The Messinian Sicilian stratigraphy revisited: new insights for the Messinian salinity crisis

Controversies around the Messinian salinity crisis (MSC) are because of the difficulties in establishing genetic and stratigraphic relationships between its deep and shallow‐water record. Actually, the Sicilian foreland basin shows both shallow and deep‐water Messinian records, thus offering the chance to reconstruct comprehensive MSC scenarios. The Lower Gypsum of Sicily comprises primary and resedimented evaporites separated in space and time by the intra‐Messinian unconformity. A composite unit including halite, resedimented gypsum and Calcare di Base accumulated between 5.6 and 5.55 Ma in the main depocentres; it records the acme of the Messinian Salinity Crisis during a tectonic phase coupled with sea‐level falls at glacials TG14‐TG12. These deposits fully post‐date primary gypsum, which precipitated in shallow‐water wedge‐top and foreland ramp basins between 5.96 and 5.6 Ma. This new stratigraphic framework results in a three‐stage MSC scenario characterized by different primary evaporite associations: selenite in the first and third stages, carbonate, halite and potash salt in the second one associated with hybrid resedimented evaporites.     

Validation through HVSR measurements of a method for the quick detection of site amplification effects from intensity data: an application to a seismic area in Northern Italy

An instrumental validation is attempted of an innovative approach devoted to the quick individuation, from macroseismic data, of site amplification phenomena able to significantly modify seismic hazard levels expected on the basis of average propagation effects only. According to this methodology, two evaluations of hazard are performed at each investigated locality: the former, obtained by epicentral intensity data ‘reduced’ at the site through a probabilistic attenuation function and, the latter, computed by integrating such data with seismic effects actually observed at the site during past earthquakes. The comparison, for each locality, between these two hazard estimates allow to orientate the identification of those sites where local amplifications of earthquake ground motion could be significant. In order to check such methodology, indications obtained in this way from macroseismic data are compared with the estimates of transfer functions performed through the HVSR technique applied to microtremors. Results concerning municipalities located in a seismic area of Northern Italy indicate a good agreement between macroseismic and instrumental estimates.     

Calibration of a chalcogenide glass membrane ion-selective electrode for the determination of free Fe in seawater: I. Measurements in UV photooxidised seawater

Calibration of a chalcogenide glass membrane, Fe(III)ISE [Fe_2.5(Ge₂₈Sb₁₂Se₆₀)_97.5], in buffered saline media has been undertaken in order to assess the suitability of this ISE for seawater analyses. The electrode slopes in saline citrate and salicylate buffers were 26.3 and 28.2 mV/decade, respectively, for Fe³⁺ concentrations ranging from 10⁻¹⁰ M to less than 10⁻²⁵ M Fe³⁺. The calibration lines in the citrate and salicylate buffers were essentially collinear with the response in unbuffered chloride-free standards containing >10⁻⁵ M Fe³⁺, demonstrating that the response of the FeISE is unaffected by chloride ions. A mechanism involving a combination of charge transfer and ion-exchange of Fe(III), at the electrode diffusion layer, can be used to explain the ≈30 mV/decade slope of the FeISE. The response of the FeISE in UV photooxidised seawater containing 8 nM total Fe was measured as the pH was changed from 8.27 to 3.51. The slope of the response was 24.2 mV/decade [Fe³⁺] calculated as a function of pH using Fe(III) hydrolysis constants for seawater. Moreover, the response was essentially collinear with that in citrate buffers and in unbuffered solutions containing >10⁻⁵ M Fe³⁺ and the slope for the combined data was 26.2 mV/decade. This study was restricted to organic-free seawater because the certainty in Fe(III)–ligand stability constants is insufficient to warrant the selection of an ideal calibration buffer system, and there is evidence that powerful chelating ligands (e.g., EDTA along with humic and fulvic acids) may alter the response of the Fe(III)ISE. The Fe dissolution rate of the FeISE in UV photooxidised seawater was found to be 1.6×10⁻² nmol Fe/min, as measured by cathodic stripping voltammetry (CSV). This would contaminate a 100-ml sample by 0.8–1.6 nM Fe over a typical measurement period of 5–10 min obtained using a stability criterion of 0.5 mV/min. Various methods are proposed for reducing the level of contamination in open ocean samples that contain sub-nanomolar concentrations of iron. The FeISE has the potential to detect free Fe³⁺ at concentrations typically found in natural seawater.     

Input of atmospheric lead to marine sediments in a south-east Pacific coastal area (approximately 36 degrees S)

Atmospheric input of Pb to coastal sediments in the south-east Pacific (approximately 36 degrees S) was estimated using: (1) a salt marsh (non-local emission sources) as a natural collector of atmospheric fluxes and (2) Pb concentrations in rain and air samples, both considered to be representative of the atmospheric input in the study area. A radioisotopic geochronology technique ((210)Pb) was used to estimate the total Pb atmospheric supply to the sediments. The results show that atmospheric input to Concepción Bay accounts for 13-68% of Pb in near shore sediments, evaluated through salt marsh and rain, both showing comparable results. Consequently, there are other relevant Pb sources to explain the higher concentrations in this area. Sediments in the shelf are subject to important influence of upwelling waters, estimated by Salamanca [Sources and sinks of (210)Pb in Concepción Bay, Chile (1993) PhD thesis, Marine Science Research Center, State University of New York at Stony Brook, USA] using (210)Pb. The atmospheric input, however, is mainly responsible for the total Pb input, since the salt marsh (natural atmospheric collector) shows similar Pb(xs) inventories than the shelf, corresponding to a regional-scale Pb emissions.     

Three-dimensional visualization of mission planning and control forthe NPS autonomous underwater vehicle

The Naval Postgraduate School (NPS) is constructing a small autonomous underwater vehicle (AUV) with an onboard mission control computer. The mission controller software for this vehicle is a knowledge-based artificial intelligence (AI) system requiring thorough analysis and testing before the AUV is operational. The manner in which rapid prototyping of this software has been demonstrated by developing a controller code on a LISP machine and using an Ethernet link with a graphics workstation to simulate the controller's environment is discussed. The development of a testing simulator using a knowledge engineering environment (KEE) expert system shell that examines AUV controller subsystems and vehicle models before integrating them with the full AUV for its test environment missions is discussed. This AUV simulator utilizes an interactive mission planning control console and is fully autonomous once initial parameters are selected     

Bioaccumulation of heavy metals by bivalves from Limski Kanal (North Adriatic Sea). II. Copper distribution between oysters, Ostrea edulis, and ambient water

Accumulation of copper was studied between June 1979 and June 1980 in the oyster Ostrea edulis Linnaeus, cultivated in the Limski Kanal, on the Istria Peninsula (Yugoslavia).The copper distribution in different organs of oysters of the same age was compared with concentrations of copper existing in different physicochemical forms in ambient sea water, i.e., dissolved Cu in labile complexes determined at the natural pH of 8; ‘total’ dissolved Cu determined after acidification to pH 2; and Cu bound to suspended particles with a diameter above 0.45 μm. Copper concentrations in the water were determined by differential pulse anodic stripping voltammetry (DPASV) and in analyses of biotic material, graphite furnace atomic absorption spectrometry (GFAAS) was applied.Significant correlations have been found between copper complexed with dissolved organic ligands and its concentration in the soft part of the oyster. Copper contents increase gradually with the weight of the organs until enhanced gametogenetic activity of the oysters occurs. Thereafter the correlation factor between copper contents and the size of body parts varied significantly with the season.     

Trace metals in selected organisms from the Adriatic sea

Extensive surveys were made to establish the concentrations of several metals (Zn, Cd, Pb, Cu and Hg) in various marine organisms from different parts of the Adriatic Sea in the period from 1979 to 1985. The results obtained are based on analyses which were performed in conjunction with carefully tested procedures. Proper sampling, sample storage, treatment of samples and final analytical determination has excluded artefacts which would influence the accuracy, or cause contamination and/or trace metal losses.The metal concentrations in shellfish from the coastal areas of the Adriatic Sea are in the range of the lowest values obtained for similar organisms from other localities throughout the Mediterranean Sea. Special attention has been paid to the anthropogenic influence on trace metal concentrations in organisms living in the vicinity of domestic sewage and/or industrial waste-water outflows.     

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.     

Seep mounds on the Southern Vøring Plateau (offshore Norway)

Multidisciplinary study of seep-related structures on Southern Vøring Plateau has been performed during several UNESCO/IOC TTR cruises on R/V Professor Logachev. High-resolution sidescan sonar and subbottom profiler data suggest that most of the studied fluid discharge structures have a positive relief at their central part surrounded by depression. Our data shows that the present day fluid activity is concentrated on the top of these “seep mounds”. Number of high hydrocarbon (HC) gas saturated sediment cores and 5 cores with gas hydrate presence have been recovered from these structures. δ¹³C of methane (between −68 and −94.6‰ VPDB) and dry composition of the gas points to its biogenic origin. The sulfate depletion generally occurs within the upper 30–200 cm bsf and usually coincides with an increase of methane concentration. Pore water δ¹⁸O ranges from 0.29 to 1.14‰ showing an overall gradual increase from bottom water values (δ¹⁸O ∼ 0.35‰). Although no obvious evidence of fluid seepage was observed during the TV surveys, coring data revealed a broad distribution of living Pogonophora and bacterial colonies on sea bottom inside seep structures. These evidences point to ongoing fluid activity (continuous seepage of methane) through these structures. From other side, considerable number and variety of chemosynthetic macro fauna with complete absence of living species suggest that present day level of fluid activity is significantly lower than it was in past. Dead and subfossil fauna recovered from various seep sites consist of solemyid (Acharax sp.), thyasirid and vesicomyid (cf. Calyptogena sp.) bivalves belonging to chemosymbiotic families. Significant variations in δ¹³C (−31.6‰ to −59.2‰) and δ¹⁸O (0.42‰ and 6.4‰) of methane-derived carbonates collected from these structures most probably related to changes in gas composition and bottom water temperature between periods of their precipitation. This led us to ideas that: (1) seep activity on the Southern Vøring Plateau was started with large input of the deep thermogenic gas and gradually decries in time with increasing of biogenic constituent; (2) authigenic carbonate precipitation started at the near normal deep sea environments with bottom water temperature around +5 °C and continues with gradual cooling up to negative temperatures recording at present time.     

Mg-metasomatism of oceanic gabbros and its control on Ti-clinohumite formation during eclogitization

In the high-pressure meta-ophiolites of Western Liguria (Italy), serpentinized ultramafites host bodies of eclogite, metarodingite and Ti-clinohumite ± Ti-chondrodite-bearing rocks. The latter contain relics of augite, ilmenite and apatite, which suggest derivation from pristine Fe-Ti-rich gabbros. The composition of relict mantle clinopyroxene in the host serpentinites indicates primary depleted peridotite compositions. Compared with their inferred protoliths, the Ti-clinohumite dikelets and the host serpentinites display significant changes in their major and trace element concentrations, indicating element exchange between the two rock systems. In particular, the Fe-Ti-rich gabbros were depleted in CaO and FeO and were strongly enriched in MgO. Analogous compositional variations are shown by altered gabbros enclosed in serpentinized peridotites from the obducted ophiolite sequences of the Northern Apennine. This evidence suggests that the observed Mg-enrichment recorded by the Ti-clinohumite metagabbros occurred in oceanic environments as the result of diffusive exchange between ultramafites and gabbros in presence of fluids related to serpentinization of the ultramafic country rocks. Alteration of the gabbro and concomitant Mg-uptake mostly caused extensive chloritization of the igneous plagioclase. Survival of igneous ilmenite and augite and their reaction with the hydrothermal chlorite during high-pressure metamorphism produced the observed Ti-clinohumite and Ti-chondrodite assemblages. The data presented thus indicate that crystallization of Ti-clinohumite assemblages was facilitated by a stage of oceanic alteration leading to Mg-enrichment of original Fe-Ti-rich gabbros. We suggest that during alteration, Mg-metasomatism occurred prior to rodingitization and was related to the earlier stages of peridotite serpentinization. Survival of oceanic chemical heterogeneities in the Ti-clinohumite rocks, indicates that element mobility during high-pressure recrystallization of these rocks was on a limited scale. This allowed preservation of their pre-subduction alteration features. Received: 13 July 1998 / Accepted: 3 November 1998