The effects of surface area, grain size and mineralogy on organic matter sedimentation and preservation across the modern Squamish Delta, British Columbia: the potential role of sediment surface area in the formation of petroleum source rocks

Surface sediment samples were collected from the Squamish River Delta, British Columbia, in order to determine the role of sediment surface area in the preservation of organic matter (OM) in a paralic sedimentary environment. The Squamish Delta is an actively prograding delta, located at the head of Howe Sound.Bulk total organic carbon (TOC) values across the Squamish Delta are low, ranging from 0.1 to 1.0 wt.%. The carbon/total nitrogen ratio (C_org/N) ranges from 6 to 17, which is attributed to changes in OM type and facies variations. The <25-μm fraction has TOC concentrations up to 2.0 wt.%, and a C_org/N ratio that ranges from 14 to 16. The 53–106-μm fraction has higher TOC concentrations and C_org/N ratios relative to the 25–53-μm fraction. The C_org/N ratio ranges from 9 to 18 in the 53–106-μm fraction and 5.5–10.5 in the 25–53-μm fraction. Surface area values for bulk sediments are low (0.5–3.0 m²/g) due to the large proportion of silt size material. Good correlation between surface area and TOC in bulk samples suggests that OM is adsorbed to mineral surfaces. Similar relationships between surface area and TOC were observed in size-fractionated samples. Mineralogy and elemental composition did not correlate with TOC concentration.The relationships between surface area, TOC and total nitrogen (TN) can be linked to the hydrodynamic and sedimentological conditions of the Squamish Delta. As a result, the Squamish Delta is a useful modern analogue for the formation of petroleum source rocks in ancient deltaic environments, where TOC concentrations are often significantly lower than those in source rocks formed in other geological settings.     

Recent plumbing system of the Krakatau volcano revealed by teleseismic earthquake distribution

Spatial and temporal analysis of global seismological data 1964–2005 reveals a distinct teleseismic earthquake activity producing a columnar-like formation in the continental wedge between the Krakatau volcano at the surface and the subducting slab of the Indo-Australian plate. These earthquakes occur continuously in time, are in the body-wave (m _b) magnitude range 4.5–5.3 and in the depth range 1–100 km. The Krakatau earthquake cluster is vertical and elongated in the azimuth N30°E, suggesting existence of a deep-rooted fault zone cutting the Sunda Strait in the SSW-NNE direction. Possible continuation of the fault zone in the SW direction was activated by an intensive 2002/2003 aftershock sequence, elongated in the azimuth of N55°E. Beneath the Krakatau earthquake cluster, an aseismic gap exists in the Wadati-Benioff zone of the subducting plate at the depths 100–120 km. We interpret this aseismic gap as a consequence of partial melting inhibiting stress concentration necessary to generate stronger earthquakes, whereas the numerous earthquakes observed in the overlying lithospheric wedge beneath the volcano probably reflect magma ascent in the recent plumbing system of the Krakatau volcano. Focal depth of the deepest events (~100 km) of the Krakatau cluster constrains the location of the primary magma generation to greater depths. The ascending magmatic fluids stress fault segments within the Sunda Strait fault zone and change their friction parameters inducing the observed tectonic earthquakes beneath Krakatau.     

Rainfall-triggering response patterns of post-seismic debris flows in the Wenchuan earthquake area

Several giant debris flows occurred in southwestern China after the Wenchuan earthquake, causing serious casualties and economic losses. Debris flows were frequently triggered after the earthquake. A relatively accurate prediction of these post-seismic debris flows can help to reduce the consequent damages. Existing debris flow prediction is almost based on the study of the relationship between post-earthquake debris flows and rainfall. The relationship between the occurrence of post-seismic debris flows and characteristic rainfall patterns was studied in this paper. Fourteen rainfall events related to debris flows that occurred in four watersheds in the Wenchuan earthquake area were collected. By analyzing the rainfall data, characteristics of rainfall events that triggered debris flows after the earthquake were obtained. Both the critical maximum rainfall intensity and average rainfall intensity increased with the time. To describe the critical conditions for debris flow initiation, intensity–duration curves were constructed, which shows how the threshold for triggering debris flows increased each year. The time that the critical rainfall intensities of debris flow occurrences return to the value prior to the earthquake could not be estimated due to the absent rainfall data before the earthquake. Rainfall-triggering response patterns could be distinguished for rainfall-induced debris flows. The critical rainfall patterns related to debris flows could be divided on the basis of antecedent rainfall duration and intensity into three categories: (1) a rapid triggering response pattern, (2) an intermediate triggering response pattern, and (3) a slow triggering response pattern. The triggering response patterns are closely related to the initiation mechanisms of post-earthquake debris flows. The main difference in initiation mechanisms and difference in triggering patterns by rainfall is regulated by the infiltration process and determined by a number of parameters, such as hydro-mechanical soil characteristics, the thickness of the soil, and the slope gradient. In case of a rapid triggering response rainfall pattern, the hydraulic conductivity and initial moisture content are the main impact factors. Runoff erosion and rapid loading of solid material is the dominant process. In case of a rainfall pattern with a slow triggering response, the thickness and strength of the soil, high hydraulic conductivity, and rainfall intensity are the impact factors. Probably slope failure is the most dominant process initiating debris flows. In case of an intermediate triggering response pattern, both debris flow initiation mechanisms (runoff erosion and slope failure) can play a role.     

滇东南富宁地区基性侵入岩与峨眉山地幔柱存在成因关系吗?——来自1∶5万洞波幅和皈朝幅地质填图的证据

在滇东南富宁地区,出露一系列以辉绿岩为主、含少量辉长辉绿岩和辉绿玢岩的基性侵入岩。根据地球化学、同位素地球化学以及锆石U-Pb年代学等分析结果,前人将这些基性侵入岩视作峨眉山大火成岩省的组成部分,源自峨眉山地幔柱。国内外研究的共识认为,峨眉山地幔柱活动发生于263~252Ma之间,持续时间极短。在开展1∶2.5万大比例尺地质调查与填图(洞波幅和皈朝幅1∶5万地质调查手图)过程中,我们发现,这些基性侵入岩不仅侵入古生代地层,还侵入了富宁县皈朝一带的晚二叠世-中三叠世岛弧玄武安山岩(255~241Ma)以及早-中三叠世地层。这些地质事实表明,富宁地区基性侵入岩的形成时代至少晚于中三叠世Anisian期或更晚,与峨眉山地幔柱活动时代存在很大的时差,岩石类型与组合上也与峨眉山大火成岩省的有很大差异。根据我们填图过程中获得的基本地质事实分析,滇东南富宁地区的基性侵入岩是华南地块与北越地块间的古特提斯分支洋盆闭合、两个地块碰撞造山(即印支造山)后的岩浆活动产物,与峨眉山地幔柱没有成因关系。     

Comparative study of tracer diffusion of HTO, Na and Cl in compacted kaolinite, illite and montmorillonite

The through-diffusion of HTO, ²²Na⁺ and ³⁶Cl⁻ in kaolinite, homo-ionic Na-illite and homo-ionic Na-montmorillonite was measured at a high degree of compaction as a function of the salt concentration in the ‘external solution’, i.e. in the solution in contact with the clay sample. The clays were chosen for this study because of their differences in the number and nature of ion exchange sites leading to different proportions of interlayer-, inter-particle and free pore water. It was found that the diffusive mass transfer of Na⁺ in Na-montmorillonite and Na-illite increased with decreasing external salt concentration, while the opposite trend was observed for the diffusion of Cl⁻. These trends are more pronounced in the case of Na-montmorillonite than in Na-illite, while almost no salt effect was observed for kaolinite. Similarly no salt effect was observed for the diffusion of HTO through all of the clays tested. These observations are in agreement with a conceptual model where it is assumed that cations diffuse preferentially in the interlayer or diffuse double-layer porosity, while anions are almost completely excluded from these regions. In the case of Na⁺ diffusion, the salt effects can be explained by an influence on the concentration gradient of diffusing cations, while in the case of Cl⁻ the external salt concentration has an effect on the accessible porosity. Effective diffusion coefficients of Cl⁻ fulfil the same relationship to porosity as those of the uncharged HTO, when using accessible porosities for such a comparison. Furthermore it is shown that pore diffusion coefficients for the three tracers are fairly well correlated with the respective diffusion coefficients in bulk water, if the effective diffusion coefficients for Na⁺ are derived from calculated tracer concentration gradients in the interlayer or diffuse double-layer porosities.     

Modelling of Tsunami Propagation in the Vicinity of the French Coast of the Mediterranean

The problem of tsunami-risk for the French coast of the Mediterraneanis discussed. Historical data of tsunami manifestation on the French coast are described and analysed.Numerical simulation of potential tsunamis in the Ligurian Sea is done and the tsunami wave heightdistribution along the French coast is calculated. For the earthquake magnitude 6.8 (typical value forMediterranean) the tsunami phenomenon has a very local character. It is shown that the tsunami tide-gaugerecords in the vicinity of Cannes–Imperia present irregularoscillations with characteristic periodof 20–30 min and total duration of 10–20h.Tsunami propagating from the Ligurian sea to the west coastof France have significantly lesser amplitudes and they are more low-frequency (period of 40–50min).The effect of far tsunamis generated in the southern Italy and Algerian coast is studied also, thedistribution of the amplitudes along the French coast for far tsunamis is more uniform.     

Al hematites prepared by homogeneous precipitation of oxinates: material characterization and determination of the Morin transition

A novel method for synthesis of aluminium hematites, based upon the homogeneous precipitation of Fe and Al oxinates in various proportions, is presented. The precursor precipitates are heated in air at 700?°C. X-ray diffraction, thermal analyses, BET, FTIR, optical reflection analysis, TEM and Mössbauer spectroscopy at room temperature and 80?K of the resulting products indicate that single-phase hematites are formed with structural Al substitution of up to 10 at%. Interestingly, the particle size (>100?nm) is not substantially reduced by the Al content. Although it remains difficult to obtain a homogeneously distributed Al substitution in the final hematite, this processing line offers a unique opportunity to separate the effects of grain size and Al substitution on the Morin transition temperature (T _M) of Al hematite. From the comparison between the present hematites and a series of Al-substituted hematites with lepidocrocite as precursor, it could be shown that the effect on T _M, associated with a change of a factor 10 in grain size, is about 1/3 of the effect caused by a change of 10 in the degree of substitution. Finally, it is suggested that proper thermal treatments under different conditions of the same precursors are likely to produce spinel phases.     

North-south transfer zones and paleo-morphological reconstruction of the Xylokastro area (Corinth Gulf, Greece)

A large number of studies have documented the structural and sedimentary architecture of the Corinth Gulf, especially the major E–W trending normal faults important in accommodating the main extensional strain and associated growth of the Gilbert fan deltas. However, the role of several N–S oriented structures that crop out at the surface and are detectable at depth by seismic reflection and gravity surveys are not clearly understood. Based on new geological data, collected near Xylokastro, we describe the N–S oriented tectonic activity of this area. The mapped inland faults correspond to off-shore structures identified in re-interpreted seismic lines and appear to have acted as a major transfer zone during the opening of the Corinth Gulf. Reconstruction of the paleo-topography based on sedimentary facies and the environment of clay mineral formation suggest these transfer zones played an important role in controlling both local structural relief and depositional conditions of the Gilbert fan deltas.