Morphological development of the retention basin “Hartheim”: A case study

Flow in rivers and on floodplains is complex as it is affected by several interconnected factors such as topography, sediment transport and vegetation characteristics. The resulting processes are explained by the measure “Hartheim” planned for retention purposes at the Upper Rhine river. On the basis of existing formulas and instruments it is demonstrated that a good estimation of the development of the measure is possible. The proposed procedure is a useful tool for estimating morphological developments of restored river sections.     

Persistent Organic Pollutants (POPs) in Bottom Sediments of the Vistula River,Poland

The Vistula (Wisla) river, the biggest river in Poland, is 1038 km long and has a drainage area of 168 689 km². The river is strongly polluted by wastewaters. Big industrial plants are situated mainly in the upper part of the river, where it is slow‐flowing. This paper presents the results of the analysis of bottom sediment samples gathered from different locations along the Vistula river, from Kraków to Gdansk. The study was conducted in 2005. The following parameters were determined: chloroorganic pesticides, polychlorinated biphenyls (PCBs), chlorophenols, polycyclic aromatic hydrocarbons (PAHs), total organic carbon (TOC). The sum of chloroorganic pesticides was in the range of 2.0 to 77.5 ng/g d.w. (dry wet) with the highest values in the upper part of the river. p,p′‐DDT was found in the highest concentration. The sum of PCBs was in the range of 0.9 to 64.2 ng/g d.w. The sum of chlorophenols varied from 0.48 to 14.3 ng/g d.w. 2,4‐Dichlorophenol and pentachlorophenol occurred in the highest concentration. The sum of PAHs was in the range of 1552 to 7832 ng/g d.w. Phenantren was found in the highest concentration and antracen in the lowest. TOC values varied from 4.3 to 43.9 g/kg d.w. The concentrations of pesticides and PCBs were the highest in the upper part of the river and decreased along the course of the river, but the other determined compounds did not show this trend. However, the highest values occurred always in the upper part of the river.     

Isotopes,Microbes, and Turbidity: A Multi-Tracer Approach to Understanding Recharge Dynamics and Groundwater Contamination in a Basaltic Island Aquifer

Wells designated as groundwater under the direct influence (GUDI) of surface water have caused an ongoing boil-water advisory afflicting the island of Tutuila, American Samoa for almost a decade. Regulatory testing at these wells found turbidity and indicator bacteria spikes correlated with heavy rainfall events. However, the mechanism of this contamination has, until now, remained unknown. Surface water may reach wells through improperly sealed well casings, or through the aquifer matrix itself. In this study, three independent surface water tracers, turbidity, indicator bacteria, and water isotopes were used to assess recharge timing and determine contamination mechanisms. Results from each method were reasonably consistent, revealing average GUDI well breakthrough times of 37 ± 21 h for turbidity, 18 to 63 h for bacteria, and 1 to 5 days for water isotopes. These times match well with estimated subsurface flow rates through highly permeable aquifer materials. In contrast, where one well casing was found to be compromised, turbidity breakthrough was observed at 3 to 4 h. These results support local management decisions and show repairing or replacing wells will likely result in continued GUDI contamination. Additionally, differences in observed rainfall response for each tracer provide insight into the recharge dynamics and subsurface flow characteristics of this and other highly conductive young-basaltic aquifers.     

Earthquake fragmentation and slip processes: Spin and shear-twist wave mosaic

We follow our former considerations on rotational processes and emission of rotation and shear-twist waves as occurring in earthquake source zones. A concise presentation of the motion and constitutive relations is given for each type of the four fundamental point deformations: displacements, rotations, point stretch/squeeze, and string-string point deformations (shear nuclei).     

Frequency analysis of the 2004 Sumatra-Andaman earthquake using spectral seismograms

Frequency analysis of the Sumatra-Andaman earthquake of 2004, one of the most significant and best-recorded earthquakes, is based on spectral seismograms obtained from their broadband seismograms. The Sumatra-Andaman earthquake is found to have a wide-range frequency content of P-wave radiation during the rupturing process. On the basis of stacking spectral seismograms we distinguished four time events of the rupturing process of a total length of about 540 s. The frequency, f _max, is the highest for the first event (0.163 Hz in time interval 0–88 s), lowest for the second — which is the strongest (0.075 Hz in time interval 88–204 s). For third and fourth events frequencies are similar (0.089 and 0.082 Hz in time intervals 204–452 and 452–537 s, respectively). The frequency also shows an azimuthal dependence (±0.02 Hz). Azimuths for which the frequency, f _max, has maximum and minimum values are 203–222° and 23–42°, respectively. These observations are discussed in relation to previously published papers on this topic.     

Lithospheric structure of the Trans-European Suture Zone along the TTZ–CEL03 seismic transect (from NW to SE Poland)

The large-scale CELEBRATION 2000 seismic experiment investigated the velocity structure of the crust and upper mantle between western portion of the East European Craton (EEC) and the eastern Alps. This area comprises: the Trans-European Suture Zone, the Carpathian Mountains, the Pannonian Basin and the Bohemian Massif. This experiment included 147 chemical shots recorded by 1230 seismic stations during two deployments. Good quality data along 16 main and a few additional profiles were recorded. One of them, profile CEL03, was located in southeastern Poland and was laid out as a prolongation of the TTZ profile performed in 1993. This paper focuses on the joint interpretation of seismic data along the NW–SE trending TTZ–CEL03 transect, located in the central portion of the Trans-European Suture Zone. First arrivals and later phases of waves reflected/refracted in the crust and upper mantle were interpreted using two-dimensional tomographic inversion and ray-tracing techniques. This modelling established a 2-D (quasi 3-D) P-wave velocity lithospheric model. Four crustal units were identified along the transect. From northwest to southeast, thickness of the crust varies from 35 km in the Pomeranian Unit (NW) to 40 km in the Kuiavian Unit, to 50 km in the Radom–Łysogóry Unit and again to 43 km in the Narol Unit (SE). The first two units are thought to be proximal terranes detached from the EEC farther to the southeast and re-accreted to the edge of the EEC during the Early Palaeozoic. The origin of the remaining two units is a matter of dispute: they are either portions of the EEC or other proximal terranes. In the area of the Polish Basin (first two units), the P-wave velocity is very low (V_p < 6.1 km/s) down to depths of 15–20 km indicating that a very thick sedimentary and possibly volcanic rock sequence, whose lower portion may be metamorphosed, is present. The velocity beneath the Moho was found to be rather high, being 8.25 km/s in the northwestern portion of the transect, 8.4 km/s in the central sector, and 8.1 km/s in the southeastern sector.     

The influence of atmospheric circulation on the intensity of urban heat island and urban cold island in Poznań, Poland

The study has analyzed influence of an atmospheric circulation on urban heat island (UHI) and urban cold island (UCI) in Poznań. Analysis was conducted on the basis of temperature data from two measurement points situated in the city center and in the ?awica airport (reference station) and the data concerning the air circulation (Nied?wied?’s calendar of circulation types and reanalysis of National Centers for Environmental Prediction (NCEP)/National Center for Atmospheric Research (NCAR)). The cases with UHI constitute about 85 % of all data, and UCI phenomena appear with a frequency of 14 % a year. The intensity of UHI phenomenon is higher in the anticyclonic circulation types. During the year in anticyclonic circulation, intensity of UHI is 1.2 °C on average while in cyclonic is only 0.8 °C. The occurring of UHI phenomena is possible throughout all seasons of the year in all hours of the day usually in anticyclonic circulation types. The cases with highest UHI intensity are related mostly to nighttime. The cases of UCI phenomena occurred almost ever on the daytime and the most frequently in colder part of the year together with cyclonic circulation. Study based on reanalysis data indicates that days with large intensity of UHI (above 4, 5, and 6 °C) are related to anticyclonic circulation. Anticyclonic circulation is also promoting the formation of the strongest UCI. Results based on both reanalysis and the atmospheric circulation data (Nied?wied?’s circulation type) confirm that cases with the strongest UHI and UCI during the same day occur in strong high-pressure system with the center situated above Poland or central Europe.     

Carbon dioxide seasonality in dynamically ventilated caves: the role of advective fluxes

The seasonality in cave CO₂ levels was studied based on (1) a new data set from the dynamically ventilated Comblain-au-Pont Cave (Dinant Karst Basin, Belgium), (2) archive data from Moravian Karst caves, and (3) published data from caves worldwide. A simplified dynamic model was proposed for testing the effect of all conceivable CO₂ fluxes on cave CO₂ levels. Considering generally accepted fluxes, i.e., the direct diffusive flux from soils/epikarst, the indirect flux derived from dripwater degassing, and the input/output fluxes linked to cave ventilation, gives the cave CO₂ level maxima of 1.9 × 10⁻² mol m⁻³ (i.e., ∼ 440 ppmv), which only slightly exceed external values. This indicates that an additional input CO₂ flux is necessary for reaching usual cave CO₂ level maxima. The modeling indicates that the additional flux could be a convective advective CO₂ flux from soil/epikarst driven by airflow (cave ventilation) and enhanced soil/epikarstic CO₂ concentrations. Such flux reaching up to 170 mol s⁻¹ is capable of providing the cave CO₂ level maxima up to 3 × 10⁻² mol m⁻³ (70,000 ppmv). This value corresponds to the maxima known from caves worldwide. Based on cave geometry, three types of dynamic caves were distinguished: (1) the caves with the advective CO₂ flux from soil/epikarst at downward airflow ventilation mode, (2) the caves with the advective soil/epikarstic flux at upward airflow ventilation mode, and (3) the caves without any soil/epikarstic advective flux. In addition to CO₂ seasonality, the model explains both the short-term and seasonal variations in δ¹³C in cave air CO₂.

     

Large-Eddy Simulation of air Pollution Dispersion in the Nocturnal Cloud-Topped Atmospheric Boundary Layer

Effects of stratocumulus clouds on the dispersion of contaminants are studied in the nocturnal atmospheric boundary layer. The study is based on a large-eddy simulation (LES) model with a bulk parametrization of clouds. Computations include Lagrangian calculations of atmospheric dispersion of a passive tracer released from point sources at various heights above the ground. The results obtained show that the vertical diffusion is non-Gaussian and depends on the location of a source in the boundary layer.