Optimization for performance-based design under seismic demands,including social costs

Performance-based design in earthquake engineering is a structural optimization problem that has, as the objective, the determination of design parameters for the minimization of total costs, while at the same time satisfying minimum reliability levels for the specifi ed performance criteria. Total costs include those for construction and structural damage repairs, those associated with non-structural components and the social costs of economic losses, injuries and fatalities. This paper presents a general framework to approach this problem, using a numerical optimization strategy and incorporating the use of neural networks for the evaluation of dynamic responses and the reliability levels achieved for a given set of design parameters. The strategy is applied to an example of a three-story offi ce building. The results show the importance of considering the social costs, and the optimum failure probabilities when minimum reliability constraints are not taken into account.     

Seismic response of nonstructural components in case of nonlinear structures based on floor response spectra method

This paper investigates the response of nonstructural components in the presence of nonlinear behavior of the primary structure using floor response spectra method (FRS). The effect of several parameters such as initial natural frequency of the primary structure, natural frequency of the nonstructural components (subsystem), strength reduction factor and hysteretic model have been studied. A database of 164 registered ground acceleration time histories from the European Strong-Motion Database is used. Results are presented in terms of amplification factor and resonance factor. Amplification factor quantifies the effect of inelastic deformations of the primary structure on subsystem response. Resonance factor quantifies the variation of the subsystem response considering the primary structure acceleration. Obtained results differed from precedent studies, particularly for higher primary structure periods. Values of amplification factor are improved. Obtained results of resonance factor highlight an underestimation of peak values according to current design codes such as Eurocode 8. Therefore a new formulation is proposed.     

Effect of lateral variation and model parameterization on surface wave dispersion inversion to estimate the average shallow structure in the Paraná Basin

The average layered structure of the intracratonic Paraná Basin, SE Brazil, is investigated with surface-wave group velocities from a small regional earthquake recorded by two broadband stations. Rayleigh and Love waves in the period range 1–4.2 s are used to infer average properties down to about 4 km. Genetic algorithm techniques are used to find the best fitting 1-D S-wave model. The inverted 1-D models show fair correlation with the average properties of the propagation paths as expected from geology and borehole information. However, different S-wave velocity models are obtained for the different inversion parameterizations. Since lateral heterogeneities are expected along the paths, several synthetic tests are performed with heterogeneous propagation paths. For approximately homogenous path (i.e., little lateral variation), the main features of the average synthetic model can be retrieved for different model parameterizations. For strong lateral variations, however, the average dispersion curve can produce very different 1-D inverted models depending on the parameterization. Also, the 1-D inverted models may differ significantly from the average properties of the inhomogeneous path, and wrong depths to interfaces may be inferred. For real data inversions, it is then suggested that various different parameterizations should be tested. If the resulting models show consistent features, this probably indicates homogeneity in the propagation path. But, if very different and unstable features are obtained in the 1-D inversions, then strong lateral variation may be present in the propagation path, and the average 1-D model may not represent average properties along the path.     

Stable isotope study of cave percolation waters in subtropical Brazil: Implications for paleoclimate inferences from speleothems

We analyze the interannual monthly variability of oxygen isotope ratios in data from IAEA stations along the Atlantic coast of South America between 23° and 34° S to evaluate the influence of parameters such as temperature, rainfall amount and moisture source contribution on meteoric water recharging two karst systems in subtropical Brazil. In addition, a 2 year monitoring program performed on soil and cave drip and rimstone pool waters from sampling sites with contrasting discharge values and located at 100 and 300 m below the surface in the Santana Cave System (24°31′ S; 48°43′ W), is used to test the influence of hydrologic and geologic features on the temporal variations of seepage water δ¹⁸O.

Interannual monthly variations in δ¹⁸O of rainfall reflect primarily regional changes in moisture source contribution related to seasonal shifts in atmospheric circulation from a more monsoonal regime in summer (negative values of δ¹⁸O) to a more extratropical regime in winter (positive values of δ¹⁸O). Variations in groundwater δ¹⁸O indicate that the climatic signal of recent rainfall events is rapidly transmitted through the relatively deep karst aquifer to the cave drip waters, regardless of location of collection in the cave. In addition, the data also suggest that water replenishment in the system is triggered by the increase in hydraulic head during periods when recharge exceeds the storage capacity of the soil and epikarst reservoirs. Significant perturbations in the groundwater composition, characterized by more positive values of δ¹⁸O, are probably connected to an increased Atlantic moisture contribution associated with extratropical precipitation. This implies that the δ¹⁸O of speleothems from caves in this region may be a suitable proxy for studying tropical–extratropical interactions over South America, a feature that is intrinsically related to the global atmospheric circulation.     

On constitutive modelling of unsaturated soils

The paper presents a review of constitutive modelling of unsaturated soils. After a brief historical perspective, a number of existing constitutive models are classified and discussed according to the type of stress variables adopted in their formulation. Afterwards, attention is given to recent developments in the proposal of coupled hydraulic-mechanical models and the possibility of casting them in a sound thermodynamical framework. Finally, a double structure model for expansive soils is described. The incorporation of microstructural considerations and its use as a platform for incorporating the influence of new variables are highlighted.     

Late Quaternary paleosols, stratigraphy and landscape evolution in the Northern Pampa, Argentina

The field properties, micromorphology, grain-size, geochemistry, and optically stimulated luminescence (OSL) ages of two late Quaternary sections have been used to reconstruct the sequence of pedosedimentary processes and to provide insights into landscape evolution in part of the Northern Pampa of Argentina. Paleosols developed in paludal sediments adjacent to the Paraná river at Baradero and in loess at Lozada can both be correlated and linked to other sites, thus enabling for the first time the tentative recognition and tracing of a diachronous soil stratigraphic unit that probably spans the equivalent of at least part of marine oxygen isotope stage (OIS) 5. The paleosol at Lozada was truncated and buried beneath fluvial sediments during the time span of OIS 4 and 3. Eolian gradually replaced paludal inputs at Baradero over this period, and there were also two clearly defined breaks in sedimentation and development of paleosols. The period corresponding to OIS 2 was marked by significant loess accumulation at both sites with accretion continuing into the mid-Holocene only at Lozada. The more developed nature of the surface soil at Baradero probably reflects a combination of a moister climate and a longer soil-forming interval.     

Diatom responses to environmental changes in the Upper Paraná River floodplain (Brazil) during the last ~ 1000 years

The floodplain of the Upper Paraná River, Brazil, is strongly influenced by hydrology, which in turn affects geomorphological and environmental conditions, and controls the form of islands in the river. Such islands develop by deposition of river-borne sediment that creates small lateral sediment bars. Geomorphological processes can produce a variety of aquatic environments on such islands, e.g. channels, backwaters, lakes, transitional areas, and swamps. Our objective was to test whether subfossil diatoms preserved in the sediment on an island in the Upper Paraná River floodplain responded to changes in limnological conditions brought about by such geomorphological modifications. We hypothesized that the composition of diatom assemblages in the sediment shifted in response to past geomorphic, and hence limnological conditions. We analyzed diatom subfossils in a 2-m-long sediment core with a calibrated date near the base of 1047–1224 cal yr AD. Absence of diatoms at the bottom of the sequence was associated with the channel phase, followed by appearance of diatoms 1229–1381 cal yr AD that were adapted to flow, in the backwater phase. After another 100–200 years, presence of Eunotia species in the lake phase suggests a decrease in pH, phosphorus and nitrogen. Replacement of Eunotia spp. by Diadesmis species, following a transition phase, suggests different environmental conditions, with reduced water depth. Diatoms in surface deposits are distinct from assemblages in the other phases in the core and contain taxa that suggest a disturbed environment, with variations in water depth and flow. The data illustrate the importance of physical and hydrological factors in shaping diatom communities and show the utility of diatoms as bioindicators in this floodplain environment.     

Influence of tidal regime,diurnal phase,habitat and season on feeding of an intertidal crab

The relationship between diet and feeding activity of intertidal crabs, and environmental cycles (tidal, daily and seasonal), habitat and level of the intertidal zone (high/low) was studied using Neohelice granulata (Brachyura, Varunidae) as a model. This is a semi‐terrestrial burrowing crab occupying different habitats in the Southwestern Atlantic coasts and estuaries from bare low intertidal mudflats to high intertidal salt marshes, and from fine, organic matter rich sediment to very coarse sediment with low content of organic matter. The study was carried out in two contrasting habitats of three sites with diverse sets of physical and biological conditions. Diet and feeding of adult N. granulata were indirectly studied through the proportion of food items and the presence/absence of food in crab stomachs, respectively. This species has a dual mode of feeding: predominantly herbivorous (live plants or plant litter in salt marshes) or deposit feeder (superficial sediment and detritus in mudflats), but the quantity and quality of ingested food varies among habitats and sites. A trend to omnivory (including algae and conspecifics) was detected in relation to low quality of resources. Feeding activity modulated by a complex interaction of factors varied according to spatial and/or temporal changes in some natural cycles. Males and non‐ovigerous females fed preferably after dark and during submersion periods, but also after emersion periods if mudflat sediment remained wet; salt marsh crab feeding is somewhat independent of light and tidal cycles. Ovigerous females almost never fed. Both diet and feeding activity of this crab seem to be flexible traits adapted to different combinations of physical and biological factors.     

The Santa Filomena meteorite shower: Trajectory,classification, and opaque phases as indicators of metamorphic conditions

On August 19, 2020, at 13:18—UTC, a meteor event ended as a meteorite shower in Santa Filomena, a city in the Pernambuco State, northeast Brazil. The heliocentric orbital parameters resulting from images by cameras of the weather broadcasting system were semimajor axis a = 2.1 ± 0.1 au, eccentricity e = 0.55 ± 0.03, and inclination i = 0.15^o ± 0.05. The data identified the body as an Apollo object, an Earth-crossing object with a pericenter interior to the Earth's orbit. The chemical, mineralogical, and petrological evaluations, as well as the physical analysis, followed several traditional techniques. The meteorite was identified as a H5-6 S4 W0 ordinary chondrite genomict breccia. The large amount of metal in the meteorite made a metallographic evaluation based on the opaque phases possible. The monocrystalline kamacite crystals suggest a higher petrological type and the distorted Neumann lines imply at least two different shock events. The absence of the plessite phase shows that the meteorite did not reach the highest shock levels S5 and S6. The well-defined polycrystalline taenite is indicative of petrologic types 4 and 5 due to the conserved internal tetrataenite rim at the boundaries. The presence of polycrystalline taenites and the characteristics of the Agrell Effect suggest that the Santa Filomena meteorite did not reheat above 700°C. The absence of martensite confirms reheating temperatures <800°C and a slow cooling rate. The Ni contents and sizes of the zoned taenite particles indicate a slow cooling rate ranging from 1 to 10 K Myr⁻¹.