PCBs in Central Vietnam coastal lagoons: levels and trends in dynamic environments

PCBs were analysed in surficial sediments and selected sediment cores collected between 2002 and 2008 in Central Vietnam coastal lagoons. The aim was to determine contamination levels and trends, and to evaluate the effects of anthropogenic pressures and natural events. Samples were mostly fine-grained with low total PCB concentrations (0.367-44.7 μg kg⁻¹). Atmospheric transport and post depositional processes modify to some degree the fingerprint of PCB inputs to the environment favouring the predominance of 3, 4 and 5 chlorinated congeners. The similarity of congener distributions in contemporary surficial samples also suggests the presence of a unique source over the entire study area, probably connected to mobilisation and long range transports from land-based stocks. The removal of consistent sediment layers is hypothesised based on repeated samplings of the same area. Natural meteorological events (such as typhoons) are suspected to be responsible for these sediment losses.     

Multiplatform observation of the surface circulation in the Gulf of Naples (Southern Tyrrhenian Sea)

The Gulf of Naples (Southern Tyrrhenian Sea) is a highly urbanised area, where human activities and natural factors (e.g. river runoff, exchanges with adjacent basins) can strongly affect the water quality. In this work we show how surface transport can influence the distribution of passively drifting surface matter, and more in general if and how the circulation in the basin can promote the renovation of the surface layer. To this aim, we carried out a multiplatform analysis by putting together HF radar current fields, satellite images and modelling tools. Surface current fields and satellite images of turbidity patterns were used to initialise and run model simulations of particle transport and diffusion. Model results were then examined in relation to the corresponding satellite distributions. This integrated approach permits to investigate the concurrent effects of surface dynamics and wind forcing in determining the distribution of passive tracers over the basin of interest, identifying key mechanisms supporting or preventing the renewal of surface waters as well as possible areas of aggregation and retention.     

Investigation of Small‐Scale Preferential Flow with a Forced‐Gradient Tracer Test

A new tracer experiment (referred to as MADE‐5) was conducted at the well‐known Macrodispersion Experiment (MADE) site to investigate the influence of small‐scale mass‐transfer and dispersion processes on well‐to‐well transport. The test was performed under dipole forced‐gradient flow conditions and concentrations were monitored in an extraction well and in two multilevel sampler (MLS) wells located at 6, 1.5, and 3.75 m from the source, respectively. The shape of the breakthrough curve (BTC) measured at the extraction well is strongly asymmetric showing a rapidly arriving peak and an extensive late‐time tail. The BTCs measured at seven different depths in the two MLSs are radically different from one another in terms of shape, arrival times, and magnitude of the concentration peaks. All of these characteristics indicate the presence of a complex network of preferential flow pathways controlling solute transport at the test site. Field‐experimental data were also used to evaluate two transport models: a stochastic advection‐dispersion model (ADM) based on conditional multivariate Gaussian realizations of the hydraulic conductivity field and a dual‐domain single‐rate (DDSR) mass‐transfer model based on a deterministic reconstruction of the aquifer heterogeneity. Unlike the stochastic ADM realizations, the DDSR accurately predicted the magnitude of the concentration peak and its arrival time (within a 1.5% error). For the multilevel BTCs between the injection and extraction wells, neither model reproduced the observed values, indicating that a high‐resolution characterization of the aquifer heterogeneity at the subdecimeter scale would be needed to fully capture 3D transport details.     

Lessons Learned from 25 Years of Research at the MADE Site

Field studies at well‐instrumented research sites have provided extensive data sets and important insights essential for development and testing of transport theories and mathematical models. This paper provides an overview of over 25 years of research and lessons learned at one of such field research sites on the Columbus Air Force Base in Mississippi, commonly known as the Macrodispersion Experiment (MADE) site. Since the mid‐1980s, field data from the MADE site have been used extensively by researchers around the world to explore complex contaminant transport phenomena in highly heterogeneous porous media. Results from field investigations and modeling analyses suggested that connected networks of small‐scale preferential flow paths and relative flow barriers exert dominant control on solute transport processes. The classical advection‐dispersion model was shown to inadequately represent plume‐scale transport, while the dual‐domain mass transfer model was found to reproduce the primary observed plume characteristics. The MADE site has served as a valuable natural observatory for contaminant transport studies where new observations have led to better understanding and improved models have sprung out analysis of new data.     

Fault architecture in the Main Ethiopian Rift and comparison with experimental models: Implications for rift evolution and Nubia–Somalia kinematics

The Main Ethiopian Rift (MER) offers a complete record of the time–space evolution of a continental rift. We have characterized the brittle deformation in different rift sectors through the statistical analysis of a new database of faults obtained from the integration between satellite images and digital elevation models, and implemented with field controls. This analysis has been compared with the results of lithospheric-scale analogue models reproducing the kinematical conditions of orthogonal and oblique rifting. Integration of these approaches suggests substantial differences in fault architecture in the different rift sectors that in turn reflect an along-axis variation of the rift development and southward decrease in rift evolution. The northernmost MER sector is in a mature stage of incipient continental rupture, with deformation localised within the rift floor along discrete tectono-magmatic segments and almost inactive boundary faults. The central MER sector records a transitional stage in which migration of deformation from boundary faults to faults internal to the rift valley is in an incipient phase. The southernmost MER sector is instead in an early continental stage, with the largest part of deformation being accommodated by boundary faults and almost absent internal faults. The MER thus records along its axis the typical evolution of continental rifting, from fault-dominated rift morphology in the early stages of extension toward magma-dominated extension during break-up. The extrapolation of modelling results suggests that a variable rift obliquity contributes to the observed along-axis variations in rift architecture and evolutionary stage, being oblique rifting conditions controlling the MER evolution since its birth in the Late Miocene in relation to a constant post ca. 11 Ma ~ N100°E Nubia–Somalia motion.     

Behavior of epidote at high pressure and high temperature: a powder diffraction study up to 10 GPa and 1,200 K

The thermo-elastic behavior of a natural epidote [Ca_1.925 Fe_0.745Al_2.265Ti_0.004Si_3.037O₁₂(OH)] has been investigated up to 1,200 K (at 0.0001 GPa) and 10 GPa (at 298 K) by means of in situ synchrotron powder diffraction. No phase transition has been observed within the temperature and pressure range investigated. P–V data fitted with a third-order Birch–Murnaghan equation of state (BM-EoS) give V ₀ = 458.8(1)ų, K _T0 = 111(3) GPa, and K′ = 7.6(7). The confidence ellipse from the variance–covariance matrix of K _T0 and K′ from the least-square procedure is strongly elongated with negative slope. The evolution of the “Eulerian finite strain” vs “normalized stress” yields Fe(0) = 114(1) GPa as intercept values, and the slope of the regression line gives K′ = 7.0(4). The evolution of the lattice parameters with pressure is slightly anisotropic. The elastic parameters calculated with a linearized BM-EoS are: a ₀ = 8.8877(7) Å, K _T0(a) = 117(2) GPa, and K′(a) = 3.7(4) for the a-axis; b ₀ = 5.6271(7) Å, K _T0(b) = 126(3) GPa, and K′(b) = 12(1) for the b-axis; and c ₀ = 10.1527(7) Å, K _T0(c) = 90(1) GPa, and K’(c) = 8.1(4) for the c-axis [K _T0(a):K _T0(b):K _T0(c) = 1.30:1.40:1]. The β angle decreases with pressure, β_P(°) = β_P0 −0.0286(9)P +0.00134(9)P ² (P in GPa). The evolution of axial and volume thermal expansion coefficient, α, with T was described by the polynomial function: α(T) = α₀ + α₁ T ^−1/2. The refined parameters for epidote are: α₀ = 5.1(2) × 10⁻⁵ K⁻¹ and α₁ = −5.1(6) × 10⁻⁴ K^1/2 for the unit-cell volume, α₀(a) = 1.21(7) × 10⁻⁵ K⁻¹ and α₁(a) = −1.2(2) × 10⁻⁴ K^1/2 for the a-axis, α₀(b) = 1.88(7) × 10⁻⁵ K⁻¹ and α₁(b) = −1.7(2) × 10⁻⁴ K^1/2 for the b-axis, and α₀(c) = 2.14(9) × 10⁻⁵ K⁻¹ and α₁(c) = −2.0(2) × 10⁻⁴ K^1/2 for the c-axis. The thermo-elastic anisotropy can be described, at a first approximation, by α₀(a): α₀(b): α₀(c) = 1 : 1.55 : 1.77. The β angle increases continuously with T, with β_T(°) = β_T0 + 2.5(1) × 10⁻⁴ T + 1.3(7) × 10⁻⁸ T ². A comparison between the thermo-elastic parameters of epidote and clinozoisite is carried out.     

Sinkhole characterization in the Dead Sea area using airborne laser scanning

Since the early 1980s, the Dead Sea coast has undergone a near catastrophic land deterioration as a result of a rapid lake-level drop. One conspicuous expression of this deterioration is the formation of sinkholes fields that puncture the coastal plains. The evolution of sinkholes along nearly 70-km strip has brought to a halt the regional development in this well-known and toured area and destroyed existing infrastructures. Great efforts are being invested in understanding the phenomena and in development of monitoring techniques. We report in this paper the application of airborne laser scanning for characterization of sinkholes. We demonstrate first the appropriateness of laser scanning for this task and its ability to provide detailed 3D information on this phenomenon. We describe then an autonomous means for their extraction over large regions and with high level of accuracy. Extraction is followed by their detailed geometric characterization. Using this high-resolution data, we show how sinkholes of 0.5 m radius and 25 cm depth can be detected from airborne platforms as well as the geomorphic features surrounding them. These sinkhole measures account for their embryonic stage, allowing tracking them at an early phase of their creation.     

Source-specific variability in post-depositional DNA preservation with potential implications for DNA based paleoecological records

Recent studies have shown that genotyping preserved plankton DNA in marine and lacustrine sediment records using ancient DNA methods is a promising approach for refining paleoenvironmental information. However, the extent to which the preservation of fossil plankton DNA differs between species is poorly understood. Using a continuous 2700 year sediment record from Watts Basin in Ellis Fjord (Antarctica), we compared the level of preservation of fossil DNA derived from important plankton members with varying cellular architecture. The amount of preserved small subunit ribosomal DNA (SSU rDNA; ca. 500 base pair fragments) of dinoflagellates (as extracellular DNA rather than as preserved cysts) that could be amplified by way of PCR declined up to five orders of magnitude with increasing sediment depth and age. In contrast, the amount of similar-sized, PCR-amplifiable, diatom SSU rDNA (predominantly from a cyst-forming Chaetoceros sp.) declined only up to tenfold over 2700 years of deposition. No obvious decline in copy numbers with increasing sediment age was observed for similar-sized SSU rDNA of past chemocline-associated photosynthetic green sulfur bacteria (GSB), which do not have a protective resting stage. In good agreement with the quantitative data, the extent of post-depositional natural degradation to fragments too small to serve as a template for the quantitative PCR assays was greatest for dinoflagellates and lowest for GSB. An increase in the ratio between GSB-derived DNA and intact carotenoids with sediment depth implies that short GSB DNA fragments were better preserved than intact carotenoids and provide a more accurate view into paleoproductivity and the sediment flux of GSB in Watts Basin. We discuss the possible causes behind the variation in the level of DNA preservation among the plankton groups investigated, as well as consequences for the use of using fossil DNA records in paleoecology studies.     

Latitudinal variation in the aerial/aquatic ratio of oxygen consumption of a supratidal high rocky‐shore crab

The colonisation of the terrestrial environment by crustaceans is more apparent in tropical latitudes because of the high diversity of semi‐terrestrial and terrestrial crabs. However, in temperate regions there are also great numbers of crustaceans that inhabit ecological niches at the water–air interface. Grapsidae crabs (Decopoda) are especially important in studies of water‐to‐land transition as the family contains species occupying the intertidal and adjacent regions. A way to evaluate the ability of intertidal invertebrates to breathe air is to measure the aerial/aquatic oxygen consumption ratio. The objective of this study was to test the effect of thermal variation on the aquatic and aerial metabolism. We selected as study model the decopoda crab Cyclograpsus cinereus Dana and utilised five populations of the species spread over 2000 km along the Chilean coast. To determine the compensation capacity in respiration with respect to latitude, we evaluated metabolic rate at the same temperature in a common garden design in the laboratory, to examine the extent to which variation in crab physiology is environmentally determined. Whereas in our study, m_b (body mass) varied significantly with latitude, the difference in mass‐independent metabolism both in air and water persisted, indicating that observed differences in MR (Metabolic Rate) were not an effect of differences in body size. We demonstrated that C. cinereus is able to breath oxygen from air and water as expected for an amphibious crab. Almost all the studied populations of C. cinereus show a aerial/aquatic metabolism ratio near 1. The pattern found indicates an increase in metabolic rate, both aerial and aquatic, in low latitudes and therefore does not support the latitudinal compensation hypothesis for temperate habitats. Finally, these kinds of studies are required to make the necessary link between ecological physiology and macroecology and to help develop a global understanding of organismal function in marine systems.