Effects of rainy season on mobilization of contaminants from tsunami deposits left in a coastal zone of Thailand by the 26 December 2004 tsunami

Study on contamination of tsunami sediments deposited on 26 December 2004 conducted shortly after the tsunami in coastal zone of Thailand revealed elevated contents of salts in water-soluble and some heavy metals and arsenic in bioavailable fractions (Szczuciński et al. in Env Geol 49:321–331, 2005). Few months later rainy season started and effected in total rainfall of over 3,300 mm. This paper presents results of survey repeated 1 year after the tsunami. To assess the effects of rainy season on mobilization of previously determined potential contaminants, the same locations were sampled again and analysed with the same methods. The tsunami deposit layer was well preserved but in many locations the sediments were coarser than just after tsunami due to washing out of finer fractions. The water-soluble salts contents were strongly reduced after the rainy season. However, the concentrations of acid leachable heavy metals and metalloids were still elevated in comparison to reference sample from an area not impacted by tsunami. It is possible that the metals and metalloids are successively moved to more bioavailable fraction from forms which were more resistant to mobilization.     

The influence of meander bend evolution on the formation of multiple cutoffs: findings inferred from floodplain architecture and bend geometry

The evolution of meander bends and formation of cutoffs, including a series of cutoffs developed simultaneously in a number of bends, have been investigated by many researchers. However, relatively little is known about factors that lead to the development of multiple cutoffs that are formed subsequently at one location. The present study aims to determine the influence of meander bend development on multiple chute cutoff formation in a single bend. The research is based on the sedimentary record of meander migration and cutoffs preserved in a lowland river floodplain (the lower Obra River, Poland). Analysis of changes in meander geometry was conducted to describe the influence of their migration on cutoff formation and in other rivers where multiple cutoffs occurred. The results showed that multiple cutoffs in the lower Obra River have occurred during the last 3000 years, owing to the interaction of upstream and downstream controls: migration of meander bends in opposing directions accompanied by an increase of flood frequency and sediment supply. The flow and sediment supply has been further altered since the nineteenth century due to anthropogenic impacts: an artificial cutoff of the downstream bend and elevation of channel levées. Similar mechanisms driving the formation of multiple cutoff have been found in other river courses, despite significantly higher energy of the compared rivers. Moreover, development of a confined‐shape bend (caused by artificial barrier or autogenic bend behaviour) may also favour the formation of multiple cutoffs. However, counter migration of meanders enhanced by increased flood frequency and sediment supply are primary triggers for such events. Copyright © 2015 John Wiley & Sons, Ltd.     

Estimation of the elastic earth parameters using slr data for the low satellites STARLETTE and STELLA

In this paper we present estimated values for the global elastic parameters (k ₂, k ₃) and (h ₂, l ₂) derived from the analysis of Satellite Laser Ranging (SLR) data. We analyse SLR data for two low satellites, STARLETTE and STELLA, collected over a period of two years, from 1 January 2005 to 1 January 2007, from 18 globally distributed ground stations. We carry out a sequential analysis for the two satellites jointly, and study the stability of the estimates as a function of the length of the data set used. The adjusted final values of (k ₂, k ₃) and (h ₂, l ₂) for STARLETTE and STELLA are compared to, and are largely found to support, the estimates we previously published based on data for two high satellites LAGEOS 1 and LAGEOS 2. A major discrepancy between the two solutions was only found for the Shida number l ₂.     

Lossless compression of hydroacoustic image data

Despite rapid progress in improving mass-storage density and digital communication system performance, compression of hydroacoustic image data is still significant in many engineering and research areas since it can overcome data storage and transmission bandwidth limitations. In this paper, we present a novel and effective approach for lossless compression of hydroacoustic image data which consists of two stages. The first stage reduces the information redundancy. We propose several new techniques to remove redundancy between data samples, data blocks, and data frames. The second stage uses a newly developed cascade coding scheme. This simple scheme can achieve an efficiency of 97%. A decomposition algorithm is presented for finding the optimal cascade coding parameters. The algorithm decomposes a multivariable optimization problem into a series of one-variable optimizations. Our two-stage algorithm offers a compression ratio of 2-3 and provides an exact recovery of the original data. Because of its simplicity, the algorithm can be incorporated into a variety of echo sounder systems. The compression algorithms can also be implemented using low-level assembly language to meet the requirements of real-time applications     

A novel array of elliptic ring radiators

An array of elliptic ring radiators is proposed which generates a fan-type beam with controllable sidelobe levels. Such an array has applications in specialized acoustic systems such as sidescan sonars, sonars for fish finding and stock assessment, obstacle avoidance systems, and others. Two possible approaches to the design are presented. One approach utilizes a mapping which transforms a radiation pattern generated by a circular ring array to that of an elliptic ring array. This approach takes advantage of methodologies developed for the design of circular ring arrays. The other approach uses the concept of an equivalent linear array. This approach benefits from existing design techniques developed for linear arrays. It requires only simple matrix operations and does not involve any optimization. The design examples presented demonstrate that a fan-type beam with sidelobes suppressed to more than 40 dB in all possible directions is achievable     

Tsunami detectability using open-ocean bottom pressure fluctuations

Rationale for the measurement of open-ocean tsunami signatures are presented, and available pertinent data are reviewed. Models for tsunami signature and background noise are proposed in order to synthesize an optimum tsunami receiver. Using these models, the minimum tsunami amplitude (in cm) to yield the probability of correct tsunami detectionP_{D} = 0.999and probability of false alarmP_{F} = 10^{-3}is found to be0.718/sqrt{f_{0}}, wheref_{0}is the tsunami dominant frequency (in cycles/h). A realizable receiver is proposed and its performance is evaluated using actual tsunami signatures. It is demonstrated that the detection of a tsunami with an average amplitude as small as 0.7 cm is possible for theP_{D}andP_{F}as above. Simulation results using synthesized background noise are shown. Tidal effects on the receiver performance also are considered and are found negligible for a certain range of the receiver parameters, resulting in a considerable reduction of the signal processing required.     

Impact of forecasted land use changes on flood risk in the Polish Carpathians

Flooding is a major environmental hazard in Poland with risks that are likely to increase in the future. Land use and land cover (LULC) have a strong influencing on flood risk. In the Polish Carpathians, the two main projected land use change processes are forest expansion and urbanization. These processes have a contradictory impact on flood risk, which makes the future impact of LULC changes on flooding in the Carpathians hard to estimate. In this paper, we investigate the impact of the projected LULC changes on future flood risk in the Polish Carpathians for the test area of Ropa river basin. We used three models of spatially explicit future LULC scenarios for the year 2060. We conduct hydrological simulations for the current state and for the three projected land use scenarios (trend extrapolation, ‘liberalization’ and ‘self-sufficiency’). In addition, we calculated the amount of flood-related monetary losses, based on the current flood plain area and both actual and projected land use maps under each of the three scenarios. The results show that in the Ropa river, depending on scenario, either peak discharge decreases due to the forest expansion or the peak discharge remains constant—the impact of LULC changes on the hydrology of such mountainous basins is relatively low. However, the peak discharges are very diverse across sub-catchments within the modeling area. Despite the overall decrease of peak discharge, there are areas of flow increase and there is a substantial projected increase in flood-related monetary losses within the already flood-prone areas, related to the projected degree of urbanization.     

Precise Multibeam Acoustic Bathymetry

The maximum error in ocean depth measurement as specified by the International Hydrographic Organization is 1% for depth greater than 30m. Current acoustic multibeam bathymetric systems used for depth measurement are subject to errors from various sources which may significantly exceed this limit. The lack of sound speed profiles may be one significant source of error. Because of the limited ability of sound speed profile measurement, depth values are usually estimated using an assumed profile. If actual sound speed profiles are known, depth estimate errors can be corrected using ray-tracing methods. For depth measurements, the calculation of the location at which a sound pulse impinges on the sea bottom varies with the variation of the sound speed profile. We demonstrate that this location is almost unchanged for a family of sound speed profiles with the same surface value and the same area under them. Based on this observation, we can construct a simple constant-gradient equivalent sound speed profile to correct errors. Compared with ray-tracing methods, the equivalent sound speed profile method is more efficient. If a vertical depth is known (or independently measured), then depth correction for a multibeam system can be accomplished without knowledge of the actual sound speed profile. This leads to a new type of precise acoustic multibeam bathymetric system.     

Rationale for measurement of midocean tsunami signature

Abstract

Arguments are presented to justify midocean tsunami measurements and related investigations aimed toward improvement of tsunami prediction and warning. It is postulated that midocean tsunami signatures be measured simultaneously at several locations and correlated with high‐accuracy onshore measurements.