Crustal structure in the southwestern part of the Iberian Peninsula

Seismic investigations to determine the crustal structure in the southwestern part of the Iberian Peninsula have been initiated in 1970. First experiments were carried out during July 1970, when a series of ten shots was fired off Cabo de Sines (Portugal) in shallow water and recorded up to distances of 185 km along a SE-profile towards Huelva (Spain). The profile was reversed in December 1970, when a series of twelve shots was fired off the south coast near Fuzeta (east of Faro) and recorded up to distances of about 260 km along a NW-profile towards Cabo da Roca west of Lisboa. A considerable increase in the seismic efficiency of the explosions could be achieved by generating standing waves in the water.

The structure deduced exhibits some peculiar features. Below the Palaeozoic sediments a fairly high velocity of 6.4 km/sec is found for the dome-shaped basement in that area. The lower crust, which is separated from the upper crust by a distinct velocity inversion (with a minimum velocity of about 5.3–5.6 km/sec), is characterized by a velocity of 7.1 km/sec. From the geological evidence and the sequence of seismic velocities it must be concluded that the upper crustal block in the southwestern part of the Iberian Peninsula has been uplifted by about 2–5 km since Permo-Triassic time, thus emphasizing the significance of vertical movement in tectonic activity.

The top of the upper mantle (8.15 km/sec) was detected at a depth of 30 km close to the Atlantic coast in the west, while near the Algarve coast in the south the depth to the M-discontinuity is about 34–35 km. This result in conjunction with studies of earthquake focal mechanisms confirms the suggestion that the Iberian block is being underthrust under the African plate.     

Towards medium-term (order of months) morphodynamic modelling of the Teign estuary, UK

The main objective of this paper is to address the principal mechanisms involved in the medium-term (order of months to years) morphodynamic evolution of estuaries through the application of a process-based numerical modelling. The Teign estuary (Teignmouth, UK) is the selected site. The system is forced by the macrotidal semi-diurnal tide in the English Channel and is perturbed to a minor extent by high river discharge events (freshets). Although waves have a definite influence on the adjacent coastal area, Wells (Teignmouth Quay Development Environmental Statement: Changes to Physical Processes. Report R.984c:140. ABP Marine Environmental Research Ltd., Southampton, 2002b) suggested that swell waves do not enter the estuary. Hence, wave effects are neglected in this study, as only tides and the river discharge are taken into account. The sediment grain size is highly variable, but mainly sandy. Within the frame of the COAST3D project (), four bathymetric surveys of the adjacent coastal area were carried out at a nearly weekly intervals. The outer estuary and the adjacent coastal area were also surveyed every 6 months as part of the COASTVIEW project (). Based on these data and on continuously measured parameters, such as water level, waves, wind and river discharge, numerical modelling of the morphodynamic processes can be tested. To replicate the morphological changes in the medium-term within a feasible simulation time, forcing conditions are reduced through the use of an input reduction method (called ensemble technique). In this study, simulations are based on the coupling between Telemac-2D and its non-cohesive sediment transport module, Sisyphe (version 5.3 for both modules). Three different sediment transport formulae were tested: (1) Engelund and Hansen (A monograph on sediment transport in alluvial streams, 3rd edn. Technological University of Denmark, Copenhagen, 1967) including the modifications proposed by Chollet and Cunge (J Hydraul Eng 17(1):1–13, 1979); (2) Bijker (Mechanics of sediment transport by the combination of waves and current. In: Design and reliability of coastal structures. 23rd international conference on Coastal Engineering, pp 147–173, 1968) and (3) Soulsby (Dynamics of Marine Sands. A manual for practical applications. HR Wallingford, Wallingford, p 142, 1997) modified version of van Rijn [J Hydraul Eng 110(10):1431–1456, 1984a, J Hydraul Eng 110(11):1613–1641, 1984b] formulation. Both a qualitative (i.e. visual comparison) and a quantitative tool [Brier Skill Score (BSS); described in Sutherland et al. in Coast Eng 51:917–939, 2004b] are applied to assess the similarity of simulations when compared to model predictions and observations. Tests confirmed the reliability and time efficiency of the ensemble technique, since it reproduced very well the results of a reference run, a computation based on the observed boundary conditions. For the spring-neap cycle modelled, the BSS was of 0.91 (a perfect modelling would have a BSS of 1), with a reduction in the simulation time on the order of 80%. For the 6-month-period simulation, results were also excellent: BSS=0.92 and a computer time reduction of 85%. In principle, this method has the advantage of being applied to any process-based numerical model.     

On the Dynamics of Dust Grains in a Hierarchical Environment

Most main sequence stars are binaries or higher multiplicity Systems and it appears that at birth most stars have circumstellar disks. It is commonly accepted that planetary systems arise from the material of these disks; consequently, binary and multiple systems may have a main role in planet formation. In this paper, we study the stage of planetary formation during which the particulate material is still dispersed as centimetre-to-metre sized primordial aggregates. We investigate the response of the particles, in a protoplanetary disk with radius R_D = 100 AU around a solar-like star, to the gravitational field of bound perturbing companions in a moderately wide (300–1600 AU) orbit. For this purpose, we have carried out a series of simulations of coplanar hierarchical configurations using a direct integration code that models gravitational and viscous forces. The massive protoplanetary disk is around one of the components of the binary. The evolution in time of the dust sub-disk depends mainly on the nature (prograde or retrograde) of the relative revolution of the stellar companion, and on the temperature and mass of the circumstellar disk. Our results show that for binary companions near the limit of tidal truncation of the disk, the perturbation leads to an enhanced accretion rate onto the primary, decreasing the lifetime of the particles in the protoplanetary disk with respect to the case of a single star. As a consequence of an enhanced accretion rate the mass of the disk decreases faster, which leads to a longer resultant lifetime for particles in the disk. On the other hand, binary companions may induce tidal arms in the dust phase of protoplanetary disks. Spiral perturbations with m = 1 may increase in a factor 10 or more the dust surface density in the neighbourhood of the arm, facilitating the growth of the particles. Moreover, in a massive disk (0.01M⊙) the survival time of particles is significantly shorter than in a less massive nebula (0.001M⊙) and the temperature of the disk severely influences the spiral-in time of particles. The rapid evolution of the dust component found in post T Tauri stars can be explained as a result of their binary nature. Binarity may also influence the evolution of circumpulsar disks. This revised version was published online in July 2006 with corrections to the Cover Date.     

Microbial biomass response to different quantities and sources of organic matter in Brazilian coastal sediments

This study investigates the benthic microbial responses to organic matter (OM) variations in quantity and sources in two shallow water bays (Fortaleza and Ubatuba Bays) on the SE coast of Brazil on six occasions during the year. The pelagic and benthic compartments of the bays were evaluated by: (i) nutrients and chlorophyll a (Chl a) in the water column; (ii) quantity and sources of OM in the sediment (Chl a, total organic carbon and total nitrogen and lipid biomarker composition); and (iii) microbial biomass in sediments as an indicator of active benthic response. Although there were changes in water‐column nutrients during the year, Chl a was fairly constant, suggesting a regular supply of microalgae‐derived OM to the sea bottom. Based on the composition of lipid biomarkers in sediments, OM sources were classified as mostly marine and with high contributions of labile (microalgae‐derived) OM. Labile OM composition varied from diatoms in the summer to phytoflagellates in the winter and tended to accumulate in areas protected by physical disturbances in one of the bays. Microbial biomass followed this trend and was 160% higher in protected than in exposed areas. This study suggests that the coupling between labile OM and benthic microbial biomass occurs primarily in protected areas, irrespective of the time of the year. Since meio‐ and macrofaunal assemblages depend upon secondary microbial production within the sediments, this coupling may have an important role for the benthic food‐web.     

Taxonomic sufficiency for soft-bottom sublittoral mollusks assemblages in a tropical estuary, Guanabara Bay, Southeast Brazil

Guanabara Bay (GB) is considered to be one of the most polluted environments of the southern Brazilian coastline. This typical estuarine system is impacted by the heavy discharge of both industrial and domestic waste from the Rio de Janeiro metropolitan area. The mollusc community structure and distribution was investigated between 2000 and 2001, using a three month sampling design of 38 stations, according to austral seasons. Species abundance was aggregated into progressively higher taxa matrices (genus, family, order) and were analysed using multivariate techniques. Mollusc distribution in GB varied significantly in space and time and was probably ruled by the organic enrichment effects of hypoxia and altered redox conditions coupled with prevailing patterns of circulation. Within the sectors of GB an increasing gradient in mollusc diversity and occurrence was observed, ranging from the azoic and impoverished stations in the inner sector to a well-structured community in terms of species composition and abundance inhabiting the outer sector. The non-metric multidimensional scaling (nMDS) and cluster analysis showed similar results when species were aggregated into genera and families, while greater difference occurred at coarser taxonomic identification (order). The literature about taxonomic sufficiency has demonstrated that faunal patterns at different taxonomic levels tend to become similar with increased pollution. In Guanabara Bay, an analysis carried out solely at family level is perfectly adequate to describe the ecophysiological stress. Further aggregation to order level changed the perceived patterns of differences. However, a different taxonomic resolution can be chosen depending on the type of ecological patterns investigated.     

Stramonita haemastoma as a bioindicator for organotin contamination in coastal environments

Stramonita haemastoma was investigated as a suitable bioindicator of TBT and TPhT contamination in the tropical Atlantic Ocean by: 1. Imposex induction in healthy females after inoculation with TBT and TPhT in the laboratory; and 2. Determining incidence of imposex in S. haemastoma collected from areas with various levels of tributyltin (TBT) and triphenyltin (TPhT) and determining the concentrations of these chemical in its tissues and that of its prey, the mussell Perna pernas. Imposex intensities and organotin concentrations in tissues showed good correlation, indicating S. haemastoma as a reliable bioindicator of TBT and TPhT contamination in coastal waters. Body burden threshold of TBT and TPhT for imposex induction was estimated to be 10-20 ng g(-1).     

Evaluating the fitness for use of spatial data sets to promote quality in ecological assessment and monitoring

This article proposes and illustrates a practical methodological framework to evaluate the fitness for use of spatial data sets for environmental and ecological applications, focusing on user requirements for specified application contexts. The methodology is based on the use of metadata to analyze similarity between the data characteristics and the user’s needs or expectations for several quality indicators. Additionally, the concept of ‘critical factors’ is introduced in this framework, allowing users to define which quality indicators have greater importance given their own requirements or expectations and the specified application contexts. The proposed methodology further allows integrating and interconnecting the spatial data quality (SDQ) evaluation methodology with metadata geoportals in WebGIS platforms, facilitating its operation by users from non-spatial disciplines and with often limited expertise on this subject. Examples of the evaluation of fitness for use for specific application contexts within the project BIO_SOS (‘Biodiversity Multi-SOurce Monitoring System: From Space To Species’ FP7 project) are presented. By providing a prompt and straightforward evaluation tool, the proposed methodology can encourage the implementation of SDQ evaluation routines in ecological assessment and monitoring programs, promoting a more adequate use of geospatial data and ultimately contributing to well-supported policy and management decisions.     

Land use dynamics in Brazilian La Plata Basin and anthropogenic climate change

The La Plata Basin (LPB) is one of the most important regions for agriculture and livestock production in South America, playing a central role in the world food production and food security. Within its borders is also located the whole Brazilian Pantanal region. Identifying the most important land use sectors in LPB as well as the changes observed in the past years is fundamental to recognize which areas of the basin might be more vulnerable to climate change in order to design adaptation strategies. A general characterization of land use and livestock production of Brazilian LPB was done by using the System of Automatic Retrieving (SIDRA) of Brazilian Institute of Geography and Statistics (IBGE) platform as the major source of data. It was observed expressive increases in land areas used for temporary crops, such as soybean, sugarcane, and maize, as well as increases in poultry and swine production. These important changes in agricultural land use and livestock production are currently associated to non-climatic drivers, but this dynamic might be strongly affected by the consequences of climate change and variability, with negative socio-economic impacts for the whole region.