Shear and vorticity in an accelerating Brans-Dicke lambda-Universe with torsion

We study accelerating Universes with power-law scale-factors. We include shear and vorticity, a cosmological “constant” term, and spin from torsion, as in Einstein-Cartan’s theory when a scalar-field of Brans-Dicke type acts in the model. We find a “no-hair” result, for shear and vorticity; we also make contact with the alternative Machian picture of the Universe.     

A general relativistic rotating evolutionary universe

We show that when we work with coordinate cosmic time, which is not proper time, Robertson-Walker’s metric, includes a possible rotational state of the Universe. An exact formula for the angular speed and the temporal metric coefficient, is found.     

Shear and vorticity in a combined Einstein-Cartan-Brans-Dicke inflationary lambda-Universe

A combined BCDE (Brans-Dicke and Einstein-Cartan) theory with lambda-term is developed through Raychaudhuri’s equation, for inflationary scenario. It involves a variable cosmological constant, which decreases with time, jointly with energy density, cosmic pressure, shear, vorticity, and Hubble’s parameter, while the scale factor, total spin and scalar field increase exponentially. The post-inflationary fluid resembles a perfect one, though total spin grows, but the angular speed does not (Astrophys. Space Sci. 312: 275, 2007d).      

Optimization of photovoltaic solar power plant locations in northern Chile

The optimization of photovoltaic solar power plants location in Atacama Desert, Chile, is presented in this study. The study considers three objectives: (1) Find sites with the highest solar energy potential, (2) determine sites with the least impact on the environment, and (3) locate the areas which produce small social impact. To solve this task, multi-criteria decision analyses (MCDAs) such as analytical hierarchy process and ordered weighted averaging were applied in a GIS environment. In addition, survey results of social impacts were analyzed and included into the decision-making process, including landscape values. The most suitable sites for solar energy projects were found near roads and power lines throughout the study area. Large suitable areas were found also from central valley from Arica and Parinacota to the north edge of Atacama region. In Atacama region, most suitable sites were found in the Andes. On the contrary, Andes were also found to have high environmental values and scenically valuable landscapes. Moderate and low suitability were found on the coast, especially in Atacama region. Factors such as slope and distance to power lines and roads influenced largely the sensitivity analysis. Area of high suitability increased by 15% when distance to roads was excluded and 18% when distance to power lines or slope was removed. MCDA-GIS method was found to be useful and applicable to the optimization of solar power plant locations in northern Chile.     

Application of the K?ppen classification for climatic zoning in the state of Minas Gerais, Brazil

The knowledge of the climatic conditions of a region is crucial for its agricultural development. It is also extremely important for understanding the fact that certain cultures have to develop under prevailing temperature and humidity conditions and assist in the adoption of a suitable irrigation technique, as well as its management and operationalization. The K?ppen system of climate classification is widely used for the identification of homogeneous climate zones as it considers only rainfall and temperature as the meteorological elements for classification. For this study, we used climatic databases of rainfall and temperature in a raster format, with a spatial resolution of 30″ of arc (an approximate area of 0.86?km²?pixel^?1), from 1961 to 1990. Through geoprocessing techniques, we obtained a map of climatic classification for the state of Minas Gerais. We found that the state has the following three major climatic groups: A, B and C, which correspond to tropical rainy, dry and warm temperate climates, respectively. The climate classes obtained were Aw, Am, BSh, Cwa and Cwb, with Aw, Cwa and Cwb classes occupying 99.89% of the territorial area of the state. The validation of the results showed a satisfactory agreement, with 93.75% reliability.     

Palaeolimnological studies and ancient maps confirm secular climate fluctuations in Amazonia

Secular Amazon discharge oscillations were investigated comparing information from ancient cartography, satellite images, palaeovegetation, sediments, anthropology and climate, focusing on the evolution of Marajó Island in the Amazon estuary. Four phases were identified. (1) 800–1200 a.d.: Amazon discharge increased gradually and eastern Marajó was a vegetation-free tidal plain with energy oscillations. (2) 1200–1350 a.d. was a dry period with lower river discharges, lower energy, increasing water salinities and maximum mangrove extension, coinciding with the extinction of chiefdoms in Marajó. (3) 1350–1540 a.d.: Amazon discharge increased rapidly, inducing a dominance of freshwater vegetation, inundation of east Marajó and likely a regional rise of relative sea-level (RSL). (4) 1540–1750 a.d.: RSL decreased, coinciding with an El Niño-related intense drought ca. 1600 a.d. Emergence of eastern Marajó was rapid and completed in the eighteenth century, under RSL stabilization to current values. The approach used provided evidence of intermittent large changes in Amazon climate, and can facilitate the prediction of future regional dynamics.     

A velocity field estimation of the Brazilian portion of the SOAM plate

With the proposition for the adoption of Geocentric Reference System for the Americas (SIRGAS) as a terrestrial reference frame for South America, the need for temporal monitoring of station coordinates used in its materialization has become apparent. This would provide a dynamic characterization of the frame. The Brazilian Network for Continuous Monitoring of GPS (RBMC) has collected high accuracy GPS measurements since 1996. The Brazilian Institute of Geography and Statistics (IBGE) maintains this network in collaboration with several universities and organizations. Most of the stations are also part of the SIRGAS network. The RBMC also contributes data to the International Terrestrial Reference System (ITRS) to densify the global frame. Two of the RBMC stations are also part of the International GPS Service (IGS). This paper reports initial results from these stations. To estimate the velocity field defined by these stations, ten IGS stations located on the border of the South American plate and in adjacent plates, along with nine RBMC stations, were used. Observations covering five groups of 15 days each were used. These groups of observations were at epochs 1997.3, 1997.9, 1998.3, 1998.9 and 1999.2. Seven IGS stations were chosen to have their coordinates constrained to those epochs. IGS products (precise ephemeris and clocks) were used to process the daily solutions, which were carried out with Bernese software. Carrier phase double differences were formed using the ionospheric-delay free observable. The troposphere was modeled using a combination of the Saastamoinen model and the Niell mapping function. A tropospheric parameter was estimated every two hours. The results of the daily baseline solutions were combined using the summation of normal equations technique, in which the final coordinates and velocities were estimated. The results were compared with various models, such as the NNR-NUVEL1 and the APKIM8.80. Velocity vectors estimated for the RBMC stations show good agreement with those two models, with rates approximately equal to 2 cm/year.     

A double structure generalized plasticity model for expansive materials

The constitutive model presented in this work is built on a conceptual approach for unsaturated expansive soils in which the fundamental characteristic is the explicit consideration of two pore levels. The distinction between the macro‐ and microstructure provides the opportunity to take into account the dominant phenomena that affect the behaviour of each structural level and the main interactions between them. The microstructure is associated with the active clay minerals, while the macrostructure accounts for the larger‐scale structure of the material. The model has been formulated considering concepts of classical and generalized plasticity theories. The generalized stress–strain rate equations are derived within a framework of multidissipative materials, which provides a consistent and formal approach when there are several sources of energy dissipation. The model is formulated in the space of stresses, suction and temperature; and has been implemented in a finite element code. The approach has been applied to explaining and reproducing the behaviour of expansive soils in a variety of problems for which experimental data are available. Three application cases are presented in this paper. Of particular interest is the modelling of an accidental overheating, that took place in a large‐scale heating test. This test allows the capabilities of the model to be checked when a complex thermo‐hydro‐mechanical (THM) path is followed. Copyright © 2005 John Wiley & Sons, Ltd.     

The role of the Antofagasta–Calama Lineament in ore deposit deformation in the Andes of northern Chile

During the Late Jurassic–Early Oligocene interval, widespread hydrothermal copper mineralization events occurred in association with the geological evolution of the southern segment of the central Andes, giving rise to four NS-trending metallogenic belts of eastward-decreasing age: Late Jurassic, Early Cretaceous, Late Paleocene–Early Eocene, and Late Eocene–Early Oligocene. The Antofagasta–Calama Lineament (ACL) consists of an important dextral strike-slip NE-trending fault system. Deformation along the ACL system is evidenced by a right-lateral displacement of the Late Paleocene–Early Eocene metallogenic belts. Furthermore, clockwise rotation of the Early Cretaceous Mantos Blancos copper deposit and the Late Paleocene Lomas Bayas porphyry copper occurred. In the Late Eocene–Early Oligocene metallogenic belt, a sigmoidal deflection and a clockwise rotation is observed in the ACL. The ACL is thought to have controlled the emplacement of Early Oligocene porphyry copper deposits (34–37 Ma; Toki, Genoveva, Quetena, and Opache), whereas it deflected the Late Eocene porphyry copper belt (41–44 Ma; Esperanza, Telégrafo, Centinela, and Polo Sur ore deposits). These observations suggest that right-lateral displacement of the ACL was active during the Early Oligocene. We propose that the described structural features need to be considered in future exploration programs within this extensively gravel-covered region of northern Chile.     

Treatment of a Trifluraline Effluent by Means of Oxidation‐Coagulation with Fe(VI) and Combined Fenton Processes

The amination water (AW) effluent stream from the industrial production of the trifluraline herbicide was submitted to an oxidation‐coagulation treatment with potassium ferrate, combined with advanced oxidation processes. The experimental results obtained by analysis of variance (ANOVA) for the oxidation‐coagulation‐Fenton process, evaluating the variables pH (A), Fe(VI) concentration (B), and H₂O₂ concentration (C), demonstrated that the regression equation resulting from the Response Surface Methodology (RSM) experimental design, for the quadratic model, was η_Abs (%) = 36.9– 21.58A + 8.37A² + 1.36B + 0.92B² + 1.08C + 1.52C² + 1.27AB – 1.34AC + 1.33BC. The maximum absorptiometric color reduction occurred at pH 3, with corresponding maximum amounts of iron and hydrogen peroxide. The absorptiometric color and COD reduction were 96% and 57%, respectively. For the oxidation‐coagulation‐photo‐Fenton process, the analyzed variables were pH (A), Fe(VI) concentration (B), H₂O₂ concentration (C), and temperature (D). The regression equation resulting from the quadratic model was η_Abs (%) = 38.3 – 20.2A + 8.12A² – 0.27B + 3.73B² + 0.3C + 3.6C² + 1.67D + 3.1D² + 1.72AB + 0.51AC – 1.82AD + 0.74BC – 1.11BD + 0.03CD. The ANOVA response showed that the highest absorptiometric color reduction occurred at pH 3, with respective maximum amounts of iron and hydrogen peroxide at 60°C. The maximum efficiencies achieved by the proposed treatment process for the trifluraline effluent stream were 95% and 85%, for absorptiometric color and COD reduction, respectively.