Geochemistry and Rb–Sr geochronology of a ductile shear zone in the Orlica-Śnieżnik dome (West Sudetes, Poland)

Amphibolite-facies orthogneisses of the Orlica-vnie™nik dome in the West Sudetes (Poland) show a local continuous transition from weakly deformed augen gneisses to finely laminated mylonites. Field evidence indicates that ductile shearing developed pre- or syntectonically to a migmatization event. Bulk-rock compositions of variably deformed samples yield no indications for deformation- and/or fluid-enhanced element mobility and redistribution. ⁸⁷Rb-⁸⁶Sr geochronology (biotite, phengite, whole rock) places time constraints on the deformation process and the post-orogenic cooling history. Phengite- and biotite-whole-rock pairs yield Rb-Sr ages of 340 to 334 Ma and 335 to 294 Ma, respectively, independent of the degree of deformation. The weighted mean of phengite-whole-rock pairs indicates an age of 337.4DŽ.3 Ma. Combining most of the biotite-whole-rock data yields a weighted mean age of 328.6dž.4 Ma. Because of their different closure temperatures for the Rb-Sr system, these differences are interpreted to date cooling after a thermal event. Direct dating of the deformation is not possible, but the cooling history record defines a minimum age for the development of ductile shearing and the last migmatization event. These time constraints provide evidence for the initiation of crustal collapse during or immediately following peak metamorphic conditions. The results of this study further document the importance of Variscan metamorphism in the Orlica-vnie™nik dome.     

Modelling of Tsunami Propagation in the Vicinity of the French Coast of the Mediterranean

The problem of tsunami-risk for the French coast of the Mediterraneanis discussed. Historical data of tsunami manifestation on the French coast are described and analysed.Numerical simulation of potential tsunamis in the Ligurian Sea is done and the tsunami wave heightdistribution along the French coast is calculated. For the earthquake magnitude 6.8 (typical value forMediterranean) the tsunami phenomenon has a very local character. It is shown that the tsunami tide-gaugerecords in the vicinity of Cannes–Imperia present irregularoscillations with characteristic periodof 20–30 min and total duration of 10–20h.Tsunami propagating from the Ligurian sea to the west coastof France have significantly lesser amplitudes and they are more low-frequency (period of 40–50min).The effect of far tsunamis generated in the southern Italy and Algerian coast is studied also, thedistribution of the amplitudes along the French coast for far tsunamis is more uniform.     

Cosmogenic-nuclide ages for New England coastal moraines, Martha's Vineyard and Cape Cod, Massachusetts, USA

Cosmogenic-nuclide exposure ages for 13 glacially transported boulders atop the Martha's Vineyard moraine, MA, USA, indicate that the southeastern margin of the Laurentide ice sheet reached its maximum extent during the last glaciation 23,200±500 yr ago. Another 10 age determinations from the younger Buzzards Bay moraine near Woods Hole, MA, indicate that this moraine complex was formed 18,800±400 yr ago. These ages correlate approximately with the terminations of cooling cycles recorded in Greenland ice cores and coeval ice-rafting events, suggesting that the marginal position of this sector of the ice sheet was tightly coupled to North Atlantic climate during the last glacial maximum.     

Abundance and distribution of PGE and Au in the island-arc mantle: implications for sub-arc metasomatism

Ultramafic xenoliths from a veined mantle wedge beneath the Kamchatka arc have non-chondritic, fractionated chondrite-normalized platinum-group element (PGE) patterns. Depleted (e.g., low bulk-rock Al₂O₃ and CaO contents) mantle harzburgites show clear enrichment in the Pd group relative to the Ir group PGEs and, in most samples, Pt relative to Rh and Pd. These PGE signatures most likely reflect multi-stage melting which selectively concentrates Pt in Pt–Fe alloys while strongly depleting the sub-arc mantle wedge in incompatible elements. Elevated gold concentrations and enrichment of strongly incompatible enrichment (e.g., Ba and Th) in some harzburgites suggest a late-stage metasomatism by slab-derived, saline hydrous fluids. Positive Pt, Pd, and Au anomalies coupled with Ir depletions in heavily metasomatized pyroxenite xenoliths probably reflect the relative mobility of the Pd and Ir groups (especially Os) during sub-arc metasomatism which is consistent with Os systematics in arc mantle nodules. Positive correlations between Pt, Pd, and Au and various incompatible elements (Hf, U, Ta, and Sr) also suggest that both slab-derived hydrous fluids and siliceous melts were involved in the sub-arc mantle metasomatism beneath the Kamchatka arc.     

Coal mining along the Warfield Fault, Mingo County, West Virginia: a tale of ups and downs

Mine development along a 15-mile (24 km) section of the Warfield Fault in Mingo County, West Virginia has broadened the geological understanding of the fault and its related structures. The fault has been exposed in two new road cuts, one in the northeast-trending segment at Neely Branch and one in the eastern east-trending segment at the head of Marrowbone Creek. Both exposures show a well-defined normal fault with a 45° to 55° N dip, juxtaposing sandstone/shale packages from the roof and the floor of the Coalburg seam. The fault is associated with a thin gouge zone, some drag folding, and parallel jointing. Its trace tends to run parallel to the crest of the adjacent Warfield Anticline. Based on underground mine development and detailed core drilling, the vertical offset along the fault plane ranges from a maximum of 240 ft (73 m) in the central part of the area near the structural bend to less than 100 ft (30 m) in western and eastern directions. The fault is located along the relatively steeply dipping (locally in excess of 25%) southern limb of the Warfield Anticline, and appears related to a late phase of extension involving folded Pennsylvanian strata. On a regional scale, the lithological variations across the fault do not suggest any appreciable strike-slip component.Underground room and pillar mines in the Coalburg seam north and south of the fault have been greatly impacted by the Warfield structures. Due to the combined (and opposite) effects of the folding and faulting, the northern mines are located up to 400 ft (125 m) higher in elevation than the southern ones. Overland conveyor belts connect mining blocks separated by the fault. The practical mining limit along the steep slopes toward the fault is around 15%. Subsidiary normal faults with offsets in the 5- to 15-ft (1.5–4.5 m) range are fairly common and form major roof control and production hurdles. Overall, the Warfield structures pose an extra challenge to mine development in this part of the Appalachian Coalfields.     

A New Tethered Balloon-Borne Payload for Fine-Scale Observations in the Cloudy Boundary Layer

A new scientific payload is introduced for fine-scale measurements of meteorological (wind vector, static air temperature, humidity, and air pressure) and microphysical (aerosol particles and cloud droplets) properties, suspended below a tethered balloon. The high resolution sensors and the tethered balloon are described. Measurements in a lifted fog layer from a first field campaign are presented.The detailed investigation of the fog/haze and the temperature inversion layer demonstrates the damping influence of the fog on temperature fluctuations, while thewind fluctuations are significantly decreased by theevolving temperature inversion, whichwas about 30 m above the fog layer.From spectral analysis the noise floors of the high-resolution sensors are determined to10^-6 kg m^-3 for the LWC (liquid water content) and 4 mK for the fast temperature sensor (UFT-B). The correlation betweentemperature and LWC structures in shallow haze layers is investigated. The release of latent heat and the corresponding warming in the haze of about 0.1 K could be quantified.     

Origin of composite dikes in the Gouldsboro granite, coastal Maine

Composite dikes, consisting of aphyric basaltic margins and phenocryst-rich rhyolitic interiors, cut the Gouldsboro granite of coastal Maine at many localities. Limited hybridization (exchange of crystals, commingling, and mixing) occurs in most of the dikes and indicates that the two magmas were contemporaneous with emplacement of rhyolitic magma following closely in time the initial emplacement of the basaltic dike. Petrographic characteristics and geochemistry indicate that the source of the rhyolite was resident magma in the Gouldsboro granite magma chamber. The composite dikes formed when basaltic dikes ruptured the Gouldsboro magma chamber, permitting partly crystallized magma from the margin of the chamber to flow outward into the center of the basaltic dikes. Field relations of similar composite dikes in other areas (e.g., Iceland, Scotland) are consistent with this model. A second type of composite dike (silicic margins with chilled basaltic pillows) commonly cuts mafic intrusions along the Maine coast and probably formed when a granitic dike ruptured an established chamber of mafic magma, permitting resident mafic magma to collapse downward into the still Liquid granitic dike. Most composite dikes have probably formed when a magma chamber was disrupted by a dike of contrasting magma rather than by tapping a stratified magma chamber.     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

Elimination of source-generated noise from correlated vibroseis data (the ‘ghost-sweep’ problem)

The most common noise-reduction methods employed in the vibroseis technique (e.g. spike and burst reduction, vertical stacking) are applied in the field to reduce noise at a very early stage. In addition, vibrator phase control systems prevent signal distortions produced by non-linearity of the source itself. However, the success of these automatic correction methods depends on parameter justification by the operator and the actual characteristics of the distorting noise. More specific noise-reduction methods (e.g. Combisweep (Trade mark of Geco-Prakla), elimination of harmonics) increase production costs or need uncorrelated data for the correction process. Because the field data are usually correlated and vertically stacked in the field to minimize logistical and processing costs, it is not possible to make subsequent parameter corrections to optimize the noise reduction after correlation and vertical stacking of a production record. The noise-reduction method described here uses the final recorded, correlated and stacked vibroseis field data. This method eliminates signal artifacts caused e.g. by incorrect vibroseis source signals being used in parameter estimation when a frequency–time analysis is combined with a standard convolution process. Depending on the nature of the distortions, a synthetically generated, nearly recursive noise-separation operator compresses the noise artifact in time using a trace-by-trace filter. After elimination of this compressed noise, re-application of the separation operator leads to a noise-corrected replacement of the input data. The method is applied to a synthetic data set and to a real vibroseis field record from deep seismic sounding, with good results.