Clastic dikes in the Dead Sea basin as indicators of local site amplification

Natural Hazards - Early Holocene seismic activity triggered fluidization and clastic-dike emplacement within Late Pleistocene lacustrine Lisan Formation sediments in the Dead Sea basin (DSB)....     

PM2.5 co-benefits of climate change legislation part 2: California governor’s executive order S-3-05 applied to the transportation sector

California Governor’s Executive Order (CGEO) S-3-05 requires that California greenhouse gas (GHG) emissions be reduced to 80 % below 1990 levels by the year 2050. Meeting this target will require drastic changes in transportation technology, fuel, and behavior which will reduce criteria pollutant emissions as well as GHG emissions. The improvement to local air quality caused by the reduced criteria pollutant emissions must be calculated to fully evaluate the overall benefits and costs of CGEO S-3-05. In the present study, seven different transportation scenarios that move towards the goals of CGEO S-3-05 in the transportation sector were examined to determine how they would affect future airborne particulate matter (PM_2.5) concentrations in California: (1) hydrogen fuel cells, (2) electric vehicles, (3) high efficiency vehicles, (4) public mass transit, (5) biofuels, (6) biofuels + hybrid electric vehicles, and (7) hydrogen fuel cells + electric vehicles. The air quality implications of each scenario were evaluated using a chemical transport model applied during a wintertime stagnation episode representing future climate in California. Scenarios (6) and (7) reduced population-weighted PM_2.5 mass concentrations by ~9 % and PM_2.5 elemental carbon (EC) concentrations by ~30 % relative to base-case predictions.     

The respective roles of surface temperature driven feedbacks and tropospheric adjustment to CO2 in CMIP5 transient climate simulations

An overview of radiative climate feedbacks and ocean heat uptake efficiency diagnosed from idealized transient climate change experiments of 14 CMIP5 models is presented. Feedbacks explain about two times more variance in transient climate response across the models than ocean heat uptake efficiency. Cloud feedbacks can clearly be identified as the main source of inter-model spread. Models with strong longwave feedbacks in the tropics feature substantial increases in cloud ice around the tropopause suggestive of changes in cloud-top heights. The lifting of the tropical tropopause goes together with a general weakening of the tropical circulation. Distinctive inter-model differences in cloud shortwave feedbacks occur in the subtropics including the equatorward flanks of the storm-tracks. Related cloud fraction changes are not confined to low clouds but comprise middle level clouds as well. A reduction in relative humidity through the lower and mid troposphere can be identified as being the main associated large-scale feature. Experiments with prescribed sea surface temperatures are analyzed in order to investigate whether the diagnosed feedbacks from the transient climate simulations contain a tropospheric adjustment component that is not conveyed through the surface temperature response. The strengths of the climate feedbacks computed from atmosphere-only experiments with prescribed increases in sea surface temperatures, but fixed CO₂ concentrations, are close to the ones derived from the transient experiment. Only the cloud shortwave feedback exhibits discernible differences which, however, can not unequivocally be attributed to tropospheric adjustment to CO₂. Although for some models a tropospheric adjustment component is present in the global mean shortwave cloud feedback, an analysis of spatial patterns does not lend support to the view that cloud feedbacks are dominated by their tropospheric adjustment part. Nevertheless, there is positive correlation between the strength of tropospheric adjustment processes and cloud feedbacks across different climate models.     

An ESA NEOCC Effort to Eliminate High Palermo Scale Virtual Impactors

In this work we summarize the initial results of a targeted effort of the ESA NEO Coordination Centre to obtain additional observational data in order to eliminate or reduce the impact probability estimate of a subset of the known near-Earth objects representing the highest fraction of the total known impact risk, as measured by the Palermo Scale.     

Apparent Solar Tornado-Like Prominences

Recent high-resolution observations from the Solar Dynamics Observatory (SDO) have reawakened interest in the old and fascinating phenomenon of solar tornado-like prominences. This class of prominences was first introduced by Pettit (Astrophys. J. 76, 9, 1932), who studied them over many years. Observations of tornado prominences similar to the ones seen by SDO had already been documented by Secchi (Le Soleil, 1877). High-resolution and high-cadence multiwavelength data obtained by SDO reveal that the tornado-like appearance of these prominences is mainly an illusion due to projection effects. We discuss two different cases where prominences on the limb might appear to have a tornado-like behavior. One case of apparent vortical motions in prominence spines and barbs arises from the (mostly) 2D counterstreaming plasma motion along the prominence spine and barbs together with oscillations along individual threads. The other case of apparent rotational motion is observed in a prominence cavity and results from the 3D plasma motion along the writhed magnetic fields inside and along the prominence cavity as seen projected on the limb. Thus, the “tornado” impression results either from counterstreaming and oscillations or from the projection on the plane of the sky of plasma motion along magnetic-field lines, rather than from a true vortical motion around an (apparent) vertical or horizontal axis. We discuss the link between tornado-like prominences, filament barbs, and photospheric vortices at their base.     

Nonlinear Dynamic Response of HDRB and Hybrid HDRB-Friction Sliders Base Isolation Systems

The isolation systems are usually made of rubber bearings that are sometimes coupled in hybrid combination with frictional devices; this is the case of an in-site experimental campaign, performed on a base isolated apartment building in Rapolla (south of Italy). Several dropout tests at initial displacements up to 17cm allowed to obtain in-site information on the true dynamic response of the isolation system (building and isolators). The tests carried out allow a comparison between the free vibration responses of a building, isolated by using a 28 HDRB isolation system only, or an HDRB-Friction Sliders Hybrid one. The paper highlights the main differences of the response in the superstructure (the structure over the isolation system) obtained by using only HDRB isolation system, or the Hybrid one (HDRB and Friction Sliders in parallel system). Analysis and comparisons of experimental data, show the influence of nonlinearities on structural higher modes amplification, especially observed by using the higher nonlinear Hybrid isolation system. Tests results confirm that, in the case of a regular superstructure, like the Rapolla building, the isolation system nonlinearities influence the structural response.     

Investigation of Small‐Scale Preferential Flow with a Forced‐Gradient Tracer Test

A new tracer experiment (referred to as MADE‐5) was conducted at the well‐known Macrodispersion Experiment (MADE) site to investigate the influence of small‐scale mass‐transfer and dispersion processes on well‐to‐well transport. The test was performed under dipole forced‐gradient flow conditions and concentrations were monitored in an extraction well and in two multilevel sampler (MLS) wells located at 6, 1.5, and 3.75 m from the source, respectively. The shape of the breakthrough curve (BTC) measured at the extraction well is strongly asymmetric showing a rapidly arriving peak and an extensive late‐time tail. The BTCs measured at seven different depths in the two MLSs are radically different from one another in terms of shape, arrival times, and magnitude of the concentration peaks. All of these characteristics indicate the presence of a complex network of preferential flow pathways controlling solute transport at the test site. Field‐experimental data were also used to evaluate two transport models: a stochastic advection‐dispersion model (ADM) based on conditional multivariate Gaussian realizations of the hydraulic conductivity field and a dual‐domain single‐rate (DDSR) mass‐transfer model based on a deterministic reconstruction of the aquifer heterogeneity. Unlike the stochastic ADM realizations, the DDSR accurately predicted the magnitude of the concentration peak and its arrival time (within a 1.5% error). For the multilevel BTCs between the injection and extraction wells, neither model reproduced the observed values, indicating that a high‐resolution characterization of the aquifer heterogeneity at the subdecimeter scale would be needed to fully capture 3D transport details.     

Fundamental physics and absolute positioning metrology with the MAGIA lunar orbiter

MAGIA is a mission approved by the Italian Space Agency (ASI) for Phase A study. Using a single large-diameter laser retroreflector, a large laser retroreflector array and an atomic clock onboard MAGIA we propose to perform several fundamental physics and absolute positioning metrology experiments: VESPUCCI, an improved test of the gravitational redshift in the Earth?CMoon system predicted by General Relativity; MoonLIGHT-P, a precursor test of a second generation Lunar Laser Ranging (LLR) payload for precision gravity and lunar science measurements under development for NASA, ASI and robotic missions of the proposed International Lunar Network (ILN); Selenocenter (the center of mass of the Moon), the determination of the position of the Moon center of mass with respect to the International Terrestrial Reference Frame/System (ITRF/ITRS); this will be compared to the one from Apollo and Lunokhod retroreflectors on the surface; MapRef, the absolute referencing of MAGIA??s lunar altimetry, gravity and geochemical maps with respect to the ITRF/ITRS. The absolute positioning of MAGIA will be achieved thanks to: (1) the laboratory characterization of the retroreflector performance at INFN-LNF; (2) the precision tracking by the International Laser Ranging Service (ILRS), which gives two fundamental contributions to the ITRF/ITRS, i.e. the metrological definition of the geocenter (the Earth center of mass) and of the scale of length; (3) the radio science and accelerometer payloads; (4) support by the ASI Space Geodesy Center in Matera, Italy. Future ILN geodetic nodes equipped with MoonLIGHT and the Apollo/Lunokhod retroreflectors will become the first realization of the International Moon Reference Frame (IMRF), the lunar analog of the ITRF.     

Analysis, synthesis and modelling of high-resolution observations of salt-marsh eco-geomorphological patterns in the Venice lagoon

The present paper describes observations, analyses and models of salt-marsh channel network and vegetation patterns with the aim of contributing to the development of predictive models of ecological and morphological co-evolution. Existing and new observations are described, with particular emphasis on remote sensing and ancillary field surveys, which are shown to allow reliable, accurate and repeatable quantitative characterizations of landform and vegetation properties over the spatial scales of interest. The observed channel network morphological characters are then used as the basis and validation of models describing the emergence of channel network and vegetation spatial patterns. In particular, with reference to observations performed in the Venice Lagoon, the note describes: (i) new, 2-cm resolution, characterizations of channel network geometry obtained from “proximal sensing” photographic observations; (ii) the reliable quantitative maps of salt-marsh vegetation which may be retrieved from hyperspectral remote sensing data and field ancillary observations; (iii) a synthesis of recent and new analyses of the statistical properties of vegetation and landform spatial organization, that may be inferred from the maps so derived; (iv) recent and new conceptual and quantitative ecological and geomorphic models developed and validated by remote-sensing and field observations. A coherent observational and theoretical eco-morphodynamic framework is then proposed.     

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.