP public format files) provide active on‐screen nautical charts.

The basic GFRDBS platform is a portable PC 486 machine, which is used as an on‐board data acquisition and processing tool running under MS Windows 3.1 operating environment. The system is designed around the Borland's PARADOX package, which provides a relational database for managing acoustic, catch, and environmental data. The ECHOBASE programs were written in Borland C ++ language as a Windows application.     

A Novel Approach of Using Selected Unconventional Geodesic Methods of Estimation on VTS Areas

Abstract

The Vessel Traffic Service (VTS) systems belong to the fundamental tools used in ensuring a high level of safety across sea basins with heavy traffic, where the presence of navigational hazards poses a great risk of collision or a ship running aground. In order to determine the mutual location of ships, VTS systems obtain information from different facilities, such as coastal radar stations, AIS, and vision systems. Fixing a ship’s position is always accompanied by a degree of error, but the degree of error depends on the specific position fixing system used. In order to increase the accuracy of position fixing in VTS systems, the authors propose the use of contemporary geodetic methods. The article presents the theoretical fundamentals of two unconventional geodesic methods of estimation: M estimation and M_split(q)estimation and the authors’ own proposal of their application in VTS systems. The article concludes with a test verifying theoretical assumptions, performed with the use of a computer application allowing position fixing with the use of selected robust adjustment methods. Furthermore, an example is presented of M_split(q)estimation as used for the acquisition of low-signal radar echoes, which in VTS systems are not automatically identified for tracking. The level of the echo signal makes it difficult for a VTS controller to separate these objects from typical radar noise and interference.